[PATCH v5 22/32] mtd: spi-nor: xilinx: rename vendor specific functions and defines

[Michael Walle <michael@walle.cc>]

Drop the generic spi_nor prefix for all the xilinx functions.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
---
 drivers/mtd/spi-nor/xilinx.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 05c7fe843a7d..ffd5579d45cb 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -8,9 +8,9 @@
 
 #include "core.h"
 
-#define SPINOR_OP_XSE		0x50	/* Sector erase */
-#define SPINOR_OP_XPP		0x82	/* Page program */
-#define SPINOR_OP_XRDSR		0xd7	/* Read status register */
+#define XILINX_OP_SE		0x50	/* Sector erase */
+#define XILINX_OP_PP		0x82	/* Page program */
+#define XILINX_OP_RDSR		0xd7	/* Read status register */
 
 #define XSR_PAGESIZE		BIT(0)	/* Page size in Po2 or Linear */
 #define XSR_RDY			BIT(7)	/* Ready */
@@ -60,20 +60,20 @@ static u32 s3an_nor_convert_addr(struct spi_nor *nor, u32 addr)
 }
 
 /**
- * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
+ * xilinx_nor_read_sr() - Read the Status Register on S3AN flashes.
  * @nor:	pointer to 'struct spi_nor'.
  * @sr:		pointer to a DMA-able buffer where the value of the
  *              Status Register will be written.
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
+static int xilinx_nor_read_sr(struct spi_nor *nor, u8 *sr)
 {
 	int ret;
 
 	if (nor->spimem) {
 		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 0),
+			SPI_MEM_OP(SPI_MEM_OP_CMD(XILINX_OP_RDSR, 0),
 				   SPI_MEM_OP_NO_ADDR,
 				   SPI_MEM_OP_NO_DUMMY,
 				   SPI_MEM_OP_DATA_IN(1, sr, 0));
@@ -82,7 +82,7 @@ static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
 
 		ret = spi_mem_exec_op(nor->spimem, &op);
 	} else {
-		ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_XRDSR, sr,
+		ret = spi_nor_controller_ops_read_reg(nor, XILINX_OP_RDSR, sr,
 						      1);
 	}
 
@@ -93,17 +93,17 @@ static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
 }
 
 /**
- * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
- * the flash is ready for new commands.
+ * xilinx_nor_sr_ready() - Query the Status Register of the S3AN flash to see
+ * if the flash is ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
  * Return: 1 if ready, 0 if not ready, -errno on errors.
  */
-static int spi_nor_xsr_ready(struct spi_nor *nor)
+static int xilinx_nor_sr_ready(struct spi_nor *nor)
 {
 	int ret;
 
-	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+	ret = xilinx_nor_read_sr(nor, nor->bouncebuf);
 	if (ret)
 		return ret;
 
@@ -116,12 +116,12 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 	u32 page_size;
 	int ret;
 
-	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+	ret = xilinx_nor_read_sr(nor, nor->bouncebuf);
 	if (ret)
 		return ret;
 
-	nor->erase_opcode = SPINOR_OP_XSE;
-	nor->program_opcode = SPINOR_OP_XPP;
+	nor->erase_opcode = XILINX_OP_SE;
+	nor->program_opcode = XILINX_OP_PP;
 	nor->read_opcode = SPINOR_OP_READ;
 	nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
 
@@ -155,7 +155,7 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 static void xilinx_nor_late_init(struct spi_nor *nor)
 {
 	nor->params->setup = xilinx_nor_setup;
-	nor->params->ready = spi_nor_xsr_ready;
+	nor->params->ready = xilinx_nor_sr_ready;
 }
 
 static const struct spi_nor_fixups xilinx_nor_fixups = {
-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/