From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail.bootlin.com ([62.4.15.54]) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1fLN96-0004PG-PK for linux-mtd@lists.infradead.org; Wed, 23 May 2018 06:21:14 +0000 Date: Wed, 23 May 2018 08:20:47 +0200 From: Boris Brezillon To: Geert Uytterhoeven Cc: David Woodhouse , Brian Norris , Marek Vasut , Richard Weinberger , linux-mtd@lists.infradead.org, Atsushi Nemoto , linux-kernel@vger.kernel.org Subject: Re: [PATCH] mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS Message-ID: <20180523082047.2aa9e6ac@bbrezillon> In-Reply-To: <1527001673-16318-1-git-send-email-geert+renesas@glider.be> References: <1527001673-16318-1-git-send-email-geert+renesas@glider.be> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Tue, 22 May 2018 17:07:53 +0200 Geert Uytterhoeven wrote: > The comment about offset zero was not updated when changing behavior: > - Automatic offset calculation is indicated by OFFSET_CONTINUOUS, > - Zero really means offset zero. > > Fixes: b175d03dd2072836 ("[PATCH] mtd cmdlinepart: allow zero offset value") Did we switch to 16bytes for the short commit ids (I usually use 12 bytes)? > Signed-off-by: Geert Uytterhoeven > --- > drivers/mtd/cmdlinepart.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c > index fbd5affc0acfe3fe..3ea44cff9b759e3c 100644 > --- a/drivers/mtd/cmdlinepart.c > +++ b/drivers/mtd/cmdlinepart.c > @@ -190,7 +190,10 @@ static struct mtd_partition * newpart(char *s, > extra_mem = (unsigned char *)(parts + *num_parts); > } > > - /* enter this partition (offset will be calculated later if it is zero at this point) */ > + /* > + * enter this partition (offset will be calculated later if it is > + * OFFSET_CONTINUOUS at this point) > + */ > parts[this_part].size = size; > parts[this_part].offset = offset; > parts[this_part].mask_flags = mask_flags;