public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>
Subject: Re: [GIT PULL] mtd: nand: Changes for 5.7
Date: Mon, 30 Mar 2020 10:16:34 +0200	[thread overview]
Message-ID: <20200330101634.6c1b3b7e@xps13> (raw)
In-Reply-To: <20200327212238.6f0b5e15@xps13>


Miquel Raynal <miquel.raynal@bootlin.com> wrote on Fri, 27 Mar 2020
21:22:38 +0100:

> Hello,
> 
> This is the NAND PR for 5.7.

Pulled into mtd/next.

> 
> Thanks,
> Miquèl
> 
> The following changes since commit 98d54f81e36ba3bf92172791eba5ca5bd813989b:
> 
>   Linux 5.6-rc4 (2020-03-01 16:38:46 -0600)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.7
> 
> for you to fetch changes up to fca88925d76978b7f20de42d8ead34fb91500003:
> 
>   mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) (2020-03-25 22:13:04 +0100)
> 
> ----------------------------------------------------------------
> Raw NAND core changes:
> * Add support for manufacturer specific suspend/resume operation
> * Add support for manufacturer specific lock/unlock operation
> * Replace zero-length array with flexible-array member
> * Fix a typo ("manufecturer")
> * Ensure nand_soft_waitrdy wait period is enough
> 
> Raw NAND controller driver changes:
> * Brcmnand:
> Add support for flash-edu for dma transfers (+ bindings)
> * Cadence:
> Reinit completion before executing a new command
> Change bad block marker size
> Fix the calculation of the avaialble OOB size
> Get meta data size from registers
> * Qualcom:
> Use dma_request_chan() instead dma_request_slave_channel()
> Release resources on failure within qcom_nandc_alloc()
> * Allwinner:
> Use dma_request_chan() instead dma_request_slave_channel()
> * Marvell:
> Use dma_request_chan() instead dma_request_slave_channel()
> Release DMA channel on error
> * Freescale:
> Use dma_request_chan() instead dma_request_slave_channel()
> * Macronix:
> Add support for Macronix NAND randomizer (+ bindings)
> * Ams-delta:
> Rename structures and functions to gpio_nand*
> Make the driver custom I/O ready
> Drop useless local variable
> Support custom driver initialisation
> Add module device tables
> Handle more GPIO pins as optional
> Make read pulses optional
> Don't hardcode read/write pulse widths
> Push inversion handling to gpiolib
> Enable OF partition info support
> Drop board specific partition info
> Use struct gpio_nand_platdata
> Write protect device during probe
> * Ingenic:
> Use devm_platform_ioremap_resource()
> Add dependency on MIPS || COMPILE_TEST
> * Denali:
> Deassert write protect pin
> * ST:
> Use dma_request_chan() instead dma_request_slave_channel()
> 
> Raw NAND chip driver changes:
> * Toshiba:
> Support reading the number of bitflips for BENAND (Built-in ECC NAND)
> * Macronix:
> Add support for deep power down mode
> Add support for block protection
> 
> SPI-NAND core changes:
> * Do not erase the block before writing a bad block marker
> * Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
> * Stop using spinand->oobbuf for buffering bad block markers
> * Rework detect procedure for different READ_ID operation
> 
> SPI-NAND driver changes:
> * Toshiba:
> Support for new Kioxia Serial NAND
> Rename function name to change suffix and prefix (8Gbit)
> Add comment about Kioxia ID
> * Micron:
> Add new Micron SPI NAND devices with multiple dies
> Add M70A series Micron SPI NAND devices
> identify SPI NAND device with Continuous Read mode
> Add new Micron SPI NAND devices
> Describe the SPI NAND device MT29F2G01ABAGD
> Generalize the OOB layout structure and function names
> 
> ----------------------------------------------------------------
> Christophe Kerello (1):
>       mtd: rawnand: free the nand_device object
> 
> Chuanhong Guo (1):
>       mtd: spinand: rework detect procedure for different READ_ID operation
> 
> Frieder Schrempf (3):
>       mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers
>       mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB
>       mtd: spinand: Do not erase the block before writing a bad block marker
> 
> Gustavo A. R. Silva (1):
>       mtd: rawnand: Replace zero-length array with flexible-array member
> 
> Janusz Krzysztofik (14):
>       mtd: rawnand: ams-delta: Write protect device during probe
>       mtd: rawnand: ams-delta: Use struct gpio_nand_platdata
>       ARM: OMAP1: ams-delta: Provide board specific partition info
>       mtd: rawnand: ams-delta: Drop board specific partition info
>       mtd: rawnand: ams-delta: Enable OF partition info support
>       mtd: rawnand: ams-delta: Push inversion handling to gpiolib
>       mtd: rawnand: ams-delta: Don't hardcode read/write pulse widths
>       mtd: rawnand: ams-delta: Make read pulses optional
>       mtd: rawnand: ams-delta: Handle more GPIO pins as optional
>       mtd: rawnand: ams-delta: Add module device tables
>       mtd: rawnand: ams-delta: Support custom driver initialisation
>       mtd: rawnand: ams-delta: Drop useless local variable
>       mtd: rawnand: ams-delta: Make the driver custom I/O ready
>       mtd: rawnand: ams-delta: Rename structures and functions to gpio_nand*
> 
> Jonathan Neuschäfer (1):
>       mtd: rawnand: Fix a typo ("manufecturer")
> 
> Kamal Dasu (3):
>       dt: bindings: brcmnand: Add support for flash-edu
>       arch: mips: brcm: Add 7425 flash-edu support
>       mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers
> 
> Martin Devera (1):
>       mtd: rawnand: Ensure nand_soft_waitrdy wait period is enough
> 
> Masahiro Yamada (1):
>       mtd: rawnand: denali: deassert write protect pin
> 
> Mason Yang (6):
>       mtd: rawnand: Add support for Macronix NAND randomizer
>       dt-bindings: mtd: Document Macronix NAND device bindings
>       mtd: rawnand: Add support for manufacturer specific lock/unlock operation
>       mtd: rawnand: Macronix: Add support for block protection
>       mtd: rawnand: Add support for manufacturer specific suspend/resume operation
>       mtd: rawnand: macronix: Add support for deep power down mode
> 
> Paul Cercueil (2):
>       mtd: rawnand: ingenic: Use devm_platform_ioremap_resource()
>       mtd: rawnand: ingenic: Add dependency on MIPS || COMPILE_TEST
> 
> Peter Ujfalusi (7):
>       mtd: rawnand: gpmi: Use dma_request_chan() instead dma_request_slave_channel()
>       mtd: rawnand: marvell: Release DMA channel on error
>       mtd: rawnand: marvell: Use dma_request_chan() instead dma_request_slave_channel()
>       mtd: rawnand: sunxi: Use dma_request_chan() instead dma_request_slave_channel()
>       mtd: rawnand: qcom: Release resources on failure within qcom_nandc_alloc()
>       mtd: rawnand: qcom: Use dma_request_chan() instead dma_request_slave_channel()
>       mtd: rawnand: stm32_fmc2: Use dma_request_chan() instead dma_request_slave_channel()
> 
> Piotr Sroka (4):
>       mtd: rawnand: cadence: get meta data size from registers
>       mtd: rawnand: cadence: fix the calculation of the avaialble OOB size
>       mtd: rawnand: cadence: change bad block marker size
>       mtd: rawnand: cadence: reinit completion before executing a new command
> 
> Shivamurthy Shastri (6):
>       mtd: spinand: micron: Generalize the OOB layout structure and function names
>       mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
>       mtd: spinand: micron: Add new Micron SPI NAND devices
>       mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
>       mtd: spinand: micron: Add M70A series Micron SPI NAND devices
>       mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies
> 
> Yoshio Furuyama (4):
>       mtd: spinand: toshiba: Add comment about Kioxia ID
>       mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)
>       mtd: spinand: toshiba: Support for new Kioxia Serial NAND
>       mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND)
> 
>  Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt |  10 ++--
>  Documentation/devicetree/bindings/mtd/nand-macronix.txt |  27 +++++++++++
>  arch/arm/mach-omap1/board-ams-delta.c                   |  47 ++++++++++++++++--
>  arch/mips/boot/dts/brcm/bcm7425.dtsi                    |   4 +-
>  drivers/mtd/nand/raw/ams-delta.c                        | 243 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------
>  drivers/mtd/nand/raw/brcmnand/brcmnand.c                | 293 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
>  drivers/mtd/nand/raw/cadence-nand-controller.c          |  34 +++++++------
>  drivers/mtd/nand/raw/denali.c                           |   1 +
>  drivers/mtd/nand/raw/denali.h                           |   2 +-
>  drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c              |  21 ++++----
>  drivers/mtd/nand/raw/ingenic/Kconfig                    |   1 +
>  drivers/mtd/nand/raw/ingenic/ingenic_ecc.c              |   4 +-
>  drivers/mtd/nand/raw/internals.h                        |   1 +
>  drivers/mtd/nand/raw/marvell_nand.c                     |  40 +++++++++++-----
>  drivers/mtd/nand/raw/meson_nand.c                       |   2 +-
>  drivers/mtd/nand/raw/mtk_nand.c                         |   2 +-
>  drivers/mtd/nand/raw/nand_base.c                        |  62 +++++++++++++++++++++---
>  drivers/mtd/nand/raw/nand_hynix.c                       |   2 +-
>  drivers/mtd/nand/raw/nand_macronix.c                    | 227 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/mtd/nand/raw/nand_toshiba.c                     |  58 +++++++++++++++++++++-
>  drivers/mtd/nand/raw/qcom_nandc.c                       | 105 ++++++++++++++++++++++++----------------
>  drivers/mtd/nand/raw/stm32_fmc2_nand.c                  |  44 ++++++++++++++---
>  drivers/mtd/nand/raw/sunxi_nand.c                       |  17 ++++---
>  drivers/mtd/nand/spi/core.c                             | 104 +++++++++++++++++++++++++++-------------
>  drivers/mtd/nand/spi/gigadevice.c                       |  45 +++++-------------
>  drivers/mtd/nand/spi/macronix.c                         |  30 +++---------
>  drivers/mtd/nand/spi/micron.c                           | 172 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
>  drivers/mtd/nand/spi/paragon.c                          |  28 +++--------
>  drivers/mtd/nand/spi/toshiba.c                          | 208 +++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------
>  drivers/mtd/nand/spi/winbond.c                          |  34 +++----------
>  include/linux/mtd/rawnand.h                             |  11 ++++-
>  include/linux/mtd/spinand.h                             |  67 +++++++++++++++++---------
>  32 files changed, 1482 insertions(+), 464 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/nand-macronix.txt

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

      reply	other threads:[~2020-03-30  8:16 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27 20:22 [GIT PULL] mtd: nand: Changes for 5.7 Miquel Raynal
2020-03-30  8:16 ` Miquel Raynal [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200330101634.6c1b3b7e@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox