From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Stefan Agner <stefan@agner.ch>,
miquel.raynal@free-electrons.com,
boris.brezillon@free-electrons.com, computersforpeace@gmail.com,
dwmw2@infradead.org, marek.vasut@gmail.com,
cyrille.pitchen@wedev4u.fr, richard@nod.at,
bpringlemeir@gmail.com, marcel.ziswiler@toradex.com,
linux-mtd@lists.infradead.org
Subject: Re: [PATCH v8 1/3] mtd: rawnand: vf610_nfc: make use of ->exec_op()
Date: Tue, 17 Jul 2018 23:03:18 +0200 [thread overview]
Message-ID: <20180717230318.2a302556@xps13> (raw)
In-Reply-To: <20180712235725.1dc96dea@bbrezillon>
Hi Stefan,
Boris Brezillon <boris.brezillon@bootlin.com> wrote on Thu, 12 Jul 2018
23:57:25 +0200:
> On Thu, 12 Jul 2018 23:41:05 +0200
> Boris Brezillon <boris.brezillon@bootlin.com> wrote:
>
> > On Thu, 12 Jul 2018 22:57:37 +0200
> > Stefan Agner <stefan@agner.ch> wrote:
> >
> > > On 18.03.2018 16:59, Stefan Agner wrote:
> > > > This reworks the driver to make use of ->exec_op() callback. The
> > > > command sequencer of the VF610 NFC aligns well with the new ops
> > > > interface.
> > > >
> > > > The operations are translated to a NFC command code while filling
> > > > the necessary registers. Instead of using the special status and
> > > > read ID command codes (which require to read status/ID from
> > > > special registers instead of the regular data area) the driver
> > > > now now uses the main data buffer for all commands. This
> > > > simplifies the driver as no special casing is needed.
> > > >
> > > > For control data (status byte, id bytes and parameter page) the
> > > > driver needs to reverse byte order for little endian CPUs since
> > > > the controller seems to store the bytes in big endian order in
> > > > the data buffer.
> > > >
> > > > The current state seems to pass MTD tests on a Colibri VF61.
> > >
> > > It turns out that after around 50-200 boots this leads to a kernel
> > > lockup. Reverting this patch seems to help:
> > >
> > > [ 4.327685] ubi0: default fastmap pool size: 50
> > > [ 4.332709] ubi0: default fastmap WL pool size: 25
> > > [ 4.338201] ubi0: attaching mtd3
> > > [ 4.409501] random: fast init done
> > > [ 4.615404] ubi0: attached by fastmap
> > > [ 4.619563] ubi0: fastmap pool size: 50
> > > [ 4.623631] ubi0: fastmap WL pool size: 25
> > > [ 4.662871] ubi0: attached mtd3 (name "ubi", size 126 MiB)
> > > [ 4.669108] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
> > > [ 4.676681] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
> > > [ 4.683852] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
> > > [ 4.691528] ubi0: good PEBs: 1001, bad PEBs: 7, corrupted PEBs: 0
> > > [ 4.698231] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
> > > [ 4.706157] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1281767328
> > > [ 4.716037] ubi0: available PEBs: 0, total reserved PEBs: 1001, PEBs reserved for bad PEB handling: 13
> > > [ 4.726666] ubi0: background thread "ubi_bgt0d" started, PID 60
> > > [ 4.743297] rtc-ds1307 0-0068: setting system clock to 2001-01-01 00:06:44 UTC (978307604)
> > > [ 4.756117] cfg80211: Loading compiled-in X.509 certificates for regulatory database
> > > [ 4.777983] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> > > [ 4.830932] hrtimer: interrupt took 30379848 ns
> > > [ 12.135872] ALSA device list:
> > > [ 12.555474] No soundcards found.
> > > [ 47.420730] INFO: rcu_sched self-detected stall on CPU
> > > [ 47.446162] 0-...!: (2592 ticks this GP) idle=3c2/1/1073741826 softirq=70/70 fqs=0
> > > [ 47.464623] (t=2600 jiffies g=-242 c=-243 q=2)
> > > [ 47.475431] rcu_sched kthread starved for 2600 jiffies! g4294967054 c4294967053 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0
> > > [ 47.489822] RCU grace-period kthread stack dump:
> > > [ 47.497199] rcu_sched I 0 10 2 0x00000000
> > > [ 47.506163] Backtrace:
> > > [ 47.514811] [<c0bd47a0>] (__schedule) from [<c0bd52f0>] (schedule+0x48/0xac)
> > > [ 47.525962] r10:c10b26d9 r9:c1005900 r8:c7cdd500 r7:c10088c8 r6:c7cdd500 r5:c4129ec4
> > > [ 47.536345] r4:ffffe000
> > > [ 47.542663] [<c0bd52a8>] (schedule) from [<c0bda574>] (schedule_timeout+0xa0/0x564)
> > > [ 47.553692] r5:c4129ec4 r4:ffff932e
> > > [ 47.563375] [<c0bda4d4>] (schedule_timeout) from [<c01a6eac>] (rcu_gp_kthread+0x670/0x189c)
> > > [ 47.575609] r10:c101ce78 r9:c101cbc0 r8:c1005900 r7:ffffe000 r6:00000402 r5:c101ce50
> > > [ 47.585966] r4:00000001
> > > [ 47.592163] [<c01a683c>] (rcu_gp_kthread) from [<c0151448>] (kthread+0x154/0x16c)
> > > [ 47.603068] r7:c4128000
> > > [ 47.608760] [<c01512f4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
> > > [ 47.619396] Exception stack(0xc4129fb0 to 0xc4129ff8)
> > > [ 47.627264] 9fa0: 00000000 00000000 00000000 00000000
> > > [ 47.638076] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > > [ 47.648825] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > > [ 47.658059] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c01512f4
> > > [ 47.668567] r4:c40f7100
> > > [ 47.682794] NMI backtrace for cpu 0
> > > [ 47.692049] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4 #120
> > > [ 47.701839] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
> > > [ 47.710436] Backtrace:
> > > [ 47.717705] [<c010e814>] (dump_backtrace) from [<c010eac4>] (show_stack+0x20/0x24)
> > > [ 47.728904] r7:00000000 r6:60000193 r5:00000000 r4:c10abff4
> > > [ 47.738832] [<c010eaa4>] (show_stack) from [<c0bbd144>] (dump_stack+0xb4/0xec)
> > > [ 47.750608] [<c0bbd090>] (dump_stack) from [<c0bc3ca0>] (nmi_cpu_backtrace+0x10c/0x120)
> > > [ 47.762041] r10:80000193 r9:c1008970 r8:c0c02be8 r7:00000000 r6:00000000 r5:00000000
> > > [ 47.772442] r4:c182d928 r3:b15a9cad
> > > [ 47.778946] [<c0bc3b94>] (nmi_cpu_backtrace) from [<c0bc3d88>] (nmi_trigger_cpumask_backtrace+0xd4/0x128)
> > > [ 47.791492] r7:00000000 r6:c01105f4 r5:c100bef0 r4:00000000
> > > [ 47.800780] [<c0bc3cb4>] (nmi_trigger_cpumask_backtrace) from [<c011146c>] (arch_trigger_cpumask_backtrace+0x1c/0x24)
> > > [ 47.814575] r9:c1008970 r8:00000240 r7:c0c02be4 r6:c10088f4 r5:c101cbc0 r4:c101cbc0
> > > [ 47.826007] [<c0111450>] (arch_trigger_cpumask_backtrace) from [<c01adfd4>] (rcu_dump_cpu_stacks+0xb4/0xf4)
> > > [ 47.839338] [<c01adf20>] (rcu_dump_cpu_stacks) from [<c01acc44>] (rcu_check_callbacks+0x7ec/0xaa4)
> > > [ 47.851266] r10:c1008e38 r9:c1008968 r8:c101cbc0 r7:06d21000 r6:c7ce2d00 r5:c0fc1d00
> > > [ 47.861815] r4:c101cbc0
> > > [ 47.868917] [<c01ac458>] (rcu_check_callbacks) from [<c01b58f8>] (update_process_times+0x40/0x6c)
> > > [ 47.881573] r10:c10088ec r9:c7cde600 r8:c01cb8f4 r7:0000000b r6:00000000 r5:c4108000
> > > [ 47.891955] r4:ffffe000
> > > [ 47.898511] [<c01b58b8>] (update_process_times) from [<c01cb68c>] (tick_sched_handle+0x64/0x68)
> > > [ 47.910900] r7:0000000b r6:09f63806 r5:c4103d38 r4:c7cdea98
> > > [ 47.919562] [<c01cb628>] (tick_sched_handle) from [<c01cb960>] (tick_sched_timer+0x6c/0xd0)
> > > [ 47.932061] [<c01cb8f4>] (tick_sched_timer) from [<c01b66e0>] (__hrtimer_run_queues+0x194/0x634)
> > > [ 47.944036] r7:c10416d4 r6:00000000 r5:c7cdea98 r4:c7cde660
> > > [ 47.952849] [<c01b654c>] (__hrtimer_run_queues) from [<c01b7e70>] (hrtimer_interrupt+0x124/0x2ec)
> > > [ 47.964708] r10:c7cde740 r9:ffffffff r8:7fffffff r7:c7cde700 r6:00000003 r5:20000193
> > > [ 47.975066] r4:c7cde600
> > > [ 47.980799] [<c01b7d4c>] (hrtimer_interrupt) from [<c087f068>] (gt_clockevent_interrupt+0x4c/0x68)
> > > [ 47.992829] r10:c10b26ac r9:00000010 r8:c1008e38 r7:c10088ec r6:c800c200 r5:c7ce3b00
> > > [ 48.003230] r4:00000001
> > > [ 48.010306] [<c087f01c>] (gt_clockevent_interrupt) from [<c01970e8>] (handle_percpu_devid_irq+0xec/0x430)
> > > [ 48.023497] r7:c10088ec r6:c100905c r5:c40dc680 r4:c40c9a00
> > > [ 48.032720] [<c0196ffc>] (handle_percpu_devid_irq) from [<c0191a68>] (generic_handle_irq+0x30/0x44)
> > > [ 48.045102] r10:c1041928 r9:c401a400 r8:00000001 r7:00000000 r6:c1008e38 r5:00000010
> > > [ 48.055221] r4:c0fc112c
> > > [ 48.060592] [<c0191a38>] (generic_handle_irq) from [<c0191af0>] (__handle_domain_irq+0x74/0xf0)
> > > [ 48.073419] [<c0191a7c>] (__handle_domain_irq) from [<c01023dc>] (gic_handle_irq+0x68/0xcc)
> > > [ 48.084801] r9:c4103d38 r8:c100905c r7:c8002100 r6:000003ff r5:000003eb r4:c800210c
> > > [ 48.095734] [<c0102374>] (gic_handle_irq) from [<c0101a30>] (__irq_svc+0x70/0x98)
> > > [ 48.106321] Exception stack(0xc4103d38 to 0xc4103d80)
> > > [ 48.113845] 3d20: 00000001 00000001
> > > [ 48.124357] 3d40: 00000000 c4108000 c7ce2600 00000000 c102d7f8 c410e400 00000000 c0bd4a6c
> > > [ 48.134917] 3d60: c4108000 c4103d9c 00000000 c4103d88 c0180a74 c0bdb778 20000013 ffffffff
> > > [ 48.145628] r10:c4108000 r9:c4102000 r8:00000000 r7:c4103d6c r6:ffffffff r5:20000013
> > > [ 48.155699] r4:c0bdb778
> > > [ 48.163614] [<c0bdb740>] (_raw_spin_unlock_irq) from [<c015a310>] (finish_task_switch+0xbc/0x274)
> > > [ 48.176306] r5:00000000 r4:c7ce2600
> > > [ 48.183676] [<c015a254>] (finish_task_switch) from [<c0bd4a6c>] (__schedule+0x2cc/0xad4)
> > > [ 48.195315] r10:c10b3ae0 r9:c102d7f8 r8:00000000 r7:c7ce2610 r6:c42a8000 r5:c4108000
> > > [ 48.205648] r4:c7ce2600
> > > [ 48.210929] [<c0bd47a0>] (__schedule) from [<c0bd528c>] (preempt_schedule_common+0x18/0x34)
> > > [ 48.222162] r10:c10b7d00 r9:c40dd3c0 r8:c02a7900 r7:c1008f84 r6:ffffff9c r5:006000c0
> > > [ 48.232651] r4:ffffe000
> > > [ 48.237849] [<c0bd5274>] (preempt_schedule_common) from [<c0bd54bc>] (_cond_resched+0x50/0x58)
> > > [ 48.249555] r5:006000c0 r4:00000001
> > > [ 48.257127] [<c0bd546c>] (_cond_resched) from [<c028f728>] (kmem_cache_alloc+0x1f0/0x31c)
> > > [ 48.268169] r5:006000c0 r4:006000c0
> > > [ 48.275478] [<c028f538>] (kmem_cache_alloc) from [<c02a7900>] (getname_flags+0x30/0x160)
> > > [ 48.286767] r10:c10b7d00 r9:00000000 r8:00000000 r7:c1008f84 r6:ffffff9c r5:c0e0560c
> > > [ 48.297226] r4:00000002
> > > [ 48.302911] [<c02a78d0>] (getname_flags) from [<c02a7a50>] (getname+0x20/0x24)
> > > [ 48.313300] r10:c10b7d00 r9:c10088ec r8:c0f7c85c r7:00000000 r6:ffffff9c r5:c10088c8
> > > [ 48.323768] r4:00000002 r3:00000002
> > > [ 48.330039] [<c02a7a30>] (getname) from [<c029854c>] (do_sys_open+0xfc/0x21c)
> > > [ 48.341558] [<c0298450>] (do_sys_open) from [<c0f01878>] (kernel_init_freeable+0x3a4/0x460)
> > > [ 48.352809] r10:c10b7d00 r9:c10088ec r8:c0f7c85c r7:c10b7d00 r6:c10b3900 r5:c0fb7140
> > > [ 48.363206] r4:00000008
> > > [ 48.370025] [<c0f014d4>] (kernel_init_freeable) from [<c0bd2704>] (kernel_init+0x18/0x128)
> > > [ 48.381584] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0bd26ec
> > > [ 48.392130] r4:00000000
> > > [ 48.397585] [<c0bd26ec>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)
> > > [ 48.407874] Exception stack(0xc4103fb0 to 0xc4103ff8)
> > > [ 48.415229] 3fa0: 00000000 00000000 00000000 00000000
> > > [ 48.425675] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > > [ 48.436255] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > > [ 48.445286] r5:c0bd26ec r4:00000000
> > >
> > >
> > > Still need to investigate further, but if anybody has an idea/spot can
> > > spot the potential problem, I am all ears :-)
> >
> > Probably a problem related to IRQs. Add a trace in you interrupt
> > handler to print the status. Maybe one of the IRQ is not properly
> > cleared/masked.
>
> Try to clear WERREN, DONEEN and IDLEEN at probe time. Only enable them
> when you are actually waiting for such events and disable them as soon
> as you're done waiting (after a timeout or when you received the
> event you were waiting for in the interrupt handler). Also, in your
> interrupt handler, you only clear IDLE_EN. You should probably clear
> all other events you might have received. And of course,
> vf610_nfc_clear_status() should be called before setting IDLE_EN in
> vf610_nfc_done(), otherwise the completion might be triggered on one
> of the previous event instead of the one you are waiting for.
Could you get some time to check the above advice?
Thanks,
Miquèl
next prev parent reply other threads:[~2018-07-17 21:03 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-18 15:59 [PATCH v8 0/3] mtd: rawnand: vf610_nfc: make use of ->exec_op() Stefan Agner
2018-03-18 15:59 ` [PATCH v8 1/3] " Stefan Agner
2018-07-12 20:57 ` Stefan Agner
2018-07-12 21:41 ` Boris Brezillon
2018-07-12 21:57 ` Boris Brezillon
2018-07-17 21:03 ` Miquel Raynal [this message]
2018-07-18 8:11 ` Marcel Ziswiler
2018-07-26 16:51 ` Stefan Agner
2018-07-26 18:21 ` Boris Brezillon
2018-07-30 8:46 ` Stefan Agner
2018-07-30 18:42 ` Boris Brezillon
2018-03-18 15:59 ` [PATCH v8 2/3] mtd: rawnand: vf610_nfc: remove old hooks Stefan Agner
2018-03-18 15:59 ` [PATCH v8 3/3] mtd: rawnand: vf610_nfc: support ONFI SET/GET_FEATURES commands Stefan Agner
2018-03-18 21:18 ` [PATCH v8 0/3] mtd: rawnand: vf610_nfc: make use of ->exec_op() Boris Brezillon
2018-03-19 22:24 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180717230318.2a302556@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=boris.brezillon@bootlin.com \
--cc=boris.brezillon@free-electrons.com \
--cc=bpringlemeir@gmail.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marcel.ziswiler@toradex.com \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@free-electrons.com \
--cc=richard@nod.at \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).