From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Boris Brezillon <boris.brezillon@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Miquel Raynal <miquel.raynal@bootlin.com>,
linux-mtd@lists.infradead.org,
"Bean Huo (beanhuo)" <beanhuo@micron.com>,
Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>
Subject: [PATCH 1/2] mtd: rawnand: micron: Define the proper layout for 8bit/512bytes on-die ECC
Date: Mon, 9 Jul 2018 23:09:36 +0200 [thread overview]
Message-ID: <20180709210937.30150-2-boris.brezillon@bootlin.com> (raw)
In-Reply-To: <20180709210937.30150-1-boris.brezillon@bootlin.com>
The MT29F1G08ABAFAWP datasheet says that all ECC bytes are placed at the
end of the OOB area.
Fixes: 386fc2609d15 ("mtd: rawnand: micron: support 8/512 on-die ECC")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
drivers/mtd/nand/raw/nand_micron.c | 59 ++++++++++++++++++++++++++++++++------
1 file changed, 50 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 754e9cdd44ac..00a965ad7ab2 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -103,8 +103,9 @@ static int micron_nand_onfi_init(struct nand_chip *chip)
return 0;
}
-static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
+static int micron_nand_on_die_4_ooblayout_ecc(struct mtd_info *mtd,
+ int section,
+ struct mtd_oob_region *oobregion)
{
if (section >= 4)
return -ERANGE;
@@ -115,8 +116,9 @@ static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
return 0;
}
-static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
+static int micron_nand_on_die_4_ooblayout_free(struct mtd_info *mtd,
+ int section,
+ struct mtd_oob_region *oobregion)
{
if (section >= 4)
return -ERANGE;
@@ -127,9 +129,44 @@ static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
-static const struct mtd_ooblayout_ops micron_nand_on_die_ooblayout_ops = {
- .ecc = micron_nand_on_die_ooblayout_ecc,
- .free = micron_nand_on_die_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_nand_on_die_4_ooblayout_ops = {
+ .ecc = micron_nand_on_die_4_ooblayout_ecc,
+ .free = micron_nand_on_die_4_ooblayout_free,
+};
+
+static int micron_nand_on_die_8_ooblayout_ecc(struct mtd_info *mtd,
+ int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = mtd->oobsize - chip->ecc.total;
+ oobregion->length = chip->ecc.total;
+
+ return 0;
+}
+
+static int micron_nand_on_die_8_ooblayout_free(struct mtd_info *mtd,
+ int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 2;
+ oobregion->length = mtd->oobsize - chip->ecc.total - 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops micron_nand_on_die_8_ooblayout_ops = {
+ .ecc = micron_nand_on_die_8_ooblayout_ecc,
+ .free = micron_nand_on_die_8_ooblayout_free,
};
static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable)
@@ -425,6 +462,12 @@ static int micron_nand_init(struct nand_chip *chip)
ret = -ENOMEM;
goto err_free_manuf_data;
}
+
+ mtd_set_ooblayout(mtd,
+ µn_nand_on_die_4_ooblayout_ops);
+ } else {
+ mtd_set_ooblayout(mtd,
+ µn_nand_on_die_8_ooblayout_ops);
}
chip->ecc.bytes = chip->ecc_strength_ds * 2;
@@ -435,8 +478,6 @@ static int micron_nand_init(struct nand_chip *chip)
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
chip->ecc.read_page_raw = nand_read_page_raw;
chip->ecc.write_page_raw = nand_write_page_raw;
-
- mtd_set_ooblayout(mtd, µn_nand_on_die_ooblayout_ops);
}
return 0;
--
2.14.1
next prev parent reply other threads:[~2018-07-09 21:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-09 21:09 [PATCH 0/2] mtd: rawnand: micron: Fix on-die ECC Boris Brezillon
2018-07-09 21:09 ` Boris Brezillon [this message]
2018-07-16 8:37 ` [PATCH 1/2] mtd: rawnand: micron: Define the proper layout for 8bit/512bytes " Chris Packham
2018-07-09 21:09 ` [PATCH 2/2] mtd: rawnand: micron: Fix on-die ECC detection logic Boris Brezillon
2018-07-16 8:36 ` Chris Packham
2018-07-10 8:10 ` [PATCH 0/2] mtd: rawnand: micron: Fix on-die ECC Boris Brezillon
2018-07-10 21:40 ` Chris Packham
2018-07-16 8:07 ` Chris Packham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180709210937.30150-2-boris.brezillon@bootlin.com \
--to=boris.brezillon@bootlin.com \
--cc=beanhuo@micron.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox