public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org, andy.yan@rock-chips.com,
	yifeng.zhao@rock-chips.com, sugar.zhang@rock-chips.com,
	tudor.ambarus@microchip.com, michael@walle.cc, p.yadav@ti.com,
	heiko@sntech.de, robh+dt@kernel.org, vigneshr@ti.com,
	richard@nod.at, miquel.raynal@bootlin.com,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH v2 2/4] spi: rockchip-sfc: Bindings for Rockchip serial flash controller
Date: Fri, 28 May 2021 12:00:18 -0500	[thread overview]
Message-ID: <20210528170020.26219-3-macroalpha82@gmail.com> (raw)
In-Reply-To: <20210528170020.26219-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add binding document for the Rockchip serial flash controller.
New device specific parameter of rockchip,sfc-no-dma included in
documentation.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../spi/rockchip,serialflash-controller.yaml  | 107 ++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml

diff --git a/Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml b/Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml
new file mode 100644
index 000000000000..eb073130e82a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/rockchip,serialflash-controller.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/rockchip,serialflash-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoCs Serial FLASH Controller (SFC)
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,px30-sfc
+      - const: rockchip,rv1108-sfc
+      - items:
+        - const: rockchip,sfc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Module Clock
+      - description: Bus Clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: clk-sfc
+      - const: clk-hsfc
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,sfc-no-dma:
+    - descrption: Boolean value for disabling DMA
+
+patternProperties:
+  "^spi-nor@[0-3]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+      spi-max-frequency:
+        maxItems: 1
+	  - description: Maximum frequency for SPI Flash
+
+      compatible:
+        oneOf:
+          - const: jedec,spi-nor
+
+      spi-rx-bus-width:
+        maxItems: 1
+          - description: RX Bus Width (1x, 2x, or 4x mode)
+
+      spi-tx-bus-width:
+        maxItems: 1
+          - description: TX Bus Width (1x, 2x, or 4x mode)
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+sfc: spi@ff3a0000 {
+	compatible = "rockchip,px30-sfc","rockchip,sfc";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x0 0xff3a0000 0x0 0x4000>;
+	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+	clock-names = "sfc", "hsfc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
+	power-domains = <&power PX30_PD_MMC_NAND>;
+
+	nor_flash: spi-nor@0 {
+		reg = <0>;
+		compatible = "xtx,xt25f128b","jedec,spi-nor";
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+		spi-max-frequency = <108000000>;
+	};
+};
+
+...
-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2021-05-28 17:01 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-28 17:00 [PATCH v2 0/4] Add Rockchip SFC(serial flash controller) support Chris Morgan
2021-05-28 17:00 ` [PATCH v2 1/4] spi: rockchip-sfc: add rockchip serial flash controller driver Chris Morgan
2021-05-28 17:00 ` Chris Morgan [this message]
2021-05-28 18:48   ` [PATCH v2 2/4] spi: rockchip-sfc: Bindings for Rockchip serial flash controller Michael Walle
2021-05-28 20:01     ` Chris Morgan
2021-05-29  8:45   ` Johan Jonker
2021-05-31 17:18     ` Chris Morgan
2021-06-01  8:30       ` Heiko Stübner
2021-05-28 17:00 ` [PATCH v2 3/4] arm64: dts: rockchip: Add SFC to PX30 Chris Morgan
2021-05-28 17:00 ` [PATCH v2 4/4] arm64: dts: rockchip: Enable SFC for Odroid Go Advance Chris Morgan
2021-05-31 18:24   ` Pratyush Yadav
2021-05-28 18:49 ` [PATCH v2 0/4] Add Rockchip SFC(serial flash controller) support Michael Walle
2021-05-28 20:03   ` Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210528170020.26219-3-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=andy.yan@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=macromorgan@hotmail.com \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=sugar.zhang@rock-chips.com \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    --cc=yifeng.zhao@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox