From: Tokunori Ikegami <ikegami.t@gmail.com>
To: miquel.raynal@bootlin.com
Cc: linux-mtd@lists.infradead.org,
Tokunori Ikegami <ikegami.t@gmail.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH v5 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition
Date: Tue, 22 Mar 2022 11:10:01 +0900 [thread overview]
Message-ID: <20220322021001.138206-4-ikegami.t@gmail.com> (raw)
In-Reply-To: <20220322021001.138206-1-ikegami.t@gmail.com>
It is for the model number 01, 02, V1 and V2.
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
---
drivers/mtd/chips/cfi_cmdset_0002.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 59334530dd46..67453f59c69c 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -48,6 +48,7 @@
#define SST49LF040B 0x0050
#define SST49LF008A 0x005a
#define AT49BV6416 0x00d6
+#define S29GL064N_MN12 0x0c01
/*
* Status Register bit description. Used by flash devices that don't
@@ -445,7 +446,7 @@ static void fixup_quirks(struct mtd_info *mtd)
struct map_info *map = mtd->priv;
struct cfi_private *cfi = map->fldrv_priv;
- if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x0c01)
+ if (cfi->mfr == CFI_MFR_AMD && cfi->id == S29GL064N_MN12)
cfi->quirks |= CFI_QUIRK_DQ_TRUE_DATA;
}
@@ -475,7 +476,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_AMD, 0x0056, fixup_use_secsi },
{ CFI_MFR_AMD, 0x005C, fixup_use_secsi },
{ CFI_MFR_AMD, 0x005F, fixup_use_secsi },
- { CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors },
+ { CFI_MFR_AMD, S29GL064N_MN12, fixup_s29gl064n_sectors },
{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
@@ -833,7 +834,7 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
unsigned long addr, map_word *expected)
{
struct cfi_private *cfi = map->fldrv_priv;
- map_word d, t;
+ map_word oldd, curd;
int ret;
if (cfi_use_status_reg(cfi)) {
@@ -844,20 +845,20 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
*/
cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi,
cfi->device_type, NULL);
- t = map_read(map, addr);
+ curd = map_read(map, addr);
- return map_word_andequal(map, t, ready, ready);
+ return map_word_andequal(map, curd, ready, ready);
}
- d = map_read(map, addr);
- t = map_read(map, addr);
+ oldd = map_read(map, addr);
+ curd = map_read(map, addr);
- ret = map_word_equal(map, d, t);
+ ret = map_word_equal(map, oldd, curd);
if (!ret || !expected)
return ret;
- return map_word_equal(map, t, *expected);
+ return map_word_equal(map, curd, *expected);
}
static int __xipram chip_good(struct map_info *map, struct flchip *chip,
--
2.32.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-03-22 2:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-22 2:09 [PATCH v5 0/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N Tokunori Ikegami
2022-03-22 2:09 ` [PATCH v5 1/3] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write Tokunori Ikegami
2022-03-22 2:10 ` [PATCH v5 2/3] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N Tokunori Ikegami
2022-03-22 2:10 ` Tokunori Ikegami [this message]
2022-03-22 18:34 ` [PATCH v5 3/3] mtd: cfi_cmdset_0002: Add S29GL064N ID definition Miquel Raynal
2022-03-22 23:41 ` Tokunori Ikegami
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220322021001.138206-4-ikegami.t@gmail.com \
--to=ikegami.t@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox