[PATCH v3 00/11] mtd: spi-nor: spansion: Add support for Infineon S28HS02GT

[PATCH v3 00/11] mtd: spi-nor: spansion: Add support for Infineon S28HS02GT

[Tudor Ambarus]

Takahiro, since you already have to test all these flashes, I took the
liberty and added some other changes that would be good to have. The
first one lets SFDP determine the flash size and sector size. Michael is
in the process of changing how INFO is handled, we'd like to get rid of
these params when SFDP tables are defined. The other 2 patches
consolidates a bit the spansion code with the idea that we should use
the same code paths for both single (SCP) and multi chip package (MCP)
flashes were possible. We avoid this way code duplication and have
better test coverage on the code. On your patches I modified how/where
"if (!params->n_dice || !params->vreg_offset)" is handled. Please review
all and if you agree with the changes, retest on all flashes. Everything
looks good to me, if the tests pass, I'll queue all.

Cheers,
ta

Takahiro Kuwano (8):
  mtd: spi-nor: spansion: use CLPEF as an alternative to CLSR
  mtd: spi-nor: spansion: preserve CFR2V[7] when writing MEMLAT
  mtd: spi-nor: spansion: prepare octal dtr methods for multi chip
    support
  mtd: spi-nor: spansion: switch set_octal_dtr method to use vreg_offset
  mtd: spi-nor: spansion: switch h28hx's ready() to use vreg_offset
  mtd: spi-nor: spansion: add MCP support in set_octal_dtr()
  mtd: spi-nor: spansion: add octal DTR support in RD_ANY_REG_OP
  mtd: spi-nor: spansion: add support for S28HS02GT

Tudor Ambarus (3):
  mtd: spi-nor: spansion: let SFDP determine the flash and sector size
  mtd: spi-nor: spansion: switch s25hx_t to use vreg_offset for
    quad_enable()
  mtd: spi-nor: spansion: switch cypress_nor_get_page_size() to use
    vreg_offset

 drivers/mtd/spi-nor/atmel.c     |   8 +-
 drivers/mtd/spi-nor/core.c      |  23 ++-
 drivers/mtd/spi-nor/core.h      |   4 +-
 drivers/mtd/spi-nor/issi.c      |   4 +-
 drivers/mtd/spi-nor/macronix.c  |   4 +-
 drivers/mtd/spi-nor/micron-st.c |   4 +-
 drivers/mtd/spi-nor/spansion.c  | 294 +++++++++++++++++++++-----------
 drivers/mtd/spi-nor/sst.c       |   8 +-
 drivers/mtd/spi-nor/winbond.c   |   4 +-
 drivers/mtd/spi-nor/xilinx.c    |   4 +-
 10 files changed, 239 insertions(+), 118 deletions(-)

-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 01/11] mtd: spi-nor: spansion: use CLPEF as an alternative to CLSR

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Infineon S28Hx (SEMPER Octal) and S25FS256T (SEMPER Nano) support Clear
Program and Erase Failure Flags (CLPEF, 82h) instead of CLSR(30h).
Introduce a new mfr_flag together with the infrastructure to allow
manufacturer private data in the core. With this we remove the need
to have if checks in the code at runtime and instead set the correct
opcodes at probe time. S25Hx (SEMPER QSPI) supports CLSR but it may
be disabled by CFR3x[2] while CLPEF is always available. Therefore,
the mfr_flag is also applied to S25Hx for safety.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
 drivers/mtd/spi-nor/atmel.c     |  8 +++-
 drivers/mtd/spi-nor/core.c      | 23 +++++++----
 drivers/mtd/spi-nor/core.h      |  4 +-
 drivers/mtd/spi-nor/issi.c      |  4 +-
 drivers/mtd/spi-nor/macronix.c  |  4 +-
 drivers/mtd/spi-nor/micron-st.c |  4 +-
 drivers/mtd/spi-nor/spansion.c  | 72 ++++++++++++++++++++++++++-------
 drivers/mtd/spi-nor/sst.c       |  8 +++-
 drivers/mtd/spi-nor/winbond.c   |  4 +-
 drivers/mtd/spi-nor/xilinx.c    |  4 +-
 10 files changed, 103 insertions(+), 32 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index 656dd80a0be7..58968c1e7d2f 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -48,9 +48,11 @@ static const struct spi_nor_locking_ops at25fs_nor_locking_ops = {
 	.is_locked = at25fs_nor_is_locked,
 };
 
-static void at25fs_nor_late_init(struct spi_nor *nor)
+static int at25fs_nor_late_init(struct spi_nor *nor)
 {
 	nor->params->locking_ops = &at25fs_nor_locking_ops;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups at25fs_nor_fixups = {
@@ -149,9 +151,11 @@ static const struct spi_nor_locking_ops atmel_nor_global_protection_ops = {
 	.is_locked = atmel_nor_is_global_protected,
 };
 
-static void atmel_nor_global_protection_late_init(struct spi_nor *nor)
+static int atmel_nor_global_protection_late_init(struct spi_nor *nor)
 {
 	nor->params->locking_ops = &atmel_nor_global_protection_ops;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups atmel_nor_global_protection_fixups = {
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 273258f7e77f..614960c7d22c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2900,16 +2900,23 @@ static void spi_nor_init_fixup_flags(struct spi_nor *nor)
  * SFDP standard, or where SFDP tables are not defined at all.
  * Will replace the spi_nor_manufacturer_init_params() method.
  */
-static void spi_nor_late_init_params(struct spi_nor *nor)
+static int spi_nor_late_init_params(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
+	int ret;
 
 	if (nor->manufacturer && nor->manufacturer->fixups &&
-	    nor->manufacturer->fixups->late_init)
-		nor->manufacturer->fixups->late_init(nor);
+	    nor->manufacturer->fixups->late_init) {
+		ret = nor->manufacturer->fixups->late_init(nor);
+		if (ret)
+			return ret;
+	}
 
-	if (nor->info->fixups && nor->info->fixups->late_init)
-		nor->info->fixups->late_init(nor);
+	if (nor->info->fixups && nor->info->fixups->late_init) {
+		ret = nor->info->fixups->late_init(nor);
+		if (ret)
+			return ret;
+	}
 
 	/* Default method kept for backward compatibility. */
 	if (!params->set_4byte_addr_mode)
@@ -2927,6 +2934,8 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
 
 	if (nor->info->n_banks > 1)
 		params->bank_size = div64_u64(params->size, nor->info->n_banks);
+
+	return 0;
 }
 
 /**
@@ -3085,9 +3094,7 @@ static int spi_nor_init_params(struct spi_nor *nor)
 		spi_nor_init_params_deprecated(nor);
 	}
 
-	spi_nor_late_init_params(nor);
-
-	return 0;
+	return spi_nor_late_init_params(nor);
 }
 
 /** spi_nor_set_octal_dtr() - enable or disable Octal DTR I/O.
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index f2fc2cf78e55..9217379b9cfe 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -378,6 +378,7 @@ struct spi_nor_otp {
  *			than reading the status register to indicate they
  *			are ready for a new command
  * @locking_ops:	SPI NOR locking methods.
+ * @priv:		flash's private data.
  */
 struct spi_nor_flash_parameter {
 	u64				bank_size;
@@ -406,6 +407,7 @@ struct spi_nor_flash_parameter {
 	int (*ready)(struct spi_nor *nor);
 
 	const struct spi_nor_locking_ops *locking_ops;
+	void *priv;
 };
 
 /**
@@ -432,7 +434,7 @@ struct spi_nor_fixups {
 			 const struct sfdp_parameter_header *bfpt_header,
 			 const struct sfdp_bfpt *bfpt);
 	int (*post_sfdp)(struct spi_nor *nor);
-	void (*late_init)(struct spi_nor *nor);
+	int (*late_init)(struct spi_nor *nor);
 };
 
 /**
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 400e2b42f45a..accdf7aa2bfd 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -29,7 +29,7 @@ static const struct spi_nor_fixups is25lp256_fixups = {
 	.post_bfpt = is25lp256_post_bfpt_fixups,
 };
 
-static void pm25lv_nor_late_init(struct spi_nor *nor)
+static int pm25lv_nor_late_init(struct spi_nor *nor)
 {
 	struct spi_nor_erase_map *map = &nor->params->erase_map;
 	int i;
@@ -38,6 +38,8 @@ static void pm25lv_nor_late_init(struct spi_nor *nor)
 	for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
 		if (map->erase_type[i].size == 4096)
 			map->erase_type[i].opcode = SPINOR_OP_BE_4K_PMC;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups pm25lv_nor_fixups = {
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 04888258e891..eb149e517c1f 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -110,10 +110,12 @@ static void macronix_nor_default_init(struct spi_nor *nor)
 	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
 }
 
-static void macronix_nor_late_init(struct spi_nor *nor)
+static int macronix_nor_late_init(struct spi_nor *nor)
 {
 	if (!nor->params->set_4byte_addr_mode)
 		nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_en4b_ex4b;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups macronix_nor_fixups = {
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index f79e71d99124..6ad080c52ab5 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -429,7 +429,7 @@ static void micron_st_nor_default_init(struct spi_nor *nor)
 	nor->params->quad_enable = NULL;
 }
 
-static void micron_st_nor_late_init(struct spi_nor *nor)
+static int micron_st_nor_late_init(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 
@@ -438,6 +438,8 @@ static void micron_st_nor_late_init(struct spi_nor *nor)
 
 	if (!params->set_4byte_addr_mode)
 		params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_wren_en4b_ex4b;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups micron_st_nor_fixups = {
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 314667d4b8a8..6b2532ed053c 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -4,14 +4,17 @@
  * Copyright (C) 2014, Freescale Semiconductor, Inc.
  */
 
+#include <linux/device.h>
 #include <linux/mtd/spi-nor.h>
 
 #include "core.h"
 
 /* flash_info mfr_flag. Used to clear sticky prorietary SR bits. */
 #define USE_CLSR	BIT(0)
+#define USE_CLPEF	BIT(1)
 
 #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
+#define SPINOR_OP_CLPEF		0x82	/* Clear program/erase failure flags */
 #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
 #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
 #define SPINOR_REG_CYPRESS_VREG			0x00800000
@@ -57,22 +60,32 @@
 		   SPI_MEM_OP_DUMMY(ndummy, 0),				\
 		   SPI_MEM_OP_DATA_IN(1, buf, 0))
 
-#define SPANSION_CLSR_OP						\
-	SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 0),			\
+#define SPANSION_OP(opcode)						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 0),				\
 		   SPI_MEM_OP_NO_ADDR,					\
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_NO_DATA)
 
+/**
+ * struct spansion_nor_params - Spansion private parameters.
+ * @clsr:	Clear Status Register or Clear Program and Erase Failure Flag
+ *		opcode.
+ */
+struct spansion_nor_params {
+	u8 clsr;
+};
+
 /**
  * spansion_nor_clear_sr() - Clear the Status Register.
  * @nor:	pointer to 'struct spi_nor'.
  */
 static void spansion_nor_clear_sr(struct spi_nor *nor)
 {
+	const struct spansion_nor_params *priv_params = nor->params->priv;
 	int ret;
 
 	if (nor->spimem) {
-		struct spi_mem_op op = SPANSION_CLSR_OP;
+		struct spi_mem_op op = SPANSION_OP(priv_params->clsr);
 
 		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
 
@@ -528,9 +541,11 @@ static int s25fs256t_post_sfdp_fixup(struct spi_nor *nor)
 	return 0;
 }
 
-static void s25fs256t_late_init(struct spi_nor *nor)
+static int s25fs256t_late_init(struct spi_nor *nor)
 {
 	cypress_nor_ecc_init(nor);
+
+	return 0;
 }
 
 static struct spi_nor_fixups s25fs256t_fixups = {
@@ -586,7 +601,7 @@ static int s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
 	return cypress_nor_get_page_size(nor);
 }
 
-static void s25hx_t_late_init(struct spi_nor *nor)
+static int s25hx_t_late_init(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 
@@ -598,6 +613,8 @@ static void s25hx_t_late_init(struct spi_nor *nor)
 	/* Replace ready() with multi die version */
 	if (params->n_dice)
 		params->ready = cypress_nor_sr_ready_and_clear;
+
+	return 0;
 }
 
 static struct spi_nor_fixups s25hx_t_fixups = {
@@ -659,10 +676,12 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
 	return cypress_nor_set_addr_mode_nbytes(nor);
 }
 
-static void s28hx_t_late_init(struct spi_nor *nor)
+static int s28hx_t_late_init(struct spi_nor *nor)
 {
 	nor->params->set_octal_dtr = cypress_nor_set_octal_dtr;
 	cypress_nor_ecc_init(nor);
+
+	return 0;
 }
 
 static const struct spi_nor_fixups s28hx_t_fixups = {
@@ -786,47 +805,54 @@ static const struct flash_info spansion_nor_parts[] = {
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
 	{ "s25fs256t",  INFO6(0x342b19, 0x0f0890, 0, 0)
 		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25fs256t_fixups },
 	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 256 * 1024, 256)
 		PARSE_SFDP
-		MFR_FLAGS(USE_CLSR)
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 256 * 1024, 512)
 		PARSE_SFDP
-		MFR_FLAGS(USE_CLSR)
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hl02gt",  INFO6(0x342a1c, 0x0f0090, 0, 0)
 		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
 		FLAGS(NO_CHIP_ERASE)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 256 * 1024, 256)
 		PARSE_SFDP
-		MFR_FLAGS(USE_CLSR)
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 256 * 1024, 512)
 		PARSE_SFDP
-		MFR_FLAGS(USE_CLSR)
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hs02gt",  INFO6(0x342b1c, 0x0f0090, 0, 0)
 		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
 		FLAGS(NO_CHIP_ERASE)
 		.fixups = &s25hx_t_fixups },
 	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
 		FLAGS(SPI_NOR_NO_ERASE) },
 	{ "s28hl512t",   INFO(0x345a1a,      0, 256 * 1024, 256)
 		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 	{ "s28hl01gt",   INFO(0x345a1b,      0, 256 * 1024, 512)
 		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 	{ "s28hs512t",   INFO(0x345b1a,      0, 256 * 1024, 256)
 		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 	{ "s28hs01gt",   INFO(0x345b1b,      0, 256 * 1024, 512)
 		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 };
@@ -870,17 +896,35 @@ static int spansion_nor_sr_ready_and_clear(struct spi_nor *nor)
 	return !(nor->bouncebuf[0] & SR_WIP);
 }
 
-static void spansion_nor_late_init(struct spi_nor *nor)
+static int spansion_nor_late_init(struct spi_nor *nor)
 {
-	if (nor->params->size > SZ_16M) {
+	struct spi_nor_flash_parameter *params = nor->params;
+	struct spansion_nor_params *priv_params;
+	u8 mfr_flags = nor->info->mfr_flags;
+
+	if (params->size > SZ_16M) {
 		nor->flags |= SNOR_F_4B_OPCODES;
 		/* No small sector erase for 4-byte command set */
 		nor->erase_opcode = SPINOR_OP_SE;
 		nor->mtd.erasesize = nor->info->sector_size;
 	}
 
-	if (nor->info->mfr_flags & USE_CLSR)
-		nor->params->ready = spansion_nor_sr_ready_and_clear;
+	if (mfr_flags & (USE_CLSR | USE_CLPEF)) {
+		priv_params = devm_kmalloc(nor->dev, sizeof(*priv_params),
+					   GFP_KERNEL);
+		if (!priv_params)
+			return -ENOMEM;
+
+		if (mfr_flags & USE_CLSR)
+			priv_params->clsr = SPINOR_OP_CLSR;
+		else if (mfr_flags & USE_CLPEF)
+			priv_params->clsr = SPINOR_OP_CLPEF;
+
+		params->priv = priv_params;
+		params->ready = spansion_nor_sr_ready_and_clear;
+	}
+
+	return 0;
 }
 
 static const struct spi_nor_fixups spansion_nor_fixups = {
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 688eb20c763e..09fdc7023e09 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -49,9 +49,11 @@ static const struct spi_nor_locking_ops sst26vf_nor_locking_ops = {
 	.is_locked = sst26vf_nor_is_locked,
 };
 
-static void sst26vf_nor_late_init(struct spi_nor *nor)
+static int sst26vf_nor_late_init(struct spi_nor *nor)
 {
 	nor->params->locking_ops = &sst26vf_nor_locking_ops;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups sst26vf_nor_fixups = {
@@ -203,10 +205,12 @@ static int sst_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 	return ret;
 }
 
-static void sst_nor_late_init(struct spi_nor *nor)
+static int sst_nor_late_init(struct spi_nor *nor)
 {
 	if (nor->info->mfr_flags & SST_WRITE)
 		nor->mtd._write = sst_nor_write;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups sst_nor_fixups = {
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 63ba8e3a96f5..cd99c9a1c568 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -217,7 +217,7 @@ static const struct spi_nor_otp_ops winbond_nor_otp_ops = {
 	.is_locked = spi_nor_otp_is_locked_sr2,
 };
 
-static void winbond_nor_late_init(struct spi_nor *nor)
+static int winbond_nor_late_init(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 
@@ -233,6 +233,8 @@ static void winbond_nor_late_init(struct spi_nor *nor)
 	 * from BFPT, if any.
 	 */
 	params->set_4byte_addr_mode = winbond_nor_set_4byte_addr_mode;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups winbond_nor_fixups = {
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 7175de8aa336..00d53eae5ee8 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -155,10 +155,12 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 	return 0;
 }
 
-static void xilinx_nor_late_init(struct spi_nor *nor)
+static int xilinx_nor_late_init(struct spi_nor *nor)
 {
 	nor->params->setup = xilinx_nor_setup;
 	nor->params->ready = xilinx_nor_sr_ready;
+
+	return 0;
 }
 
 static const struct spi_nor_fixups xilinx_nor_fixups = {
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 02/11] mtd: spi-nor: spansion: preserve CFR2V[7] when writing MEMLAT

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

CFR2V[7] is assigned to Flash's address mode (3- or 4-ybte) and must not
be changed when writing MEMLAT (CFR2V[3:0]). CFR2V shall be used in a read,
update, write back fashion.

Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
---
 drivers/mtd/spi-nor/spansion.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 6b2532ed053c..6460d2247bdf 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -4,6 +4,7 @@
  * Copyright (C) 2014, Freescale Semiconductor, Inc.
  */
 
+#include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/mtd/spi-nor.h>
 
@@ -28,6 +29,7 @@
 #define SPINOR_REG_CYPRESS_CFR2			0x3
 #define SPINOR_REG_CYPRESS_CFR2V					\
 	(SPINOR_REG_CYPRESS_VREG + SPINOR_REG_CYPRESS_CFR2)
+#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK	GENMASK(3, 0)
 #define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24	0xb
 #define SPINOR_REG_CYPRESS_CFR2_ADRBYT		BIT(7)
 #define SPINOR_REG_CYPRESS_CFR3			0x4
@@ -161,8 +163,18 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	int ret;
 	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
 
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
+					  SPINOR_REG_CYPRESS_CFR2V, 0, buf);
+
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
 	/* Use 24 dummy cycles for memory array reads. */
-	*buf = SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24;
+	*buf &= ~SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK;
+	*buf |= FIELD_PREP(SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK,
+			   SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24);
 	op = (struct spi_mem_op)
 		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
 					  SPINOR_REG_CYPRESS_CFR2V, 1, buf);
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 03/11] mtd: spi-nor: spansion: prepare octal dtr methods for multi chip support

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Infineon's multi-chip package (MCP) devices require the octal DTR
configuration to be set for each die. Split common code in
dedicated methods to ease the octal DDR MCP support addition.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 50 +++++++++++++++++++++++++---------
 1 file changed, 37 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 6460d2247bdf..51eabddf2b16 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -156,7 +156,7 @@ static int cypress_nor_sr_ready_and_clear(struct spi_nor *nor)
 	return 1;
 }
 
-static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
+static int cypress_nor_set_memlat(struct spi_nor *nor, u64 addr)
 {
 	struct spi_mem_op op;
 	u8 *buf = nor->bouncebuf;
@@ -164,8 +164,7 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
 
 	op = (struct spi_mem_op)
-		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes,
-					  SPINOR_REG_CYPRESS_CFR2V, 0, buf);
+		CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes, addr, 0, buf);
 
 	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
 	if (ret)
@@ -176,8 +175,7 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	*buf |= FIELD_PREP(SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK,
 			   SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24);
 	op = (struct spi_mem_op)
-		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
-					  SPINOR_REG_CYPRESS_CFR2V, 1, buf);
+		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes, addr, 1, buf);
 
 	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
 	if (ret)
@@ -185,13 +183,33 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 
 	nor->read_dummy = 24;
 
+	return 0;
+}
+
+static int cypress_nor_set_octal_dtr_bits(struct spi_nor *nor, u64 addr)
+{
+	struct spi_mem_op op;
+	u8 *buf = nor->bouncebuf;
+
 	/* Set the octal and DTR enable bits. */
 	buf[0] = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN;
 	op = (struct spi_mem_op)
-		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
-					  SPINOR_REG_CYPRESS_CFR5V, 1, buf);
+		CYPRESS_NOR_WR_ANY_REG_OP(nor->params->addr_mode_nbytes,
+					  addr, 1, buf);
 
-	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	return spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+}
+
+static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
+{
+	u8 *buf = nor->bouncebuf;
+	int ret;
+
+	ret = cypress_nor_set_memlat(nor, SPINOR_REG_CYPRESS_CFR2V);
+	if (ret)
+		return ret;
+
+	ret = cypress_nor_set_octal_dtr_bits(nor, SPINOR_REG_CYPRESS_CFR5V);
 	if (ret)
 		return ret;
 
@@ -209,11 +227,10 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	return 0;
 }
 
-static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
+static int cypress_nor_set_single_spi_bits(struct spi_nor *nor, u64 addr)
 {
 	struct spi_mem_op op;
 	u8 *buf = nor->bouncebuf;
-	int ret;
 
 	/*
 	 * The register is 1-byte wide, but 1-byte transactions are not allowed
@@ -223,9 +240,16 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 	buf[0] = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_DS;
 	buf[1] = 0;
 	op = (struct spi_mem_op)
-		CYPRESS_NOR_WR_ANY_REG_OP(nor->addr_nbytes,
-					  SPINOR_REG_CYPRESS_CFR5V, 2, buf);
-	ret = spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR);
+		CYPRESS_NOR_WR_ANY_REG_OP(nor->addr_nbytes, addr, 2, buf);
+	return spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR);
+}
+
+static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
+{
+	u8 *buf = nor->bouncebuf;
+	int ret;
+
+	ret = cypress_nor_set_single_spi_bits(nor, SPINOR_REG_CYPRESS_CFR5V);
 	if (ret)
 		return ret;
 
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 04/11] mtd: spi-nor: spansion: switch set_octal_dtr method to use vreg_offset

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

All the Infineon flashes that currently support octal DTR mode
define the optional SCCR SFDP table, thus all retrieve vreg_offset.
Switch all the available octal DTR Infineon flashes to use the
volatile register offset to set the configuration registers. The goal
is to have a single pair of methods for both single/multi-chip package
devices.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 51eabddf2b16..dc4841891b74 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -6,6 +6,7 @@
 
 #include <linux/bitfield.h>
 #include <linux/device.h>
+#include <linux/errno.h>
 #include <linux/mtd/spi-nor.h>
 
 #include "core.h"
@@ -202,14 +203,18 @@ static int cypress_nor_set_octal_dtr_bits(struct spi_nor *nor, u64 addr)
 
 static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 {
+	const struct spi_nor_flash_parameter *params = nor->params;
 	u8 *buf = nor->bouncebuf;
+	u64 addr;
 	int ret;
 
-	ret = cypress_nor_set_memlat(nor, SPINOR_REG_CYPRESS_CFR2V);
+	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR2;
+	ret = cypress_nor_set_memlat(nor, addr);
 	if (ret)
 		return ret;
 
-	ret = cypress_nor_set_octal_dtr_bits(nor, SPINOR_REG_CYPRESS_CFR5V);
+	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
+	ret = cypress_nor_set_octal_dtr_bits(nor, addr);
 	if (ret)
 		return ret;
 
@@ -247,9 +252,11 @@ static int cypress_nor_set_single_spi_bits(struct spi_nor *nor, u64 addr)
 static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 {
 	u8 *buf = nor->bouncebuf;
+	u64 addr;
 	int ret;
 
-	ret = cypress_nor_set_single_spi_bits(nor, SPINOR_REG_CYPRESS_CFR5V);
+	addr = nor->params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
+	ret = cypress_nor_set_single_spi_bits(nor, addr);
 	if (ret)
 		return ret;
 
@@ -714,7 +721,15 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
 
 static int s28hx_t_late_init(struct spi_nor *nor)
 {
-	nor->params->set_octal_dtr = cypress_nor_set_octal_dtr;
+	struct spi_nor_flash_parameter *params = nor->params;
+
+	if (!params->n_dice || !params->vreg_offset) {
+		dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	params->set_octal_dtr = cypress_nor_set_octal_dtr;
 	cypress_nor_ecc_init(nor);
 
 	return 0;
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 05/11] mtd: spi-nor: spansion: switch h28hx's ready() to use vreg_offset

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

s28hx is the sole user of cypress_nor_set_octal_dtr, which already
uses vreg_offset to set octal DTR. Switch the ready method to use
vreg_offset as well. This is a preparation patch. The goal is to use
the same s28hx methods for the multi die version of the flash.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index dc4841891b74..5b6f36b56e9f 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -730,6 +730,7 @@ static int s28hx_t_late_init(struct spi_nor *nor)
 	}
 
 	params->set_octal_dtr = cypress_nor_set_octal_dtr;
+	params->ready = cypress_nor_sr_ready_and_clear;
 	cypress_nor_ecc_init(nor);
 
 	return 0;
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 06/11] mtd: spi-nor: spansion: add MCP support in set_octal_dtr()

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Infineon multi-chip package (MCP) devices require the Octal DTR
configuraion to be set on each die. We can access to configuration
registers in each die by using params->n_dice and params->vreg_offset[]
populated from SFDP. Add MCP support in set_octal_dtr().

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 5b6f36b56e9f..28d0a995f3b9 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -206,17 +206,19 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	const struct spi_nor_flash_parameter *params = nor->params;
 	u8 *buf = nor->bouncebuf;
 	u64 addr;
-	int ret;
+	int i, ret;
 
-	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR2;
-	ret = cypress_nor_set_memlat(nor, addr);
-	if (ret)
-		return ret;
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR2;
+		ret = cypress_nor_set_memlat(nor, addr);
+		if (ret)
+			return ret;
 
-	addr = params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
-	ret = cypress_nor_set_octal_dtr_bits(nor, addr);
-	if (ret)
-		return ret;
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR5;
+		ret = cypress_nor_set_octal_dtr_bits(nor, addr);
+		if (ret)
+			return ret;
+	}
 
 	/* Read flash ID to make sure the switch was successful. */
 	ret = spi_nor_read_id(nor, nor->addr_nbytes, 3, buf,
@@ -251,14 +253,17 @@ static int cypress_nor_set_single_spi_bits(struct spi_nor *nor, u64 addr)
 
 static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 {
+	const struct spi_nor_flash_parameter *params = nor->params;
 	u8 *buf = nor->bouncebuf;
 	u64 addr;
-	int ret;
+	int i, ret;
 
-	addr = nor->params->vreg_offset[0] + SPINOR_REG_CYPRESS_CFR5;
-	ret = cypress_nor_set_single_spi_bits(nor, addr);
-	if (ret)
-		return ret;
+	for (i = 0; i < params->n_dice; i++) {
+		addr = params->vreg_offset[i] + SPINOR_REG_CYPRESS_CFR5;
+		ret = cypress_nor_set_single_spi_bits(nor, addr);
+		if (ret)
+			return ret;
+	}
 
 	/* Read flash ID to make sure the switch was successful. */
 	ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 07/11] mtd: spi-nor: spansion: add octal DTR support in RD_ANY_REG_OP

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

S28HS02GT uses RD_ANY_REG_OP to read status of each die. In Octal DTR
mode, RD_ANY_REG_OP needs dummy cycles (same as params->rdsr_dummy) and
data length should be 2.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 28d0a995f3b9..2fc3e65686b3 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -104,11 +104,17 @@ static void spansion_nor_clear_sr(struct spi_nor *nor)
 
 static int cypress_nor_sr_ready_and_clear_reg(struct spi_nor *nor, u64 addr)
 {
+	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_mem_op op =
-		CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_mode_nbytes, addr,
+		CYPRESS_NOR_RD_ANY_REG_OP(params->addr_mode_nbytes, addr,
 					  0, nor->bouncebuf);
 	int ret;
 
+	if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) {
+		op.dummy.nbytes = params->rdsr_dummy;
+		op.data.nbytes = 2;
+	}
+
 	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
 	if (ret)
 		return ret;
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 08/11] mtd: spi-nor: spansion: add support for S28HS02GT

[Tudor Ambarus]

From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>

Add support for S28HS02GT. Infineon S28HS02GT is a 2Gb,
multi-chip package, Octal SPI Flash.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 drivers/mtd/spi-nor/spansion.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 2fc3e65686b3..1f2b4a469719 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -695,22 +695,23 @@ static int cypress_nor_set_octal_dtr(struct spi_nor *nor, bool enable)
 
 static int s28hx_t_post_sfdp_fixup(struct spi_nor *nor)
 {
+	struct spi_nor_flash_parameter *params = nor->params;
 	/*
 	 * On older versions of the flash the xSPI Profile 1.0 table has the
 	 * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE.
 	 */
-	if (nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0)
-		nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode =
+	if (params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0)
+		params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode =
 			SPINOR_OP_CYPRESS_RD_FAST;
 
 	/* This flash is also missing the 4-byte Page Program opcode bit. */
-	spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP],
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
 				SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
 	/*
 	 * Since xSPI Page Program opcode is backward compatible with
 	 * Legacy SPI, use Legacy SPI opcode there as well.
 	 */
-	spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP_8_8_8_DTR],
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_8_8_8_DTR],
 				SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR);
 
 	/*
@@ -718,7 +719,11 @@ static int s28hx_t_post_sfdp_fixup(struct spi_nor *nor)
 	 * address bytes needed for Read Status Register command as 0 but the
 	 * actual value for that is 4.
 	 */
-	nor->params->rdsr_addr_nbytes = 4;
+	params->rdsr_addr_nbytes = 4;
+
+	/* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */
+	if (params->size == SZ_256M)
+		params->n_dice = 2;
 
 	return cypress_nor_get_page_size(nor);
 }
@@ -918,6 +923,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
+	{ "s28hs02gt",   INFO(0x345b1c,      0, 0, 0)
+		PARSE_SFDP
+		MFR_FLAGS(USE_CLPEF)
+		.fixups = &s28hx_t_fixups,
+	},
 };
 
 /**
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v3 09/11] mtd: spi-nor: spansion: let SFDP determine the flash and sector size

[Tudor Ambarus]

sector_size is used to determine the flash size and the erase size in
case of uniform erase. n_sectors is used to determine the flash_size.
But the flash size and the erase sizes are determined when parsing SFDP,
let SFDP determine them.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 drivers/mtd/spi-nor/spansion.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 1f2b4a469719..413573cdb4fc 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -875,11 +875,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25fs256t_fixups },
-	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 256 * 1024, 256)
+	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
-	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 256 * 1024, 512)
+	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
@@ -888,11 +888,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		MFR_FLAGS(USE_CLPEF)
 		FLAGS(NO_CHIP_ERASE)
 		.fixups = &s25hx_t_fixups },
-	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 256 * 1024, 256)
+	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
-	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 256 * 1024, 512)
+	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
@@ -903,22 +903,22 @@ static const struct flash_info spansion_nor_parts[] = {
 		.fixups = &s25hx_t_fixups },
 	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
 		FLAGS(SPI_NOR_NO_ERASE) },
-	{ "s28hl512t",   INFO(0x345a1a,      0, 256 * 1024, 256)
+	{ "s28hl512t",   INFO(0x345a1a,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
-	{ "s28hl01gt",   INFO(0x345a1b,      0, 256 * 1024, 512)
+	{ "s28hl01gt",   INFO(0x345a1b,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
-	{ "s28hs512t",   INFO(0x345b1a,      0, 256 * 1024, 256)
+	{ "s28hs512t",   INFO(0x345b1a,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
-	{ "s28hs01gt",   INFO(0x345b1b,      0, 256 * 1024, 512)
+	{ "s28hs01gt",   INFO(0x345b1b,      0, 0, 0)
 		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/