From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
linux-mtd@lists.infradead.org,
Wenyou Yang <wenyou.yang@microchip.com>,
Josh Wu <rainyfeeling@outlook.com>,
Stefan Agner <stefan@agner.ch>, Lucas Stach <dev@lynxeye.de>
Subject: Re: [PATCH v5 03/17] mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()
Date: Wed, 25 Jul 2018 17:38:16 +0200 [thread overview]
Message-ID: <20180725173816.71da16b5@bbrezillon> (raw)
In-Reply-To: <20180725133152.30898-4-miquel.raynal@bootlin.com>
On Wed, 25 Jul 2018 15:31:38 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> Two helpers have been added to the core to do all kind of controller
> side configuration/initialization between the detection phase and the
> final NAND scan. Implement these hooks so that we can convert the driver
> to just use nand_scan() instead of the nand_scan_ident() +
> nand_scan_tail() pair.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> drivers/mtd/nand/raw/lpc32xx_mlc.c | 61 +++++++++++++++++++++-----------------
> 1 file changed, 33 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
> index 052d123a8304..e82abada130a 100644
> --- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
> +++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
> @@ -184,6 +184,7 @@ static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = {
> };
>
> struct lpc32xx_nand_host {
> + struct platform_device *pdev;
You don't need pdev. With this field removed
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
> struct nand_chip nand_chip;
> struct lpc32xx_mlc_platform_data *pdata;
> struct clk *clk;
> @@ -653,6 +654,32 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
> return ncfg;
> }
>
> +static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
> +{
> + struct mtd_info *mtd = nand_to_mtd(chip);
> + struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
> + struct device *dev = &host->pdev->dev;
> +
> + host->dma_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL);
> + if (!host->dma_buf)
> + return -ENOMEM;
> +
> + host->dummy_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL);
> + if (!host->dummy_buf)
> + return -ENOMEM;
> +
> + chip->ecc.mode = NAND_ECC_HW;
> + chip->ecc.size = 512;
> + mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
> + host->mlcsubpages = mtd->writesize / 512;
> +
> + return 0;
> +}
> +
> +static const struct nand_controller_ops lpc32xx_nand_controller_ops = {
> + .attach_chip = lpc32xx_nand_attach_chip,
> +};
> +
> /*
> * Probe for NAND controller
> */
> @@ -669,6 +696,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
> if (!host)
> return -ENOMEM;
>
> + host->pdev = pdev;
> +
> rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> host->io_base = devm_ioremap_resource(&pdev->dev, rc);
> if (IS_ERR(host->io_base))
> @@ -748,31 +777,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
> }
> }
>
> - /*
> - * Scan to find existance of the device and
> - * Get the type of NAND device SMALL block or LARGE block
> - */
> - res = nand_scan_ident(mtd, 1, NULL);
> - if (res)
> - goto release_dma_chan;
> -
> - host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
> - if (!host->dma_buf) {
> - res = -ENOMEM;
> - goto release_dma_chan;
> - }
> -
> - host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
> - if (!host->dummy_buf) {
> - res = -ENOMEM;
> - goto release_dma_chan;
> - }
> -
> - nand_chip->ecc.mode = NAND_ECC_HW;
> - nand_chip->ecc.size = 512;
> - mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
> - host->mlcsubpages = mtd->writesize / 512;
> -
> /* initially clear interrupt status */
> readb(MLC_IRQ_SR(host->io_base));
>
> @@ -794,10 +798,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
> }
>
> /*
> - * Fills out all the uninitialized function pointers with the defaults
> - * And scans for a bad block table if appropriate.
> + * Scan to find existence of the device and get the type of NAND device:
> + * SMALL block or LARGE block.
> */
> - res = nand_scan_tail(mtd);
> + nand_chip->dummy_controller.ops = &lpc32xx_nand_controller_ops;
> + res = nand_scan(mtd, 1);
> if (res)
> goto free_irq;
>
next prev parent reply other threads:[~2018-07-25 15:38 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-25 13:31 [PATCH v5 00/17] Allow dynamic allocations during NAND chip identification phase Miquel Raynal
2018-07-25 13:31 ` [PATCH v5 01/17] mtd: rawnand: brcmnand: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:22 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 02/17] mtd: rawnand: cafe: " Miquel Raynal
2018-07-25 15:34 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 03/17] mtd: rawnand: lpc32xx_mlc: " Miquel Raynal
2018-07-25 15:38 ` Boris Brezillon [this message]
2018-07-25 13:31 ` [PATCH v5 04/17] mtd: rawnand: omap2: " Miquel Raynal
2018-07-25 15:39 ` Boris Brezillon
2018-12-13 18:01 ` [v5,04/17] " Alexander Sverdlin
2018-12-13 18:30 ` Boris Brezillon
2018-12-13 18:37 ` Boris Brezillon
2018-12-13 19:06 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 05/17] mtd: rawnand: atmel: clarify NAND addition/removal paths Miquel Raynal
2018-07-25 15:42 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 06/17] mtd: rawnand: atmel: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:43 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 07/17] mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero Miquel Raynal
2018-07-25 15:44 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 08/17] mtd: rawnand: docg4: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:47 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 09/17] mtd: rawnand: jz4740: fix probe function error path Miquel Raynal
2018-07-25 15:48 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 10/17] mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls Miquel Raynal
2018-07-25 15:54 ` [PATCH v5 10/17] mtd: rawnand: jz4740: group nand_scan_{ident,tail} calls Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 11/17] mtd: rawnand: jz4740: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:55 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 12/17] mtd: rawnand: tegra: " Miquel Raynal
2018-07-25 15:56 ` Boris Brezillon
2018-07-26 16:29 ` Stefan Agner
2018-07-26 18:01 ` Boris Brezillon
2018-07-27 7:13 ` Stefan Agner
2018-07-27 8:06 ` Miquel Raynal
2018-07-27 8:33 ` Stefan Agner
2018-07-25 13:31 ` [PATCH v5 13/17] mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation Miquel Raynal
2018-07-25 15:57 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 14/17] mtd: rawnand: txx9ndfmc: convert driver to nand_scan() Miquel Raynal
2018-07-25 13:31 ` [PATCH v5 15/17] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore Miquel Raynal
2018-07-25 15:59 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 16/17] mtd: rawnand: allocate model parameter dynamically Miquel Raynal
2018-07-25 13:31 ` [PATCH v5 17/17] mtd: rawnand: allocate dynamically ONFI parameters during detection Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180725173816.71da16b5@bbrezillon \
--to=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dev@lynxeye.de \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=rainyfeeling@outlook.com \
--cc=richard@nod.at \
--cc=stefan@agner.ch \
--cc=wenyou.yang@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).