[PATCH v5 27/32] mtd: spi-nor: spansion: slightly rework control flow in late_init()

[Michael Walle <michael@walle.cc>]

Don't return early when the flash is smaller than or equal to 16MiB. We
need to be able to register hooks for all sizes of flashes. This also has
the benefit that it increases the readability of the code because the
action, i.e. registering the fixups, is connected to the condition, i.e.
flashes larger than 16MiB.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Pratyush Yadav <p.yadav@ti.com> # on mt35xu512aba, s28hs512t
---
 drivers/mtd/spi-nor/spansion.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 5affa8ae43a7..1a0e7214d9e5 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -296,13 +296,12 @@ static const struct flash_info spansion_nor_parts[] = {
 
 static void spansion_nor_late_init(struct spi_nor *nor)
 {
-	if (nor->params->size <= SZ_16M)
-		return;
-
-	nor->flags |= SNOR_F_4B_OPCODES;
-	/* No small sector erase for 4-byte command set */
-	nor->erase_opcode = SPINOR_OP_SE;
-	nor->mtd.erasesize = nor->info->sector_size;
+	if (nor->params->size > SZ_16M) {
+		nor->flags |= SNOR_F_4B_OPCODES;
+		/* No small sector erase for 4-byte command set */
+		nor->erase_opcode = SPINOR_OP_SE;
+		nor->mtd.erasesize = nor->info->sector_size;
+	}
 }
 
 static const struct spi_nor_fixups spansion_nor_fixups = {
-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/