From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E4D3EC43217 for ; Fri, 11 Mar 2022 08:06:25 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=c94CZC/F3TAB+v5yeZrCMqWEIFBWaGynv3Ka6v0U4to=; b=pJa6nsS/jP52t/ Ezn2oBU2K4AZN0PrsU+3e1JE7k92gUENt10lTzmQCSLNsZUa2PMmAE7lwyvpFtNNNuUAZ/AJGuQM1 JFi1Gh9382/mhvMtZfzb/BkEg1WJtZSLV0PEJqIdY6N4z3q14Ry9JJ2CNru1Kht4JukXUBBe7WlsU t2rONJIY3e17/fT//8Dx7Sl8sjC9H+CeTNY+Cvg6yRIkAqZrCaAXchFnWYvfg76SxppyEtMubzULY hhKts3CtfqUCGWtRIWqNPI2d4XH2G+73FyZ5gkEGuisHkEhBS0ekEGhxLqrYmz0aZGsJMxWTKNK6a qdRZEJjCJNPrBlcNT6nQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nSaHD-00FST2-TK; Fri, 11 Mar 2022 08:05:32 +0000 Received: from esa.microchip.iphmx.com ([68.232.154.123]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nSaE0-00FRSS-K7 for linux-mtd@lists.infradead.org; Fri, 11 Mar 2022 08:02:14 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1646985733; x=1678521733; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=IhsW26KDVAuX2rqNqzl4LM5mRu0w+edNUhiiIx7cWkg=; b=nE+jafGcmHUcfkLsV87p5m7JW1s2ZdCXTT0+87NTlG0r6+ihH0qfImfA lz8GtEjcquE9PT4OUZ2Z1FObS3TExRaBrhK8mMn501k4HwUdHbdPE50gm zujnan+9nVp03jLGG2IzVXNoM+cgJ3SFuwBeyWUkq0kGEcyKnup9mWext GZl2GNr/zX2fyFOufD16qcvqHvYGrKcAKL7J8j8qZnRuCpVndIeYXDIHo hAri9ylU+7xe6NYHlE40IO+W8our8+LgA8qOWsYATImAakrIpxVynTCsB nzJzt8x2GebOEJ1osAKczNZ9078chl8Z/01ougP58st/cn9U0qNHKZR6D Q==; X-IronPort-AV: E=Sophos;i="5.90,173,1643698800"; d="scan'208";a="148864968" Received: from smtpout.microchip.com (HELO email.microchip.com) ([198.175.253.82]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 11 Mar 2022 01:02:12 -0700 Received: from chn-vm-ex01.mchp-main.com (10.10.85.143) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2375.17; Fri, 11 Mar 2022 01:02:11 -0700 Received: from ROB-ULT-M18064N.mchp-main.com (10.10.115.15) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server id 15.1.2375.17 via Frontend Transport; Fri, 11 Mar 2022 01:02:09 -0700 From: Tudor Ambarus To: , , CC: , , , , , , , Tudor Ambarus Subject: [PATCH v2 6/6] mtd: spi-nor: macronix: Add support for mx66lm1g45g Date: Fri, 11 Mar 2022 10:01:47 +0200 Message-ID: <20220311080147.453483-7-tudor.ambarus@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220311080147.453483-1-tudor.ambarus@microchip.com> References: <20220311080147.453483-1-tudor.ambarus@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220311_000212_803454_9C4D04C2 X-CRM114-Status: GOOD ( 23.10 ) X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-mtd" Errors-To: linux-mtd-bounces+linux-mtd=archiver.kernel.org@lists.infradead.org mx66lm1g45g supports just 1-1-1, 8-8-8 and 8D-8D-8D modes. There are versions of mx66lm1g45g which do not support SFDP, thus use SPI_NOR_SKIP_SFDP. The RDID command issued through the octal peripheral interface outputs data always in STR mode for whatever reason. Since 8D-8D-8S is not common, avoid reading the ID when enabling the octal dtr mode. Instead, read back the CR2 to check if the switch was successful. Tested in 1-1-1 and 8d-8d-8d modes using sama7g5 QSPI IP. Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20220209133656.374903-8-tudor.ambarus@microchip.com --- drivers/mtd/spi-nor/macronix.c | 130 +++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c index c267cbcc7f1d..c9b9536f93f2 100644 --- a/drivers/mtd/spi-nor/macronix.c +++ b/drivers/mtd/spi-nor/macronix.c @@ -8,6 +8,128 @@ #include "core.h" +#define MACRONIX_NOR_OP_WRITE_CR2 0x72 /* Write Configuration Register 2 */ +#define MACRONIX_NOR_OP_DTR_RD 0xee /* Octa DTR Read Opcode */ + +#define MACRONIX_NOR_REG_CR2_MODE_ADDR 0 /* Address of Mode Enable in CR2 */ +#define MACRONIX_NOR_REG_CR2_DTR_OPI_ENABLE BIT(1) /* DTR OPI Enable */ +#define MACRONIX_NOR_REG_CR2_SPI 0 /* SPI Enable */ + +/* Macronix SPI NOR flash operations. */ +#define MACRONIX_NOR_WRITE_CR2_OP(addr, buf, ndata) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(MACRONIX_NOR_OP_WRITE_CR2, 0), \ + SPI_MEM_OP_ADDR(4, addr, 0), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_OUT(ndata, buf, 0)) + +static int macronix_nor_write_cr2(struct spi_nor *nor, u64 addr, u8 val) +{ + u8 *buf = nor->bouncebuf; + struct spi_mem_op op; + unsigned int nbytes; + int ret; + + if (spi_nor_protocol_is_dtr(nor->reg_proto)) { + /* + * When the flash is configured in 8D-8D-8D mode, halfwords are + * send/received instead of bytes. One byte transactions are not + * allowed in 8D-8D-8D mode, so we're going to send two bytes to + * the flash to pass the 8D-8D-8D sanity checks. Macronix + * ignores the second byte value in case of a one byte register + * writes, we don't care of the value of the second byte. + * When in 8D-8D-8D mode endianness must be configured according + * to the flash requirements. Macronix swaps data bytes on a + * 16-bit boundary, so the SPI NOR subsystem instructs the SPI + * controllers to swap the bytes back to keep compatibility with + * the STR modes. The swap back is always done regardless if + * it's a register or data access. Since Macronix ignores the + * second byte value on register writes and the SPI controllers + * will swap the bytes, we actually have to set the value on the + * second byte and ignore the first. + */ + buf[1] = val; + nbytes = 2; + + } else { + buf[0] = val; + nbytes = 1; + } + + op = (struct spi_mem_op)MACRONIX_NOR_WRITE_CR2_OP(addr, buf, nbytes); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + return spi_mem_exec_op(nor->spimem, &op); +} + +static int macronix_nor_octal_dtr_en(struct spi_nor *nor) +{ + u8 *buf = nor->bouncebuf; + int i, ret; + + ret = macronix_nor_write_cr2(nor, MACRONIX_NOR_REG_CR2_MODE_ADDR, + MACRONIX_NOR_REG_CR2_DTR_OPI_ENABLE); + if (ret) + return ret; + + /* Read flash ID to make sure the switch was successful. */ + ret = spi_nor_read_id(nor, 4, 4, buf, SNOR_PROTO_8_8_8_DTR); + if (ret) + return ret; + + for (i = 0; i < nor->info->id_len; i++) + if (buf[i * 2] != nor->info->id[i]) + return -EINVAL; + return 0; +} + +static int macronix_nor_octal_dtr_dis(struct spi_nor *nor) +{ + u8 *buf = nor->bouncebuf; + int ret; + + ret = macronix_nor_write_cr2(nor, MACRONIX_NOR_REG_CR2_MODE_ADDR, + MACRONIX_NOR_REG_CR2_SPI); + if (ret) + return ret; + + ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1); + if (ret) + return ret; + + if (memcmp(buf, nor->info->id, nor->info->id_len)) { + dev_dbg(nor->dev, "Failed to disable 8D-8D-8D mode.\n"); + return -EINVAL; + } + return 0; +} + +static int macronix_nor_octal_dtr_enable(struct spi_nor *nor, bool enable) +{ + return enable ? macronix_nor_octal_dtr_en(nor) : + macronix_nor_octal_dtr_dis(nor); +} + +static void mx66lm1g45g_late_init(struct spi_nor *nor) +{ + nor->params->octal_dtr_enable = macronix_nor_octal_dtr_enable; + + /* Set the Fast Read settings. */ + nor->params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR; + spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_8_8_8_DTR], + 0, 20, MACRONIX_NOR_OP_DTR_RD, + SNOR_PROTO_8_8_8_DTR); + + nor->cmd_ext_type = SPI_NOR_EXT_INVERT; + nor->params->rdsr_dummy = 4; + nor->params->rdsr_addr_nbytes = 4; +} + +static struct spi_nor_fixups mx66lm1g45g_fixups = { + .late_init = mx66lm1g45g_late_init, +}; + static int mx25l25635_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, @@ -100,6 +222,14 @@ static const struct flash_info macronix_nor_parts[] = { { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096) NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) FIXUP_FLAGS(SPI_NOR_4B_OPCODES) }, + { "mx66lm1g45g", INFO(0xc2853b, 0, 64 * 1024, 2048) + NO_SFDP_FLAGS(SPI_NOR_SKIP_SFDP | SECT_4K | + SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP | + SPI_NOR_DTR_SWAB16) + FIXUP_FLAGS(SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE | + SPI_NOR_SOFT_RESET) + .fixups = &mx66lm1g45g_fixups, + }, }; static void macronix_nor_default_init(struct spi_nor *nor) -- 2.25.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/