* [PATCH v3 1/3] mtd: spinand: Define macros for page-read ops with three-byte addresses
2019-05-20 19:44 [PATCH v3 0/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
@ 2019-05-20 19:44 ` Jeff Kletsky
2019-05-20 19:44 ` [PATCH v3 2/3] mtd: spinand: Add support for two-byte device IDs Jeff Kletsky
2019-05-20 19:44 ` [PATCH v3 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2 siblings, 0 replies; 5+ messages in thread
From: Jeff Kletsky @ 2019-05-20 19:44 UTC (permalink / raw)
To: Miquel Raynal, Boris Brezillon, Richard Weinberger,
David Woodhouse, Brian Norris, Marek Vasut
Cc: linux-mtd, Jeff Kletsky, linux-kernel, Frieder Schrempf
From: Jeff Kletsky <git-commits@allycomm.com>
The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes three-byte addresses
for its page-read ops.
http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
include/linux/mtd/spinand.h | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index b92e2aa955b6..05fe98eebe27 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -68,30 +68,60 @@
SPI_MEM_OP_DUMMY(ndummy, 1), \
SPI_MEM_OP_DATA_IN(len, buf, 1))
+#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \
+ SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1), \
+ SPI_MEM_OP_ADDR(3, addr, 1), \
+ SPI_MEM_OP_DUMMY(ndummy, 1), \
+ SPI_MEM_OP_DATA_IN(len, buf, 1))
+
#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \
SPI_MEM_OP_ADDR(2, addr, 1), \
SPI_MEM_OP_DUMMY(ndummy, 1), \
SPI_MEM_OP_DATA_IN(len, buf, 2))
+#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len) \
+ SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \
+ SPI_MEM_OP_ADDR(3, addr, 1), \
+ SPI_MEM_OP_DUMMY(ndummy, 1), \
+ SPI_MEM_OP_DATA_IN(len, buf, 2))
+
#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \
SPI_MEM_OP_ADDR(2, addr, 1), \
SPI_MEM_OP_DUMMY(ndummy, 1), \
SPI_MEM_OP_DATA_IN(len, buf, 4))
+#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len) \
+ SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \
+ SPI_MEM_OP_ADDR(3, addr, 1), \
+ SPI_MEM_OP_DUMMY(ndummy, 1), \
+ SPI_MEM_OP_DATA_IN(len, buf, 4))
+
#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \
SPI_MEM_OP_ADDR(2, addr, 2), \
SPI_MEM_OP_DUMMY(ndummy, 2), \
SPI_MEM_OP_DATA_IN(len, buf, 2))
+#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \
+ SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \
+ SPI_MEM_OP_ADDR(3, addr, 2), \
+ SPI_MEM_OP_DUMMY(ndummy, 2), \
+ SPI_MEM_OP_DATA_IN(len, buf, 2))
+
#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len) \
SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \
SPI_MEM_OP_ADDR(2, addr, 4), \
SPI_MEM_OP_DUMMY(ndummy, 4), \
SPI_MEM_OP_DATA_IN(len, buf, 4))
+#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \
+ SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \
+ SPI_MEM_OP_ADDR(3, addr, 4), \
+ SPI_MEM_OP_DUMMY(ndummy, 4), \
+ SPI_MEM_OP_DATA_IN(len, buf, 4))
+
#define SPINAND_PROG_EXEC_OP(addr) \
SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \
SPI_MEM_OP_ADDR(3, addr, 1), \
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/3] mtd: spinand: Add support for two-byte device IDs
2019-05-20 19:44 [PATCH v3 0/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2019-05-20 19:44 ` [PATCH v3 1/3] mtd: spinand: Define macros for page-read ops with three-byte addresses Jeff Kletsky
@ 2019-05-20 19:44 ` Jeff Kletsky
2019-05-20 19:44 ` [PATCH v3 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2 siblings, 0 replies; 5+ messages in thread
From: Jeff Kletsky @ 2019-05-20 19:44 UTC (permalink / raw)
To: Miquel Raynal, Boris Brezillon, Richard Weinberger,
David Woodhouse, Brian Norris, Marek Vasut
Cc: linux-mtd, Jeff Kletsky, linux-kernel, Frieder Schrempf
From: Jeff Kletsky <git-commits@allycomm.com>
The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes two-byte device IDs.
http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
drivers/mtd/nand/spi/core.c | 2 +-
include/linux/mtd/spinand.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index fa87ae28cdfe..a13154785dad 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -853,7 +853,7 @@ spinand_select_op_variant(struct spinand_device *spinand,
*/
int spinand_match_and_init(struct spinand_device *spinand,
const struct spinand_info *table,
- unsigned int table_size, u8 devid)
+ unsigned int table_size, u16 devid)
{
struct nand_device *nand = spinand_to_nand(spinand);
unsigned int i;
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 05fe98eebe27..8901ba272538 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -290,7 +290,7 @@ struct spinand_ecc_info {
*/
struct spinand_info {
const char *model;
- u8 devid;
+ u16 devid;
u32 flags;
struct nand_memory_organization memorg;
struct nand_ecc_req eccreq;
@@ -445,7 +445,7 @@ static inline void spinand_set_of_node(struct spinand_device *spinand,
int spinand_match_and_init(struct spinand_device *dev,
const struct spinand_info *table,
- unsigned int table_size, u8 devid);
+ unsigned int table_size, u16 devid);
int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
int spinand_select_target(struct spinand_device *spinand, unsigned int target);
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v3 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
2019-05-20 19:44 [PATCH v3 0/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2019-05-20 19:44 ` [PATCH v3 1/3] mtd: spinand: Define macros for page-read ops with three-byte addresses Jeff Kletsky
2019-05-20 19:44 ` [PATCH v3 2/3] mtd: spinand: Add support for two-byte device IDs Jeff Kletsky
@ 2019-05-20 19:44 ` Jeff Kletsky
2019-05-22 22:36 ` Jeff Kletsky
2 siblings, 1 reply; 5+ messages in thread
From: Jeff Kletsky @ 2019-05-20 19:44 UTC (permalink / raw)
To: Miquel Raynal, Boris Brezillon, Richard Weinberger,
David Woodhouse, Brian Norris, Marek Vasut
Cc: linux-mtd, Jeff Kletsky, linux-kernel, Frieder Schrempf
From: Jeff Kletsky <git-commits@allycomm.com>
The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
and, while it has the same logical layout as the E-series devices,
it differs in the SPI interfacing in significant ways.
This support is contingent on previous commits to:
* Add support for two-byte device IDs
* Define macros for page-read ops with three-byte addresses
http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
1 file changed, 64 insertions(+), 15 deletions(-)
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index 0b49d8264bef..d6497ac4c5d8 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -9,11 +9,17 @@
#include <linux/mtd/spinand.h>
#define SPINAND_MFR_GIGADEVICE 0xC8
+
#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
#define GD5FXGQ4UEXXG_REG_STATUS2 0xf0
+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK (7 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS (0 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4)
+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4)
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+static SPINAND_OP_VARIANTS(read_cache_variants_f,
+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
+
static SPINAND_OP_VARIANTS(write_cache_variants,
SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
SPINAND_PROG_LOAD(true, 0, NULL, 0));
@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+ .ecc = gd5fxgq4xa_ooblayout_ecc,
+ .free = gd5fxgq4xa_ooblayout_free,
+};
+
static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
return 0;
}
-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
if (section)
@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
+ .ecc = gd5fxgq4_variant2_ooblayout_ecc,
+ .free = gd5fxgq4_variant2_ooblayout_free,
+};
+
static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
u8 status)
{
@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
- .ecc = gd5fxgq4xa_ooblayout_ecc,
- .free = gd5fxgq4xa_ooblayout_free,
-};
+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
+ case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
+ return 0;
-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
- .ecc = gd5fxgq4uexxg_ooblayout_ecc,
- .free = gd5fxgq4uexxg_ooblayout_free,
-};
+ case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
+ return 3;
+
+ case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
+ return -EBADMSG;
+
+ default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
+ return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
+ }
+
+ return -EINVAL;
+}
static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_INFO("GD5F1GQ4xA", 0xF1,
@@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
+ SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+ gd5fxgq4ufxxg_ecc_get_status)),
};
static int gigadevice_spinand_detect(struct spinand_device *spinand)
{
u8 *id = spinand->id.data;
+ u16 did;
int ret;
/*
- * For GD NANDs, There is an address byte needed to shift in before IDs
- * are read out, so the first byte in raw_id is dummy.
+ * Earlier GDF5-series devices (A,E) return [0][MID][DID]
+ * Later (F) devices return [MID][DID1][DID2]
*/
- if (id[1] != SPINAND_MFR_GIGADEVICE)
+
+ if (id[0] == SPINAND_MFR_GIGADEVICE)
+ did = (id[1] << 8) + id[2];
+ else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
+ did = id[2];
+ else
return 0;
ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
ARRAY_SIZE(gigadevice_spinand_table),
- id[2]);
+ did);
if (ret)
return ret;
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 5+ messages in thread