From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: richard@nod.at, linux-mtd@lists.infradead.org, vigneshr@ti.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mtd: convert sysfs sprintf/snprintf family to sysfs_emit
Date: Thu, 4 Feb 2021 09:12:15 +0100 [thread overview]
Message-ID: <20210204091215.38ca0f99@xps13> (raw)
In-Reply-To: <1612410921-80984-1-git-send-email-jiapeng.chong@linux.alibaba.com>
Hi Jiapeng,
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> wrote on Thu, 4 Feb
2021 11:55:21 +0800:
> Fix the following coccicheck warning:
>
> ./drivers/mtd/mtdcore.c: WARNING: use scnprintf or sprintf.
That's not what you do in the below change :)
>
> Reported-by: Abaci Robot<abaci@linux.alibaba.com>
> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
> ---
> drivers/mtd/mtdcore.c | 35 +++++++++++++++++------------------
> 1 file changed, 17 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
> index 2d6423d..c37056e 100644
> --- a/drivers/mtd/mtdcore.c
> +++ b/drivers/mtd/mtdcore.c
> @@ -131,7 +131,7 @@ static ssize_t mtd_type_show(struct device *dev,
> type = "unknown";
> }
>
> - return snprintf(buf, PAGE_SIZE, "%s\n", type);
> + return sysfs_emit(buf, "%s\n", type);
> }
> static DEVICE_ATTR(type, S_IRUGO, mtd_type_show, NULL);
>
> @@ -140,7 +140,7 @@ static ssize_t mtd_flags_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "0x%lx\n", (unsigned long)mtd->flags);
> + return sysfs_emit(buf, "0x%lx\n", (unsigned long)mtd->flags);
> }
> static DEVICE_ATTR(flags, S_IRUGO, mtd_flags_show, NULL);
>
> @@ -149,8 +149,7 @@ static ssize_t mtd_size_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%llu\n",
> - (unsigned long long)mtd->size);
> + return sysfs_emit(buf, "%llu\n", (unsigned long long)mtd->size);
> }
> static DEVICE_ATTR(size, S_IRUGO, mtd_size_show, NULL);
>
> @@ -159,7 +158,7 @@ static ssize_t mtd_erasesize_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->erasesize);
> + return sysfs_emit(buf, "%lu\n", (unsigned long)mtd->erasesize);
> }
> static DEVICE_ATTR(erasesize, S_IRUGO, mtd_erasesize_show, NULL);
>
> @@ -168,7 +167,7 @@ static ssize_t mtd_writesize_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->writesize);
> + return sysfs_emit(buf, "%lu\n", (unsigned long)mtd->writesize);
> }
> static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
>
> @@ -178,7 +177,7 @@ static ssize_t mtd_subpagesize_show(struct device *dev,
> struct mtd_info *mtd = dev_get_drvdata(dev);
> unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
> + return sysfs_emit(buf, "%u\n", subpagesize);
> }
> static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
>
> @@ -187,7 +186,7 @@ static ssize_t mtd_oobsize_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%lu\n", (unsigned long)mtd->oobsize);
> + return sysfs_emit(buf, "%lu\n", (unsigned long)mtd->oobsize);
> }
> static DEVICE_ATTR(oobsize, S_IRUGO, mtd_oobsize_show, NULL);
>
> @@ -196,7 +195,7 @@ static ssize_t mtd_oobavail_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", mtd->oobavail);
> + return sysfs_emit(buf, "%u\n", mtd->oobavail);
> }
> static DEVICE_ATTR(oobavail, S_IRUGO, mtd_oobavail_show, NULL);
>
> @@ -205,7 +204,7 @@ static ssize_t mtd_numeraseregions_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", mtd->numeraseregions);
> + return sysfs_emit(buf, "%u\n", mtd->numeraseregions);
> }
> static DEVICE_ATTR(numeraseregions, S_IRUGO, mtd_numeraseregions_show,
> NULL);
> @@ -215,7 +214,7 @@ static ssize_t mtd_name_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%s\n", mtd->name);
> + return sysfs_emit(buf, "%s\n", mtd->name);
> }
> static DEVICE_ATTR(name, S_IRUGO, mtd_name_show, NULL);
>
> @@ -224,7 +223,7 @@ static ssize_t mtd_ecc_strength_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_strength);
> + return sysfs_emit(buf, "%u\n", mtd->ecc_strength);
> }
> static DEVICE_ATTR(ecc_strength, S_IRUGO, mtd_ecc_strength_show, NULL);
>
> @@ -234,7 +233,7 @@ static ssize_t mtd_bitflip_threshold_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", mtd->bitflip_threshold);
> + return sysfs_emit(buf, "%u\n", mtd->bitflip_threshold);
> }
>
> static ssize_t mtd_bitflip_threshold_store(struct device *dev,
> @@ -261,7 +260,7 @@ static ssize_t mtd_ecc_step_size_show(struct device *dev,
> {
> struct mtd_info *mtd = dev_get_drvdata(dev);
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", mtd->ecc_step_size);
> + return sysfs_emit(buf, "%u\n", mtd->ecc_step_size);
>
> }
> static DEVICE_ATTR(ecc_step_size, S_IRUGO, mtd_ecc_step_size_show, NULL);
> @@ -272,7 +271,7 @@ static ssize_t mtd_ecc_stats_corrected_show(struct device *dev,
> struct mtd_info *mtd = dev_get_drvdata(dev);
> struct mtd_ecc_stats *ecc_stats = &mtd->ecc_stats;
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", ecc_stats->corrected);
> + return sysfs_emit(buf, "%u\n", ecc_stats->corrected);
> }
> static DEVICE_ATTR(corrected_bits, S_IRUGO,
> mtd_ecc_stats_corrected_show, NULL);
> @@ -283,7 +282,7 @@ static ssize_t mtd_ecc_stats_errors_show(struct device *dev,
> struct mtd_info *mtd = dev_get_drvdata(dev);
> struct mtd_ecc_stats *ecc_stats = &mtd->ecc_stats;
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", ecc_stats->failed);
> + return sysfs_emit(buf, "%u\n", ecc_stats->failed);
> }
> static DEVICE_ATTR(ecc_failures, S_IRUGO, mtd_ecc_stats_errors_show, NULL);
>
> @@ -293,7 +292,7 @@ static ssize_t mtd_badblocks_show(struct device *dev,
> struct mtd_info *mtd = dev_get_drvdata(dev);
> struct mtd_ecc_stats *ecc_stats = &mtd->ecc_stats;
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", ecc_stats->badblocks);
> + return sysfs_emit(buf, "%u\n", ecc_stats->badblocks);
> }
> static DEVICE_ATTR(bad_blocks, S_IRUGO, mtd_badblocks_show, NULL);
>
> @@ -303,7 +302,7 @@ static ssize_t mtd_bbtblocks_show(struct device *dev,
> struct mtd_info *mtd = dev_get_drvdata(dev);
> struct mtd_ecc_stats *ecc_stats = &mtd->ecc_stats;
>
> - return snprintf(buf, PAGE_SIZE, "%u\n", ecc_stats->bbtblocks);
> + return sysfs_emit(buf, "%u\n", ecc_stats->bbtblocks);
> }
> static DEVICE_ATTR(bbt_blocks, S_IRUGO, mtd_bbtblocks_show, NULL);
>
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2021-02-04 8:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-04 3:55 [PATCH] mtd: convert sysfs sprintf/snprintf family to sysfs_emit Jiapeng Chong
2021-02-04 8:12 ` Miquel Raynal [this message]
2021-02-04 8:16 ` Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210204091215.38ca0f99@xps13 \
--to=miquel.raynal@bootlin.com \
--cc=jiapeng.chong@linux.alibaba.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox