From: Chris Morgan <macroalpha82@gmail.com>
To: linux-spi@vger.kernel.org
Cc: broonie@kernel.org, robh+dt@kernel.org, heiko@sntech.de,
jbx6244@gmail.com, hjc@rock-chips.com,
yifeng.zhao@rock-chips.com, sugar.zhang@rock-chips.com,
linux-rockchip@lists.infradead.org,
linux-mtd@lists.infradead.org, p.yadav@ti.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH v3 3/4] arm64: dts: rockchip: Add SFC to PX30
Date: Tue, 1 Jun 2021 15:10:20 -0500 [thread overview]
Message-ID: <20210601201021.4406-4-macroalpha82@gmail.com> (raw)
In-Reply-To: <20210601201021.4406-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add a devicetree entry for the Rockchip SFC for the PX30 SOC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 38 ++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 09baa8a167ce..1f4feb53e270 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -966,6 +966,18 @@ emmc: mmc@ff390000 {
status = "disabled";
};
+ sfc: spi@ff3a0000 {
+ compatible = "rockchip,px30-sfc","rockchip,rk3036-sfc";
+ reg = <0x0 0xff3a0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+ clock-names = "sfc", "ahb";
+ pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus4>;
+ pinctrl-names = "default";
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
nfc: nand-controller@ff3b0000 {
compatible = "rockchip,px30-nfc";
reg = <0x0 0xff3b0000 0x0 0x4000>;
@@ -1967,6 +1979,32 @@ flash_bus8: flash-bus8 {
};
};
+ serial_flash {
+ sfc_bus4: sfc-bus4 {
+ rockchip,pins =
+ <1 RK_PA0 3 &pcfg_pull_none>,
+ <1 RK_PA1 3 &pcfg_pull_none>,
+ <1 RK_PA2 3 &pcfg_pull_none>,
+ <1 RK_PA3 3 &pcfg_pull_none>;
+ };
+
+ sfc_bus2: sfc-bus2 {
+ rockchip,pins =
+ <1 RK_PA0 3 &pcfg_pull_none>,
+ <1 RK_PA1 3 &pcfg_pull_none>;
+ };
+
+ sfc_cs: sfc-cs {
+ rockchip,pins =
+ <1 RK_PA4 3 &pcfg_pull_none>;
+ };
+
+ sfc_clk: sfc-clk {
+ rockchip,pins =
+ <1 RK_PB1 3 &pcfg_pull_none>;
+ };
+ };
+
lcdc {
lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
rockchip,pins =
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2021-06-01 20:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 20:10 [PATCH v3 0/4] Add Rockchip SFC(serial flash controller) support Chris Morgan
2021-06-01 20:10 ` [PATCH v3 1/4] dt-bindings: rockchip-sfc: Bindings for Rockchip serial flash controller Chris Morgan
2021-06-02 8:13 ` Johan Jonker
2021-06-02 14:49 ` Chris Morgan
2021-06-01 20:10 ` [PATCH v3 2/4] spi: rockchip-sfc: add rockchip serial flash controller driver Chris Morgan
2021-06-02 16:03 ` Mark Brown
2021-06-01 20:10 ` Chris Morgan [this message]
2021-06-01 20:10 ` [PATCH v4 4/4] arm64: dts: rockchip: Enable SFC for Odroid Go Advance Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210601201021.4406-4-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=broonie@kernel.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=jbx6244@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=macromorgan@hotmail.com \
--cc=p.yadav@ti.com \
--cc=robh+dt@kernel.org \
--cc=sugar.zhang@rock-chips.com \
--cc=yifeng.zhao@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox