From: "Rafał Miłecki" <zajec5@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
"Vivek Unune" <npcomplete13@gmail.com>,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH 1/2] dt-bindings: mtd: add binding for Linksys Northstar partitions
Date: Fri, 12 Mar 2021 14:49:18 +0100 [thread overview]
Message-ID: <20210312134919.7767-1-zajec5@gmail.com> (raw)
From: Rafał Miłecki <rafal@milecki.pl>
Linksys on Broadcom Northstar devices uses fixed flash layout with
multiple firmware partitions.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../mtd/partitions/linksys,ns-partitions.yaml | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
diff --git a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
new file mode 100644
index 000000000000..99249cdfbfb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linksys Northstar partitioning
+
+description: |
+ Linksys devices based on Broadcom Northstar architecture often use two
+ firmware partitions. One is used for regular booting, the other is treated as
+ fallback.
+
+ This binding allows defining all fixed partitions and marking those containing
+ firmware. System can use that information e.g. for booting or flashing
+ purposes.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ compatible:
+ const: linksys,ns-partitions
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+patternProperties:
+ "^partition@[0-9a-f]+$":
+ $ref: "partition.yaml#"
+ properties:
+ compatible:
+ items:
+ - const: linksys,ns-firmware
+ - const: brcm,trx
+ unevaluatedProperties: false
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ partitions {
+ compatible = "linksys,ns-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "nvram";
+ reg = <0x100000 0x100000>;
+ };
+
+ partition@200000 {
+ compatible = "linksys,ns-firmware", "brcm,trx";
+ reg = <0x200000 0xf00000>;
+ };
+
+ partition@1100000 {
+ compatible = "linksys,ns-firmware", "brcm,trx";
+ reg = <0x1100000 0xf00000>;
+ };
+ };
--
2.26.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2021-03-12 13:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 13:49 Rafał Miłecki [this message]
2021-03-12 13:49 ` [PATCH 2/2] mtd: parsers: ofpart: support Linksys Northstar partitions Rafał Miłecki
2021-03-28 17:27 ` Miquel Raynal
2021-03-24 16:10 ` [PATCH 1/2] dt-bindings: mtd: add binding for " Rob Herring
2021-03-28 17:28 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210312134919.7767-1-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=npcomplete13@gmail.com \
--cc=rafal@milecki.pl \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).