linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Xin Xiong <xiongx18@fudan.edu.cn>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, yuanxzhang@fudan.edu.cn,
	Xiyu Yang <xiyuyang19@fudan.edu.cn>,
	Xin Tan <tanxin.ctf@gmail.com>
Subject: Re: [PATCH] mtd: rawnand: atmel: fix refcount leaks in atmel_nand_controller_init
Date: Tue, 25 Jan 2022 18:55:56 +0100	[thread overview]
Message-ID: <20220125185556.6afb7eba@xps13> (raw)
In-Reply-To: <20220125123155.36891-1-xiongx18@fudan.edu.cn>

Hi Xin,

xiongx18@fudan.edu.cn wrote on Tue, 25 Jan 2022 20:31:56 +0800:

> The reference counting issue happens in several error handling paths
> on a refcounted object "nc->dmac". In these paths, the function simply
> returns the error code, forgetting to balance the reference count
> increased earlier by dma_request_channel(), which may cause refcount
> leaks. What's more, the "nc->mck" object also needs to be handled
> correctly.

You might want to split this into two commits.

> 
> Fix it by adding specific error handling code in those error paths.

You need a Fixes tag here.

> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>

You can't do that. The patch is rather straightforward, so 3
authorship seem a little bit too much.

If someone suggested you a change, or sent you a proposal, you should
use a Suggested-by. If it was reported by a colleague, use Reported-by.
If it was co-developped, use the right tag and the right Signed-off-by
as documented in the submitted-process.rst file. If you picked the
patch from someone else, you must preserve the authorship and just add
your SoB.

> ---
>  drivers/mtd/nand/raw/atmel/nand-controller.c | 22 +++++++++++++++++---
>  1 file changed, 19 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
> index f3276ee9e..b3801ebd2 100644
> --- a/drivers/mtd/nand/raw/atmel/nand-controller.c
> +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
> @@ -2060,13 +2060,15 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
>  	nc->mck = of_clk_get(dev->parent->of_node, 0);
>  	if (IS_ERR(nc->mck)) {
>  		dev_err(dev, "Failed to retrieve MCK clk\n");
> -		return PTR_ERR(nc->mck);
> +		ret = PTR_ERR(nc->mck);
> +		goto out_release_dma;
>  	}
>  
>  	np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0);
>  	if (!np) {
>  		dev_err(dev, "Missing or invalid atmel,smc property\n");
> -		return -EINVAL;
> +		ret = -EINVAL;
> +		goto out_put_clk;
>  	}
>  
>  	nc->smc = syscon_node_to_regmap(np);
> @@ -2074,10 +2076,24 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
>  	if (IS_ERR(nc->smc)) {
>  		ret = PTR_ERR(nc->smc);
>  		dev_err(dev, "Could not get SMC regmap (err = %d)\n", ret);
> -		return ret;
> +		goto out_put_clk;
>  	}
>  
>  	return 0;
> +
> +out_put_clk:
> +	clk_put(nc->mck);
> +	nc->mck = NULL;
> +
> +out_release_dma:
> +	if (nc->caps->has_dma && !atmel_nand_avoid_dma) {
> +		if (!IS_ERR_OR_NULL(nc->dmac)) {

	   && !IS_ERR...

> +			dma_release_channel(nc->dmac);
> +			nc->dmac = NULL;
> +		}
> +	}
> +
> +	return ret;
>  }
>  
>  static int


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

      reply	other threads:[~2022-01-25 17:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-25 12:31 [PATCH] mtd: rawnand: atmel: fix refcount leaks in atmel_nand_controller_init Xin Xiong
2022-01-25 17:55 ` Miquel Raynal [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220125185556.6afb7eba@xps13 \
    --to=miquel.raynal@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=richard@nod.at \
    --cc=tanxin.ctf@gmail.com \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    --cc=xiongx18@fudan.edu.cn \
    --cc=xiyuyang19@fudan.edu.cn \
    --cc=yuanxzhang@fudan.edu.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).