Re: [PATCH 2/3] mtd: cfi_cmdset_0002: Remove chip_ready() from do_write_buffer()

[Boris Brezillon <boris.brezillon@bootlin.com>]

On Fri, 19 Oct 2018 17:13:19 +0900
Tokunori Ikegami <ikegami@allied-telesis.co.jp> wrote:

> It is enough to use chip_good() only so chip_ready() is not necessary.
> For this change the order to check timeout is also needed to chagne.

								^ change

And again, you're not explaining why.

> 
> Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
> Cc: Fabio Bettoni <fbettoni@gmail.com>
> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
> Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
> Cc: linux-mtd@lists.infradead.org
> ---
>  drivers/mtd/chips/cfi_cmdset_0002.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
> index 251c9e1675bd..c2e51768a02c 100644
> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> @@ -1882,14 +1882,14 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
>  			continue;
>  		}
>  
> -		if (time_after(jiffies, timeo) && !chip_ready(map, adr))
> -			break;
> -
>  		if (chip_good(map, adr, datum)) {
>  			xip_enable(map, chip, adr);
>  			goto op_done;
>  		}
>  
> +		if (time_after(jiffies, timeo))
> +			break;
> +
>  		/* Latency issues. Drop the lock, wait a while and retry */
>  		UDELAY(map, chip, adr, 1);
>  	}