Re: [PATCH RESEND v3] mtd: rawnand: ams-delta: use GPIO lookup table

[Boris Brezillon <boris.brezillon@bootlin.com>]

+Tony

On Tue, 17 Jul 2018 19:05:52 +0200
Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote:

> Now as Amstrad Delta board - the only user of this driver - provides
> GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and
> use the table to locate required GPIO pins.
> 
> Declare static variables for storing GPIO descriptors and replace
> gpio_ function calls with their gpiod_ equivalents.
> 
> Pin naming used by the driver should be followed while respective GPIO
> lookup table is initialized by a board init code.
> 
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>

Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>

Just a minor comment below (nothing important, just a coding style
preference).

Also, if it goes through the omap tree (I guess it will target 4.20),
I'll need an immutable tag, because I have changes touching this driver
in the pipe (that's more a request for Tony).


> @@ -230,9 +205,42 @@ static int ams_delta_init(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, io_base);
>  
>  	/* Set chip enabled, but  */
> -	err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
> -	if (err)
> -		goto out_gpio;
> +	gpiod_nwp = devm_gpiod_get(&pdev->dev, "nwp", GPIOD_OUT_HIGH);
> +	if (IS_ERR(gpiod_nwp)) {
> +		err = PTR_ERR(gpiod_nwp);
> +		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
> +		goto out_mtd;
> +	}

Can you add a blank line after each if (IS_ERR(gpiod_nwp)) { } block.

> +	gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
> +	if (IS_ERR(gpiod_nce)) {
> +		err = PTR_ERR(gpiod_nce);
> +		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
> +		goto out_mtd;
> +	}
> +	gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
> +	if (IS_ERR(gpiod_nre)) {
> +		err = PTR_ERR(gpiod_nre);
> +		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
> +		goto out_mtd;
> +	}
> +	gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
> +	if (IS_ERR(gpiod_nwe)) {
> +		err = PTR_ERR(gpiod_nwe);
> +		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
> +		goto out_mtd;
> +	}
> +	gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
> +	if (IS_ERR(gpiod_ale)) {
> +		err = PTR_ERR(gpiod_ale);
> +		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
> +		goto out_mtd;
> +	}
> +	gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
> +	if (IS_ERR(gpiod_cle)) {
> +		err = PTR_ERR(gpiod_cle);
> +		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
> +		goto out_mtd;
> +	}
>  
>  	/* Scan to find existence of the device */
>  	err = nand_scan(ams_delta_mtd, 1);