From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail.bootlin.com ([62.4.15.54]) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1g7d5z-0007xN-M7 for linux-mtd@lists.infradead.org; Wed, 03 Oct 2018 09:05:29 +0000 From: Miquel Raynal To: Boris Brezillon , Richard Weinberger , David Woodhouse , Brian Norris , Marek Vasut Cc: linux-mtd@lists.infradead.org, daniel@zonque.org, Chris.Packham@alliedtelesis.co.nz, Miquel Raynal , stable@vger.kernel.org Subject: [PATCH] mtd: rawnand: marvell: fix the IRQ handler complete() condition Date: Wed, 3 Oct 2018 11:05:04 +0200 Message-Id: <20181003090504.19910-1-miquel.raynal@bootlin.com> List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , With the current implementation, the complete() in the IRQ handler is supposed to be called only if the register status has one or the other RDY bit set. Other events might trigger an interrupt as well if enabled, but should not end-up with a complete() call. For this purpose, the code was checking if the other bits were set, in this case complete() was not called. This is wrong as two events might happen in a very tight time-frame and if the NDSR status read reports two bits set (eg. RDY(0) and RDDREQ) at the same time, complete() was not called. This logic would lead to timeouts in marvell_nfc_wait_op() and has been observed on PXA boards (NFCv1) in the Hamming write path. Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable@vger.kernel.org Reported-by: Daniel Mack Signed-off-by: Miquel Raynal Tested-by: Daniel Mack --- drivers/mtd/nand/raw/marvell_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index bc2ef5209783..c7573ccdbacd 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -686,7 +686,7 @@ static irqreturn_t marvell_nfc_isr(int irq, void *dev_id) marvell_nfc_disable_int(nfc, st & NDCR_ALL_INT); - if (!(st & (NDSR_RDDREQ | NDSR_WRDREQ | NDSR_WRCMDREQ))) + if (st & (NDSR_RDY(0) | NDSR_RDY(1))) complete(&nfc->complete); return IRQ_HANDLED; -- 2.17.1