[PATCH 1/3] mtd: rawnand: marvell: remove bogus comment in marvell_nfc_select_chip()

[Daniel Mack <daniel@zonque.org>]

The comment in marvell_nfc_select_chip() about ndtr0 and ndtr1 didn't
reflect what the driver was doing.

The values of NDTR0 and NDTR1 are read from the registers at probe time
and a copy is retained in 'struct marvell_nand_chip'. If keep-config is
set in the DT properties, there are no other writers of these timing
variables so they can safely be used when the chip is selected.

As suggested by Miquel Raynal, simply remove the comment.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---
 drivers/mtd/nand/raw/marvell_nand.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 00d9f29bbdb6..0ffa2eb70ed9 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -650,11 +650,6 @@ static void marvell_nfc_select_chip(struct mtd_info *mtd, int die_nr)
 		return;
 	}
 
-	/*
-	 * Do not change the timing registers when using the DT property
-	 * marvell,nand-keep-config; in that case ->ndtr0 and ->ndtr1 from the
-	 * marvell_nand structure are supposedly empty.
-	 */
 	writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
 	writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
 
-- 
2.17.1