public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Boris Brezillon <bbrezillon@kernel.org>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>
Cc: Vignesh R <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@microchip.com>,
	Julien Su <juliensu@mxic.com.tw>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	linux-mtd@lists.infradead.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 08/15] mtd: rawnand: Initialize the nand_device object
Date: Mon,  4 Mar 2019 21:15:15 +0100	[thread overview]
Message-ID: <20190304201522.11323-9-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190304201522.11323-1-miquel.raynal@bootlin.com>

From: Boris Brezillon <bbrezillon@kernel.org>

In order to use some of the nanddev_xxx() helpers, we need to
initialize the nand_device object embedded in nand_chip using
nanddev_init(). This requires implementing nand_ops.

We also drop useless mtd->xxx initialization when they're already taken
case of by nanddev_init().

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 drivers/mtd/nand/raw/Kconfig     |  1 +
 drivers/mtd/nand/raw/nand_base.c | 65 ++++++++++++++++++++++++++++----
 2 files changed, 59 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 1a55d3e3d4c5..8c38f2c116a2 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -14,6 +14,7 @@ menuconfig MTD_NAND
 	tristate "Raw/Parallel NAND Device Support"
 	depends on MTD
 	select MTD_NAND_ECC
+	select MTD_NAND_CORE
 	help
 	  This enables support for accessing all type of raw/parallel
 	  NAND flash devices. For further information see
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 5aba1cf38a4b..fea3f8b96558 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5523,6 +5523,50 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
 	return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
 }
 
+static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
+{
+	struct nand_chip *chip = container_of(nand, struct nand_chip,
+					      base);
+	unsigned int eb = nanddev_pos_to_row(nand, pos);
+	int ret;
+
+	eb >>= nand->rowconv.eraseblock_addr_shift;
+
+	nand_select_target(chip, pos->target);
+	ret = nand_erase_op(chip, eb);
+	nand_deselect_target(chip);
+
+	return ret;
+}
+
+static int rawnand_markbad(struct nand_device *nand,
+			   const struct nand_pos *pos)
+{
+	struct nand_chip *chip = container_of(nand, struct nand_chip,
+					      base);
+
+	return nand_markbad_bbm(chip, nanddev_pos_to_offs(nand, pos));
+}
+
+static bool rawnand_isbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+	struct nand_chip *chip = container_of(nand, struct nand_chip,
+					      base);
+	int ret;
+
+	nand_select_target(chip, pos->target);
+	ret = nand_isbad_bbm(chip, nanddev_pos_to_offs(nand, pos));
+	nand_deselect_target(chip);
+
+	return ret;
+}
+
+static const struct nand_ops rawnand_ops = {
+	.erase = rawnand_erase,
+	.markbad = rawnand_markbad,
+	.isbad = rawnand_isbad,
+};
+
 /**
  * nand_scan_tail - Scan for the NAND device
  * @chip: NAND chip object
@@ -5791,10 +5835,15 @@ static int nand_scan_tail(struct nand_chip *chip)
 		break;
 	}
 
+	ret = nanddev_init(&chip->base, &rawnand_ops, mtd->owner);
+	if (ret)
+		goto err_nand_manuf_cleanup;
+
+	/* Adjust the MTD_CAP_ flags when NAND_ROM is set. */
+	if (chip->options & NAND_ROM)
+		mtd->flags = MTD_CAP_ROM;
+
 	/* Fill in remaining MTD driver data */
-	mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
-	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
-						MTD_CAP_NANDFLASH;
 	mtd->_erase = nand_erase;
 	mtd->_point = NULL;
 	mtd->_unpoint = NULL;
@@ -5811,7 +5860,6 @@ static int nand_scan_tail(struct nand_chip *chip)
 	mtd->_block_isbad = nand_block_isbad;
 	mtd->_block_markbad = nand_block_markbad;
 	mtd->_max_bad_blocks = nand_max_bad_blocks;
-	mtd->writebufsize = mtd->writesize;
 
 	/*
 	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
@@ -5824,13 +5872,13 @@ static int nand_scan_tail(struct nand_chip *chip)
 	/* Initialize the ->data_interface field. */
 	ret = nand_init_data_interface(chip);
 	if (ret)
-		goto err_nand_manuf_cleanup;
+		goto err_nanddev_cleanup;
 
 	/* Enter fastest possible mode on all dies. */
 	for (i = 0; i < chip->numchips; i++) {
 		ret = nand_setup_data_interface(chip, i);
 		if (ret)
-			goto err_nand_manuf_cleanup;
+			goto err_nanddev_cleanup;
 	}
 
 	/* Check, if we should skip the bad block table scan */
@@ -5840,11 +5888,14 @@ static int nand_scan_tail(struct nand_chip *chip)
 	/* Build bad block table */
 	ret = nand_create_bbt(chip);
 	if (ret)
-		goto err_nand_manuf_cleanup;
+		goto err_nanddev_cleanup;
 
 	return 0;
 
 
+err_nanddev_cleanup:
+	nanddev_cleanup(&chip->base);
+
 err_nand_manuf_cleanup:
 	nand_manufacturer_cleanup(chip);
 
-- 
2.19.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2019-03-04 20:18 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-04 20:15 [PATCH v2 00/15] mtd: rawnand: 5th batch of cleanups Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 01/15] mtd: nand: Add max_bad_eraseblocks_per_lun info to memorg Miquel Raynal
2019-06-04  8:01   ` Emil Lenngren
2019-06-06  8:27     ` Schrempf Frieder
2019-06-06  8:39       ` Boris Brezillon
2019-06-06  8:52         ` Schrempf Frieder
2019-06-06  8:57           ` Schrempf Frieder
2019-06-06  9:05             ` Boris Brezillon
2019-06-06 13:06       ` Emil Lenngren
2019-03-04 20:15 ` [PATCH v2 02/15] mtd: nand: Add a helper returning the number of eraseblocks per target Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 03/15] mtd: nand: Add a helper to retrieve the number of pages " Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 04/15] mtd: spinand: Implement mtd->_max_bad_blocks Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 05/15] mtd: rawnand: Use nand_to_mtd() in nand_{set, get}_flash_node() Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 06/15] mtd: rawnand: Prepare things to reuse the generic NAND layer Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 07/15] mtd: rawnand: Fill memorg during detection Miquel Raynal
2019-03-21  9:03   ` Schrempf Frieder
2019-03-04 20:15 ` Miquel Raynal [this message]
2019-03-04 20:15 ` [PATCH v2 09/15] mtd: rawnand: Provide a helper to get chip->data_buf Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 10/15] mtd: rawnand: Move all page cache related fields to a sub-struct Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 11/15] mtd: rawnand: Use nanddev_mtd_max_bad_blocks() Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 12/15] mtd: rawnand: Get rid of chip->bits_per_cell Miquel Raynal
2019-03-04 20:15 ` [PATCH v2 13/15] mtd: rawnand: Get rid of chip->chipsize Miquel Raynal
2019-03-21  9:03   ` Schrempf Frieder
2019-03-04 20:15 ` [PATCH v2 14/15] mtd: rawnand: Get rid of chip->numchips Miquel Raynal
2019-05-21  6:59   ` Sascha Hauer
2019-05-21  7:33     ` Boris Brezillon
2019-05-21  7:43       ` Boris Brezillon
2019-05-21  7:51       ` Boris Brezillon
2019-05-21  7:58         ` Sascha Hauer
2019-05-21  8:01           ` Boris Brezillon
2019-05-21  7:56       ` Sascha Hauer
2019-03-04 20:15 ` [PATCH v2 15/15] mtd: rawnand: Get rid of chip->ecc_{strength, step}_ds Miquel Raynal
2019-04-01 15:28 ` [PATCH v2 00/15] mtd: rawnand: 5th batch of cleanups Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190304201522.11323-9-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=bbrezillon@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=juliensu@mxic.com.tw \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=masonccyang@mxic.com.tw \
    --cc=richard@nod.at \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vigneshr@ti.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox