public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Felix Matouschek <felix@matouschek.org>
To: linux-mtd@lists.infradead.org
Subject: [PATCH] mtd: spinand: Add support for XTX XT26G0xA
Date: Fri,  1 Apr 2022 23:29:51 +0200	[thread overview]
Message-ID: <20220401212951.1133780-1-felix@matouschek.org> (raw)

Add support for XTX Technology XT26G01AXXXXX, XTX26G02AXXXXX and
XTX26G04AXXXXX SPI NAND.

These are 3V, 1G/2G/4Gbit serial SLC NAND flash devices with on-die ECC
(8bit strength per 512bytes).

Tested on Teltonika RUTX10 flashed with OpenWrt.

Datasheets available at
http://www.xtxtech.com/download/?AId=225
https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT26G01AWSEGA_C558841.pdf

Signed-off-by: Felix Matouschek <felix@matouschek.org>
---
 drivers/mtd/nand/spi/Makefile |   2 +-
 drivers/mtd/nand/spi/core.c   |   1 +
 drivers/mtd/nand/spi/xtx.c    | 122 ++++++++++++++++++++++++++++++++++
 include/linux/mtd/spinand.h   |   1 +
 4 files changed, 125 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mtd/nand/spi/xtx.c

diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 9662b9c1d5a9..80dabe6ff0f3 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
+spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
 obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index ff8336870bc0..d5b685d1605e 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -933,6 +933,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
 	&paragon_spinand_manufacturer,
 	&toshiba_spinand_manufacturer,
 	&winbond_spinand_manufacturer,
+	&xtx_spinand_manufacturer,
 };
 
 static int spinand_manufacturer_match(struct spinand_device *spinand,
diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
new file mode 100644
index 000000000000..95fe37790f87
--- /dev/null
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Author:
+ * Felix Matouschek <felix@matouschek.org>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_XTX	0x0B
+
+#define XT26G0XA_STATUS_ECC_MASK	GENMASK(5, 2)
+#define XT26G0XA_STATUS_ECC_NO_DETECTED	(0 << 2)
+#define XT26G0XA_STATUS_ECC_8_CORRECTED	(3 << 4)
+#define XT26G0XA_STATUS_ECC_UNCOR_ERROR	(2 << 4)
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int xt26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 8;
+	region->length = 40;
+
+	return 0;
+}
+
+static int xt26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 1;
+	region->length = 7;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops xt26g0xa_ooblayout = {
+	.ecc = xt26g0xa_ooblayout_ecc,
+	.free = xt26g0xa_ooblayout_free,
+};
+
+static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
+					 u8 status)
+{
+	switch (status & XT26G0XA_STATUS_ECC_MASK) {
+	case XT26G0XA_STATUS_ECC_NO_DETECTED:
+		return 0;
+	case XT26G0XA_STATUS_ECC_8_CORRECTED:
+		return 8;
+	case XT26G0XA_STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+	default: /* (1 << 2) through (7 << 2) are 1-7 corrected errors */
+		return (status & XT26G0XA_STATUS_ECC_MASK) >> 2;
+	}
+
+	return -EINVAL;
+}
+
+static const struct spinand_info xtx_spinand_table[] = {
+	SPINAND_INFO("XT26G01A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+				     xt26g0xa_ecc_get_status)),
+	SPINAND_INFO("XT26G02A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE2),
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+				     xt26g0xa_ecc_get_status)),
+	SPINAND_INFO("XT26G04A",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE3),
+		     NAND_MEMORG(1, 2048, 64, 128, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
+				     xt26g0xa_ecc_get_status)),
+};
+
+static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer xtx_spinand_manufacturer = {
+	.id = SPINAND_MFR_XTX,
+	.name = "XTX",
+	.chips = xtx_spinand_table,
+	.nchips = ARRAY_SIZE(xtx_spinand_table),
+	.ops = &xtx_spinand_manuf_ops,
+};
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 3aa28240a77f..5584d3bb6556 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -266,6 +266,7 @@ extern const struct spinand_manufacturer micron_spinand_manufacturer;
 extern const struct spinand_manufacturer paragon_spinand_manufacturer;
 extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
 extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+extern const struct spinand_manufacturer xtx_spinand_manufacturer;
 
 /**
  * struct spinand_op_variants - SPI NAND operation variants
-- 
2.35.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2022-04-01 21:38 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-01 21:29 Felix Matouschek [this message]
2022-04-04  8:41 ` [PATCH] mtd: spinand: Add support for XTX XT26G0xA Miquel Raynal
2022-04-06 16:16   ` Felix Matouschek
2022-04-07  7:09     ` Chuanhong Guo
2022-04-07  7:50       ` Miquel Raynal
2022-04-08 16:22       ` Felix Matouschek
  -- strict thread matches above, loose matches on Subject: below --
2021-07-02 19:52 Felix Matouschek
2021-12-22 11:27 ` Felix Matouschek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220401212951.1133780-1-felix@matouschek.org \
    --to=felix@matouschek.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox