Re: [PATCH 1/2] mtd: spi-nor: cadence-quadspi: fix timeout handling in wait_for_completion_timeout

[Nicholas Mc Guire <der.herr@hofr.at>]

On Sat, Jul 21, 2018 at 09:11:51PM +0530, Vignesh R wrote:
> Hi,
> 
> On 21-Jul-18 7:51 PM, Nicholas Mc Guire wrote:
> > wait_for_completion_timeout returns unsigned long not int so a variable of
> > proper type is introduced. Further the check for <= 0 is ambiguous and should
> > be == 0 here.
> >
> 
> Oops, my bad. Thanks for the fix! I see you have fixed similar bug in
> cqspi_indirect_read_execute(). There is similar code in
> cqspi_indirect_write_execute(). Could you fix that as well?
>

nice - so you just found a bug in my coccinelle script as it did not catch
that case of wrong type (which it should) - thanks ! 
will send a patch shortly.
 
> Regards
> Vignesh
> 
> 
> > Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
> > Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads")
> > ---
> > 
> > Patch found by experimental coccinelle API conformance checker
> >> Patch was compile tested with: socfpga_defconfig (implies
> > CONFIG_SPI_CADENCE_QUADSPI=y)
> > 
> > Patch is against 4.18-rc5 (localversion-next is next-20180720)
> > 
> >  drivers/mtd/spi-nor/cadence-quadspi.c | 7 ++++---
> >  1 file changed, 4 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> > index d7e10b3..79f6a54 100644
> > --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> > +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> > @@ -953,6 +953,7 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf,
> >  	enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
> >  	dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from;
> >  	int ret = 0;
> > +	unsigned long timeout;
> >  	struct dma_async_tx_descriptor *tx;
> >  	dma_cookie_t cookie;
> >  	dma_addr_t dma_dst;
> > @@ -988,9 +989,9 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf,
> >  	}
> >  
> >  	dma_async_issue_pending(cqspi->rx_chan);
> > -	ret = wait_for_completion_timeout(&cqspi->rx_dma_complete,
> > -					  msecs_to_jiffies(len));
> > -	if (ret <= 0) {
> > +	timeout = wait_for_completion_timeout(&cqspi->rx_dma_complete,
> > +					      msecs_to_jiffies(len));
> > +	if (timeout == 0) {
> >  		dmaengine_terminate_sync(cqspi->rx_chan);
> >  		dev_err(nor->dev, "DMA wait_for_completion_timeout\n");
> >  		ret = -ETIMEDOUT;
> >