Re: [GIT PULL] mtd: nand: Changes for 5.17

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hello,

miquel.raynal@bootlin.com wrote on Fri, 31 Dec 2021 13:24:13 +0100:

> Hello,
> 
> This is the NAND PR for 5.17. It includes a small branch provided by
> Krzysztof about OMAP GPMC changes.

Pulled into mtd/next.

> 
> Thanks,
> Miquèl
> 
> The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
> 
>   Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.17
> 
> for you to fetch changes up to 2997e4871621bc56d3c19b447355091dafb6e505:
> 
>   Merge tag 'memory-controller-drv-omap-5.17' into nand/next (2021-12-31 12:45:57 +0100)
> 
> ----------------------------------------------------------------
> Raw NAND core:
> * Export nand_read_page_hwecc_oob_first()
> 
> GPMC memory controller for OMAP2 NAND controller:
> * GPMC:
>   - Add support for AM64 SoC and allow build on K3 platforms
>   - Use a compatible match table when checking for NAND controller
>   - Use platform_get_irq() to get the interrupt
> 
> Raw NAND controller drivers:
> * OMAP2 NAND controller:
>   - Document the missing 'rb-gpios' DT property
>   - Drop unused variable
>   - Fix force_8bit flag behaviour for DMA mode
>   - Move to exec_op interface
>   - Use platform_get_irq() to get the interrupt
> * Renesas:
>   - Add new NAND controller driver with its bindings and MAINTAINERS entry
> * Onenand:
>   - Remove redundant variable ooblen
> * MPC5121:
>   - Remove unused variable in ads5121_select_chip()
> * GPMI:
>   - Add ERR007117 protection for nfc_apply_timings
>   - Remove explicit default gpmi clock setting for i.MX6
>   - Use platform_get_irq_byname() to get the interrupt
>   - Remove unneeded variable
> * Ingenic:
>   - JZ4740 needs 'oob_first' read page function
> * Davinci:
>   - Rewrite function description
>   - Avoid duplicated page read
>   - Don't calculate ECC when reading page
> 
> ----------------------------------------------------------------
> Christian Eggers (1):
>       mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings
> 
> Colin Ian King (1):
>       mtd: onenand: remove redundant variable ooblen
> 
> Geert Uytterhoeven (1):
>       mtd: rawnand: mpc5121: Remove unused variable in ads5121_select_chip()
> 
> Lad Prabhakar (3):
>       memory: omap-gpmc: Use platform_get_irq() to get the interrupt
>       mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt
>       mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt
> 
> Minghao Chi (1):
>       mtd: rawnand: gpmi: remove unneeded variable
> 
> Miquel Raynal (4):
>       dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
>       mtd: rawnand: renesas: Add new NAND controller driver
>       MAINTAINERS: Add an entry for Renesas NAND controller
>       Merge tag 'memory-controller-drv-omap-5.17' into nand/next
> 
> Paul Cercueil (5):
>       mtd: rawnand: davinci: Don't calculate ECC when reading page
>       mtd: rawnand: davinci: Avoid duplicated page read
>       mtd: rawnand: davinci: Rewrite function description
>       mtd: rawnand: Export nand_read_page_hwecc_oob_first()
>       mtd: rawnand: ingenic: JZ4740 needs 'oob_first' read page function
> 
> Rob Herring (1):
>       dt-bindings: mtd: ti,gpmc-nand: Add missing 'rb-gpios'
> 
> Roger Quadros (10):
>       dt-bindings: mtd: ti, gpmc-nand: Add compatible for AM64 NAND
>       mtd: rawnand: omap2: Allow build on K3 platforms
>       mtd: rawnand: omap2: move to exec_op interface
>       mtd: rawnand: omap2: Add compatible for AM64 SoC
>       mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode
>       mtd: rawnand: omap2: drop unused variable
>       dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64
>       memory: omap-gpmc: Add support for GPMC on AM64 SoC
>       memory: omap-gpmc: Use a compatible match table when checking for NAND controller
>       mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3
> 
> Stefan Riedmueller (1):
>       mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
> 
>  .../devicetree/bindings/memory-controllers/ti,gpmc.yaml |   23 +-
>  .../devicetree/bindings/mtd/renesas-nandc.yaml          |   61 +
>  Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml |   10 +-
>  MAINTAINERS                                             |    8 +
>  drivers/memory/omap-gpmc.c                              |   50 +-
>  drivers/mtd/nand/onenand/onenand_bbt.c                  |    4 +-
>  drivers/mtd/nand/raw/Kconfig                            |   10 +-
>  drivers/mtd/nand/raw/Makefile                           |    1 +
>  drivers/mtd/nand/raw/davinci_nand.c                     |   73 +-
>  drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c              |   53 +-
>  drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c         |    5 +
>  drivers/mtd/nand/raw/mpc5121_nfc.c                      |    1 -
>  drivers/mtd/nand/raw/nand_base.c                        |   67 +
>  drivers/mtd/nand/raw/omap2.c                            |  507 ++++----
>  drivers/mtd/nand/raw/omap_elm.c                         |   16 +-
>  drivers/mtd/nand/raw/renesas-nand-controller.c          | 1424 ++++++++++++++++++++++
>  include/linux/mtd/rawnand.h                             |    2 +
>  include/linux/platform_data/mtd-nand-omap2.h            |   10 +-
>  18 files changed, 1911 insertions(+), 414 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
>  create mode 100644 drivers/mtd/nand/raw/renesas-nand-controller.c
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/