Re: [PATCH] mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Boris,

Boris Brezillon <boris.brezillon@bootlin.com> wrote on Sun, 16 Dec 2018
09:34:17 +0100:

> The opcodes used by the controller when doing batched page prog should
> be written in NFC_REG_WCMD_SET not FC_REG_RCMD_SET. Luckily, the
> default NFC_REG_WCMD_SET value matches the one we set in the driver
> which explains why we didn't notice the problem.
> 
> Fixes: 614049a8d904 ("mtd: nand: sunxi: add support for DMA assisted operations")
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
>  drivers/mtd/nand/raw/sunxi_nand.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
> index a5c83cbe4897..e828ee50a201 100644
> --- a/drivers/mtd/nand/raw/sunxi_nand.c
> +++ b/drivers/mtd/nand/raw/sunxi_nand.c
> @@ -1393,7 +1393,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct nand_chip *chip,
>  	sunxi_nfc_randomizer_enable(mtd);
>  
>  	writel((NAND_CMD_RNDIN << 8) | NAND_CMD_PAGEPROG,
> -	       nfc->regs + NFC_REG_RCMD_SET);
> +	       nfc->regs + NFC_REG_WCMD_SET);
>  
>  	dma_async_issue_pending(nfc->dmac);
>  

Applied to nand/next.


Thanks,
Miquèl