From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: richard@nod.at, pratyush@kernel.org, vigneshr@ti.com,
michael@walle.cc, linux-mtd@lists.infradead.org
Subject: Re: [GIT PULL] mtd: spi-nor: Changes for 6.2
Date: Mon, 5 Dec 2022 15:42:03 +0100 [thread overview]
Message-ID: <20221205154203.081545c2@xps-13> (raw)
In-Reply-To: <de60f4e6-e663-413c-171e-88ed8285d876@linaro.org>
Hi Tudor,
tudor.ambarus@linaro.org wrote on Fri, 2 Dec 2022 14:16:19 +0200:
> Hi, Richard,
>
> You'll have to do a small manual merge as indicated by Stephen at:
> https://lore.kernel.org/linux-next/20221118120726.6c410939@canb.auug.org.au/
>
> Thanks,
> ta
Pulled, thanks!
Miquèl
>
> The following changes since commit 247f34f7b80357943234f93f247a1ae6b6c3a740:
>
> Linux 6.1-rc2 (2022-10-23 15:27:33 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/spi-nor/for-6.2
>
> for you to fetch changes up to 1799cd8540b67b88514c82f5fae1c75b986bcbd8:
>
> mtd: spi-nor: add SFDP fixups for Quad Page Program (2022-11-22 08:19:01 +0200)
>
> ----------------------------------------------------------------
> SPI NOR core changes:
> * Add support for flash reset using the dt reset-gpios property.
> * Update hwcaps.mask to include 8D-8D-8D read and page program ops
> when xSPI profile 1.0 table is defined.
> * Bypass zero erase size in spi_nor_find_best_erase_type().
> * Fix select_uniform_erase to skip 0 erase size
> * Add generic flash driver. If a flash is not found in the flash_info
> array, fall back to the generic flash driver which is described solely
> by the flash's SFDP tables.
> * Fix the number of bytes for the dummy cycles in
> spi_nor_spimem_check_readop().
> * Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP discoverable.
>
> SPI NOR manufacturer drivers changes:
> * Spansion:
> - use PARSE_SFDP for s28hs512t,
> - add support for s28hl512t, s28hl01gt, and s28hs01gt.
> * Gigadevice: Replace default_init() with post_bfpt() for gd25q256.
> * Micron - ST: Enable locking for mt25qu256a.
> * Winbond: Add support for W25Q512NW-IQ.
> * ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP.
>
> ----------------------------------------------------------------
> Alexander Sverdlin (1):
> mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()
>
> Allen-KH Cheng (1):
> mtd: spi-nor: Fix the number of bytes for the dummy cycles
>
> Eliav Farber (1):
> mtd: spi-nor: micron-st: Enable locking for mt25qu256a
>
> Jae Hyun Yoo (1):
> mtd: spi-nor: winbond: add support for W25Q512NW-IQ
>
> Jonathan Neuschäfer (1):
> mtd: spi-nor: Fix formatting in spi_nor_read_raw() kerneldoc comment
>
> Michael Walle (7):
> mtd: spi-nor: hide jedec_id sysfs attribute if not present
> mtd: spi-nor: sysfs: hide manufacturer if it is not set
> mtd: spi-nor: remember full JEDEC flash ID
> mtd: spi-nor: move function declaration out of sfdp.h
> mtd: spi-nor: fix select_uniform_erase to skip 0 erase size
> mtd: spi-nor: add generic flash driver
> mtd: spi-nor: sysfs: print JEDEC ID for generic flash driver
>
> Sai Krishna Potthuri (2):
> dt-bindings: mtd: spi-nor: Add reset-gpios property
> mtd: spi-nor: Add support for flash reset
>
> Sudip Mukherjee (2):
> mtd: spi-nor: issi: is25wp256: Init flash based on SFDP
> mtd: spi-nor: add SFDP fixups for Quad Page Program
>
> Takahiro Kuwano (4):
> mtd: spi-nor: sfdp: Update params->hwcaps.mask at xSPI profile 1.0 table parse
> mtd: spi-nor: spansion: Remove NO_SFDP_FLAGS from s28hs512t info
> mtd: spi-nor: spansion: Rename s28hs512t prefix
> mtd: spi-nor: spansion: Add s28hl512t, s28hl01gt, and s28hs01gt info
>
> Tudor Ambarus (3):
> mtd: spi-nor: spansion: Replace hardcoded values for addr_nbytes/addr_mode_nbytes
> mtd: spi-nor: micron-st.c: Replace hardcoded values for addr_nbytes/addr_mode_nbytes
> mtd: spi-nor: core: Add an error message when failing to exit the 4-byte address mode
>
> Yaliang Wang (1):
> mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt
>
> Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor | 6 +++
> Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 8 ++++
> drivers/mtd/spi-nor/core.c | 85 +++++++++++++++++++++++++++++++++---
> drivers/mtd/spi-nor/core.h | 5 +++
> drivers/mtd/spi-nor/debugfs.c | 2 +-
> drivers/mtd/spi-nor/gigadevice.c | 24 +++++++---
> drivers/mtd/spi-nor/issi.c | 5 ++-
> drivers/mtd/spi-nor/micron-st.c | 12 +++--
> drivers/mtd/spi-nor/sfdp.c | 37 +++++++++++++++-
> drivers/mtd/spi-nor/sfdp.h | 2 -
> drivers/mtd/spi-nor/spansion.c | 61 ++++++++++++++++----------
> drivers/mtd/spi-nor/sysfs.c | 20 ++++++++-
> drivers/mtd/spi-nor/winbond.c | 3 ++
> include/linux/mtd/spi-nor.h | 3 ++
> 14 files changed, 228 insertions(+), 45 deletions(-)
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
prev parent reply other threads:[~2022-12-05 14:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-02 12:16 [GIT PULL] mtd: spi-nor: Changes for 6.2 Tudor Ambarus
2022-12-05 14:42 ` Miquel Raynal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221205154203.081545c2@xps-13 \
--to=miquel.raynal@bootlin.com \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox