[PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id

Arnd Bergmann
2021-11-22T22:23:50Z

The DMA resource is never set up anywhere, and passing this as slave_id
has not been the proper procedure in a long time.

As a preparation for removing all slave_id references from the ALSA code,
remove this one.

According to Dmitry Osipenko, this driver has never been used and
the mechanism for configuring DMA would not work as it is implemented,
so this part will get rewritten when the driver gets put into use
again in the future.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
sound/soc/tegra/tegra20_spdif.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
index 9fdc82d58db3..1c3385da6f82 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -284,7 +284,6 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev)
spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
spdif->playback_dma_data.maxburst = 4;
- spdif->playback_dma_data.slave_id = dmareq->start;

pm_runtime_enable(&pdev->dev);