linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@collabora.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Rickard Andersson <rickaran@axis.com>,
	Richard Weinberger <richard@nod.at>,
	linux-mtd@lists.infradead.org,
	Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH v4 17/19] mtd: rawnand: Introduce nand_choose_best_vendor_sdr_iface()
Date: Mon, 25 May 2020 21:45:30 +0200	[thread overview]
Message-ID: <20200525214530.16cd59c1@collabora.com> (raw)
In-Reply-To: <20200525174239.11349-18-miquel.raynal@bootlin.com>

On Mon, 25 May 2020 19:42:37 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> This helper is here to simplify the life of NAND manufacturer drivers.
> 
> Manufacturers will be allowed to propose their own set of timings and,
> if they want, use this helper to:
> 1/ verify it is supported by the controller,
> 2/ fallback on a supported default ONFI mode, slower but still faster
>    than the default mode 0.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  drivers/mtd/nand/raw/internals.h |  2 ++
>  drivers/mtd/nand/raw/nand_base.c | 27 +++++++++++++++++++++++++++
>  2 files changed, 29 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h
> index ac103d8767be..9af6979257e2 100644
> --- a/drivers/mtd/nand/raw/internals.h
> +++ b/drivers/mtd/nand/raw/internals.h
> @@ -89,6 +89,8 @@ int onfi_fill_data_interface(struct nand_chip *chip,
>  			     enum nand_data_interface_type type,
>  			     int timing_mode);
>  unsigned int onfi_find_equivalent_sdr_mode(const struct nand_sdr_timings *vendor_timings);
> +int nand_choose_best_vendor_sdr_iface(struct nand_chip * chip,
> +				      struct nand_data_interface *best_iface);
>  int nand_get_features(struct nand_chip *chip, int addr, u8 *subfeature_param);
>  int nand_set_features(struct nand_chip *chip, int addr, u8 *subfeature_param);
>  int nand_read_page_raw_notsupp(struct nand_chip *chip, u8 *buf,
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index 15e10f045c9f..d9fe7795f183 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -1078,6 +1078,33 @@ static int nand_choose_data_interface(struct nand_chip *chip)
>  	return nand_choose_best_sdr_iface(chip, &chip->data_interface);
>  }
>  
> +/**
> + * nand_choose_best_vendor_sdr_iface - given a set of timings, find the closest
> + *                                     mode/timings set for this interface
> + *                                     supported by both the NAND controller and
> + *                                     the NAND chip
> + * @chip: the NAND chip
> + * @best_iface: the best data interface (can eventually be updated)
> + */
> +int nand_choose_best_vendor_sdr_iface(struct nand_chip * chip,
> +				      struct nand_data_interface *best_iface)
> +{
> +	int ret;
> +
> +	/* Pick the closest mode */
> +	best_iface->timings.mode = onfi_find_equivalent_sdr_mode(&best_iface->timings.sdr);
> +
> +	/* Find the closest supported data interface */
> +	ret = nand_choose_best_sdr_iface(chip, best_iface);
> +	if (ret)
> +		return ret;
> +
> +	chip->data_interface = *best_iface;
> +
> +	return 0;
> +}

Can't we just merge nand_choose_best_vendor_sdr_iface() and
nand_choose_best_sdr_iface()?

int nand_choose_best_sdr_timings(struct nand_chip * chip,
				 struct nand_data_interface *iface,
				 const struct nand_sdr_timing *spec_timings)
{
	iface->type = SDR;

	if (spec_timings) {
		iface->timings.sdr = spec_timings;
		iface->timings.mode = onfi_find_closest_sdr_mode(spec_timings);
	} else {
		unsigned int best_mode;

		if (chip->parameters.onfi)
			best_mode = fls(chip->parameters.onfi->async_timing_mode) - 1;
		else
			best_mode = chip->default_timing_mode;

		onfi_fill_data_interface(chip, iface,
					  NAND_SDR_IFACE, best_mode);
	}

	/* Verify the controller supports the requested interface */
	ret = ops->setup_data_interface(chip, NAND_DATA_IFACE_CHECK_ONLY,
					iface);
	if (!ret)
		return ret;

	/* Fallback to slower modes */
	for (mode = best_iface->timings.mode - 1; mode >= 0; mode--) {
		ret = onfi_fill_data_interface(chip, iface,
					       NAND_SDR_IFACE, mode);
		if (ret)
			continue;

		ret = ops->setup_data_interface(chip,
						NAND_DATA_IFACE_CHECK_ONLY,
						iface);
		if (!ret)
			break;
	}

	return 0;
}

> +EXPORT_SYMBOL_GPL(nand_choose_best_vendor_sdr_iface);
> +
>  /**
>   * nand_fill_column_cycles - fill the column cycles of an address
>   * @chip: The NAND chip


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-05-25 19:45 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-25 17:42 [PATCH v4 00/19] Allow vendor drivers to propose their own timings Miquel Raynal
2020-05-25 17:42 ` [PATCH v4 01/19] mtd: rawnand: Use unsigned types for nand_chip unsigned values Miquel Raynal
2020-05-25 18:33   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 02/19] mtd: rawnand: Only use u8 instead of uint8_t in nand_chip structure Miquel Raynal
2020-05-25 18:36   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 03/19] mtd: rawnand: Create a nand_chip operations structure Miquel Raynal
2020-05-25 18:37   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 04/19] mtd: rawnand: Rename the manufacturer structure Miquel Raynal
2020-05-25 18:38   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 05/19] mtd: rawnand: Declare the nand_manufacturer structure out of nand_chip Miquel Raynal
2020-05-25 18:40   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 06/19] mtd: rawnand: Reorganize the nand_chip structure Miquel Raynal
2020-05-25 18:55   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 07/19] mtd: rawnand: Compare the actual timing values Miquel Raynal
2020-05-25 19:01   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 08/19] mtd: rawnand: Rename onfi_timing_mode_default Miquel Raynal
2020-05-25 19:07   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 09/19] mtd: rawnand: Use the data interface mode entry when relevant Miquel Raynal
2020-05-25 19:09   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 10/19] mtd: rawnand: Rename nand_has_setup_data_interface() Miquel Raynal
2020-05-25 19:10   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 11/19] mtd: rawnand: Fix nand_setup_data_interface() description Miquel Raynal
2020-05-25 19:13   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 12/19] mtd: rawnand: Rename nand_init_data_interface() Miquel Raynal
2020-05-25 19:17   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 13/19] mtd: rawnand: timings: Update onfi_fill_data_interface() kernel doc Miquel Raynal
2020-05-25 19:18   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 14/19] mtd: rawnand: timings: Provide onfi_fill_data_interface() with a data interface Miquel Raynal
2020-05-25 19:26   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 15/19] mtd: rawnand: timings: Add a helper to find the closest ONFI mode Miquel Raynal
2020-05-25 19:30   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 16/19] mtd: rawnand: Introduce nand_choose_best_sdr_iface() Miquel Raynal
2020-05-25 19:47   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 17/19] mtd: rawnand: Introduce nand_choose_best_vendor_sdr_iface() Miquel Raynal
2020-05-25 19:45   ` Boris Brezillon [this message]
2020-05-26  9:35     ` SV: " Rickard X Andersson
2020-05-26  9:46       ` Miquel Raynal
2020-05-26 10:10         ` SV: " Rickard X Andersson
2020-05-26 10:43           ` Miquel Raynal
2020-05-26 11:42             ` SV: " Rickard X Andersson
2020-05-25 17:42 ` [PATCH v4 18/19] mtd: rawnand: Add the ->choose_data_interface() hook Miquel Raynal
2020-05-25 19:51   ` Boris Brezillon
2020-05-25 17:42 ` [PATCH v4 19/19] mtd: rawnand: Add timings for Kioxia TH58NVG2S3HBAI4 Miquel Raynal
2020-05-25 19:53   ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200525214530.16cd59c1@collabora.com \
    --to=boris.brezillon@collabora.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=rickaran@axis.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).