Re: [PATCH v2] mtd: spi-nor: Use DMA-safe buffer for JEDEC ID in spi_nor_read_id()

[Boris Brezillon <boris.brezillon@bootlin.com>]

On Mon, 17 Sep 2018 11:10:18 +0300
Jarkko Nikula <jarkko.nikula@linux.intel.com> wrote:

> After commit 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API")
> there is no allocation for DMA-safe buffer when transmitting data bytes
> over SPI bus in m25p80 driver.
> 
> JEDEC ID reading in spi_nor_read_id() has the buffer in stack. This is
> not safe with the m25p80 driver anymore after commit 4120f8d158ef if
> underlying SPI controller is using DMA for transfers.
> 
> Therefore allocate a temporary DMA-safe buffer for JEDEC ID reading.
> 
> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Oh, I forgot to mention that you should have Cc and Fixes tag here, to
make sure the patch gets backported to 4.18:

Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API")
Cc: <stable@vger.kernel.org>

No need to send a new version, I can add them when applying.

> ---
> v2: Drop GFP_DMA.
> 
> I'm not an spi-nor expert at all but noticed this "WARNING: CPU: 3 PID: 154
> at kernel/dma/debug.c:1191 check_for_stack+0xc2/0x1a0" after
> 4120f8d158ef since my test setup has DMA debugging enabled and using DMA
> for SPI.
> I don't know are there other places that may transfer from stack but it
> looked potentially better to have the buffer allocated in
> spi_nor_read_id() instead of doing allocation & copy all the places
> that 4120f8d158ef touches.
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 24 ++++++++++++++++++------
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index f028277fb1ce..f186b95c55f9 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1269,25 +1269,37 @@ static const struct flash_info spi_nor_ids[] = {
>  static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
>  {
>  	int			tmp;
> -	u8			id[SPI_NOR_MAX_ID_LEN];
> -	const struct flash_info	*info;
> +	u8			*id;
> +	const struct flash_info	*info, *ret;
> +
> +	id = kzalloc(SPI_NOR_MAX_ID_LEN, GFP_KERNEL);
> +	if (!id) {
> +		ret = ERR_PTR(ENOMEM);
> +		goto out;
> +	}
>  
>  	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
>  	if (tmp < 0) {
>  		dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
> -		return ERR_PTR(tmp);
> +		ret = ERR_PTR(tmp);
> +		goto out;
>  	}
>  
>  	for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
>  		info = &spi_nor_ids[tmp];
>  		if (info->id_len) {
> -			if (!memcmp(info->id, id, info->id_len))
> -				return &spi_nor_ids[tmp];
> +			if (!memcmp(info->id, id, info->id_len)) {
> +				ret = &spi_nor_ids[tmp];
> +				goto out;
> +			}
>  		}
>  	}
>  	dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
>  		id[0], id[1], id[2]);
> -	return ERR_PTR(-ENODEV);
> +	ret = ERR_PTR(-ENODEV);
> +out:
> +	kfree(id);
> +	return ret;
>  }
>  
>  static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,