Re: [PATCH v2 1/2] mtd: rawnand: stm32_fmc2: do not support EDO mode

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hi Tudor,

tudor.ambarus@linaro.org wrote on Mon, 27 Mar 2023 11:29:56 +0100:

> Hi,
> 
> On 3/27/23 10:47, Christophe Kerello wrote:
> > FMC2 controller does not support EDO mode (timings mode 4 and 5).
> >   
> 
> commit subject and message should be in imperative mood, so I would
> change the commit subject to "mtd: rawnand: stm32_fmc2: Remove
> unsupported EDO mode" and the message to something like "Remove the EDO
> mode support from as the FMC2 controller does not support the feature."
> Extra points if you describe what happened when you used timings mode 4
> and 5 with the current version of the driver.
> 
> Miquel, could you add Cc to stable when applying?
> Cc: stable@vger.kernel.org

Yes, absolutely.

> 
> > Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> > Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")  
> 
> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> 
> > ---
> >  drivers/mtd/nand/raw/stm32_fmc2_nand.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> > index 5d627048c420..3abb63d00a0b 100644
> > --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> > +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
> > @@ -1531,6 +1531,9 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
> >  	if (IS_ERR(sdrt))
> >  		return PTR_ERR(sdrt);
> >  
> > +	if (sdrt->tRC_min < 30000)
> > +		return -EOPNOTSUPP;
> > +
> >  	if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
> >  		return 0;
> >    


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/