[PATCH 00/41] mtd: spi-nor: clean the flash_info database up

[PATCH 00/41] mtd: spi-nor: clean the flash_info database up

[Michael Walle]

The goal is to have slim entries for *new* entries and to have a
flexible macro to specify the flash ID and get rid of the former
INFOx() macros with the hardcoded ID length.

Here is are some examples how an entry of flash_info will look like
after the conversion:
  {
    .id = SNOR_ID(0xef, 0x80, 0x20),
    .name = "w25q512nwm",
    .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
  }

  {
    .id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x00, 0x80),
    .name = "s25fl256s0",
    .size = SZ_32M,
    .sector_size = SZ_256K,
    .no_sfdp_flags = SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
    .mfr_flags = USE_CLSR,
  }

Please note that the second entry might even be slimmed down if the
flash supports SFDP, which is very likely. But apart from one
exception, this patchset shouldn't change any information in the
flash_info database.

The exception is the removal of very old SPI EEPROMs and a Fujitsu MRAM.
Both should use the at25 EEPROM driver. The latter even has device tree
bindings for the at25 driver.

To make the entries as slim as possible, we introduce sane default
values so the actual flash_info entries, doesn't need to specify them.
This mostly applies to old non-SFDP flashes anyway.

Patches 01-02 remove the old catalyst EEPROMs and the Fujitsu MRAM.

Patches 03-16 are preparation patches to either convert properties
(like .n_sectors) or to make properties optional. These patches will
also modify the old INFOx() macros. This is important because with this
we can actually make sure, the conversion doesn't have any unwanted
changes. We can compare the .rodata segment before and after the
conversion to make sure, there are no mistakes in the patches, because
they are impossible to review.

To make sure there are no changes you can compare the output of
  objdump -j.rodata -s drivers/mtd/spi-nor/built-in.a

(or individual objects like drivers/mtd/spi-nor/winbond.o) before and
after the conversion, that is before patch 17 and after patch 30.

FWIW, before the conversion it was impossible to use coccinelle, eg.
"spatch --parse-c winbond.c" flagged almost all lines in the flash_info
structure as bad.

Now after the conversion is completed, patches 31-39 sort the
entries by their IDs.

Patch 40 removes a duplicate entry in atmel which surfaced during the
sorting.

Patch 41 then finally removes the old INFOx() macros.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
Michael Walle (41):
      mtd: spi-nor: remove catalyst 'flashes'
      mtd: spi-nor: remove Fujitsu MB85RS1MT support
      mtd: spi-nor: xilinx: use SPI_NOR_ID() in S3AN_INFO()
      mtd: spi-nor: xilinx: remove addr_nbytes from S3AN_INFO()
      mtd: spi-nor: convert .n_sectors to .size
      mtd: spi-nor: default page_size to 256 bytes
      mtd: spi-nor: store .n_banks in struct spi_nor_flash_parameter
      mtd: spi-nor: default .n_banks to 1
      mtd: spi-nor: push 4k SE handling into spi_nor_select_uniform_erase()
      mtd: spi-nor: make sector_size optional
      mtd: spi-nor: drop .parse_sfdp
      mtd: spi-nor: introduce (temporary) INFO0()
      mtd: spi-nor: move the .id and .id_len into an own structure
      mtd: spi-nor: rename .otp_org to .otp and make it a pointer
      mtd: spi-nor: add SNOR_ID() and SNOR_OTP()
      mtd: spi-nor: remove or move flash_info comments
      mtd: spi-nor: atmel: convert flash_info to new format
      mtd: spi-nor: eon: convert flash_info to new format
      mtd: spi-nor: esmt: convert flash_info to new format
      mtd: spi-nor: everspin: convert flash_info to new format
      mtd: spi-nor: gigadevice: convert flash_info to new format
      mtd: spi-nor: intel: convert flash_info to new format
      mtd: spi-nor: issi: convert flash_info to new format
      mtd: spi-nor: macronix: convert flash_info to new format
      mtd: spi-nor: micron-st: convert flash_info to new format
      mtd: spi-nor: spansion: convert flash_info to new format
      mtd: spi-nor: sst: convert flash_info to new format
      mtd: spi-nor: winbond: convert flash_info to new format
      mtd: spi-nor: xilinx: use new macros in S3AN_INFO()
      mtd: spi-nor: xmc: convert flash_info to new format
      mtd: spi-nor: atmel: sort flash_info database
      mtd: spi-nor: eon: sort flash_info database
      mtd: spi-nor: gigadevice: sort flash_info database
      mtd: spi-nor: issi: sort flash_info database
      mtd: spi-nor: macronix: sort flash_info database
      mtd: spi-nor: micron-st: sort flash_info database
      mtd: spi-nor: spansion: sort flash_info database
      mtd: spi-nor: sst: sort flash_info database
      mtd: spi-nor: winbond: sort flash_info entries
      mtd: spi-nor: atmel: drop duplicate entry
      mtd: spi-nor: core: get rid of the INFOx() macros

 drivers/mtd/spi-nor/atmel.c      | 116 +++++++----
 drivers/mtd/spi-nor/catalyst.c   |  24 ---
 drivers/mtd/spi-nor/core.c       |  63 +++---
 drivers/mtd/spi-nor/core.h       | 136 ++++++-------
 drivers/mtd/spi-nor/eon.c        |  74 +++++--
 drivers/mtd/spi-nor/esmt.c       |  29 ++-
 drivers/mtd/spi-nor/everspin.c   |  34 +++-
 drivers/mtd/spi-nor/fujitsu.c    |  21 --
 drivers/mtd/spi-nor/gigadevice.c |  82 ++++----
 drivers/mtd/spi-nor/intel.c      |  23 ++-
 drivers/mtd/spi-nor/issi.c       | 118 +++++++----
 drivers/mtd/spi-nor/macronix.c   | 220 ++++++++++++++-------
 drivers/mtd/spi-nor/micron-st.c  | 411 ++++++++++++++++++++++++++-------------
 drivers/mtd/spi-nor/spansion.c   | 389 ++++++++++++++++++++++--------------
 drivers/mtd/spi-nor/sst.c        | 156 +++++++++------
 drivers/mtd/spi-nor/swp.c        |  13 +-
 drivers/mtd/spi-nor/sysfs.c      |   6 +-
 drivers/mtd/spi-nor/winbond.c    | 286 +++++++++++++++++----------
 drivers/mtd/spi-nor/xilinx.c     |  32 ++-
 drivers/mtd/spi-nor/xmc.c        |  19 +-
 20 files changed, 1387 insertions(+), 865 deletions(-)
---
base-commit: f7dc24b3413851109c4047b22997bd0d95ed52a2
change-id: 20230807-mtd-flash-info-db-rework-8a52d60f0023


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 01/41] mtd: spi-nor: remove catalyst 'flashes'

[Michael Walle]

CAT25xx are actually EEPROMs manufactured by Catalyst. The devices are
ancient (DS are from 1998), there are not in-tree users, nor are there
any device tree bindings. Remove it. The correct driver is the at25.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/catalyst.c | 24 ------------------------
 drivers/mtd/spi-nor/core.c     |  1 -
 drivers/mtd/spi-nor/core.h     |  1 -
 3 files changed, 26 deletions(-)

diff --git a/drivers/mtd/spi-nor/catalyst.c b/drivers/mtd/spi-nor/catalyst.c
deleted file mode 100644
index 6d310815fb12..000000000000
--- a/drivers/mtd/spi-nor/catalyst.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2005, Intec Automation Inc.
- * Copyright (C) 2014, Freescale Semiconductor, Inc.
- */
-
-#include <linux/mtd/spi-nor.h>
-
-#include "core.h"
-
-static const struct flash_info catalyst_nor_parts[] = {
-	/* Catalyst / On Semiconductor -- non-JEDEC */
-	{ "cat25c11", CAT25_INFO(16, 8, 16, 1) },
-	{ "cat25c03", CAT25_INFO(32, 8, 16, 2) },
-	{ "cat25c09", CAT25_INFO(128, 8, 32, 2) },
-	{ "cat25c17", CAT25_INFO(256, 8, 32, 2) },
-	{ "cat25128", CAT25_INFO(2048, 8, 64, 2) },
-};
-
-const struct spi_nor_manufacturer spi_nor_catalyst = {
-	.name = "catalyst",
-	.parts = catalyst_nor_parts,
-	.nparts = ARRAY_SIZE(catalyst_nor_parts),
-};
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 614960c7d22c..8e43d171ffd0 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1998,7 +1998,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
 
 static const struct spi_nor_manufacturer *manufacturers[] = {
 	&spi_nor_atmel,
-	&spi_nor_catalyst,
 	&spi_nor_eon,
 	&spi_nor_esmt,
 	&spi_nor_everspin,
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 9217379b9cfe..6d31af6c39ed 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -631,7 +631,6 @@ struct sfdp {
 
 /* Manufacturer drivers. */
 extern const struct spi_nor_manufacturer spi_nor_atmel;
-extern const struct spi_nor_manufacturer spi_nor_catalyst;
 extern const struct spi_nor_manufacturer spi_nor_eon;
 extern const struct spi_nor_manufacturer spi_nor_esmt;
 extern const struct spi_nor_manufacturer spi_nor_everspin;

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 02/41] mtd: spi-nor: remove Fujitsu MB85RS1MT support

[Michael Walle]

This part is not a flash but an EEPROM like FRAM. It is even has a DT
binding for the (correct) driver (at25), see
Documentation/devicetree/bindings/eeprom/at25.yaml. Just remove it.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c    |  1 -
 drivers/mtd/spi-nor/core.h    |  1 -
 drivers/mtd/spi-nor/fujitsu.c | 21 ---------------------
 3 files changed, 23 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 8e43d171ffd0..a9ad55aab821 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2001,7 +2001,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
 	&spi_nor_eon,
 	&spi_nor_esmt,
 	&spi_nor_everspin,
-	&spi_nor_fujitsu,
 	&spi_nor_gigadevice,
 	&spi_nor_intel,
 	&spi_nor_issi,
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 6d31af6c39ed..dfc20a3296fb 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -634,7 +634,6 @@ extern const struct spi_nor_manufacturer spi_nor_atmel;
 extern const struct spi_nor_manufacturer spi_nor_eon;
 extern const struct spi_nor_manufacturer spi_nor_esmt;
 extern const struct spi_nor_manufacturer spi_nor_everspin;
-extern const struct spi_nor_manufacturer spi_nor_fujitsu;
 extern const struct spi_nor_manufacturer spi_nor_gigadevice;
 extern const struct spi_nor_manufacturer spi_nor_intel;
 extern const struct spi_nor_manufacturer spi_nor_issi;
diff --git a/drivers/mtd/spi-nor/fujitsu.c b/drivers/mtd/spi-nor/fujitsu.c
deleted file mode 100644
index 69cffc5c73ef..000000000000
--- a/drivers/mtd/spi-nor/fujitsu.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2005, Intec Automation Inc.
- * Copyright (C) 2014, Freescale Semiconductor, Inc.
- */
-
-#include <linux/mtd/spi-nor.h>
-
-#include "core.h"
-
-static const struct flash_info fujitsu_nor_parts[] = {
-	/* Fujitsu */
-	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1)
-		FLAGS(SPI_NOR_NO_ERASE) },
-};
-
-const struct spi_nor_manufacturer spi_nor_fujitsu = {
-	.name = "fujitsu",
-	.parts = fujitsu_nor_parts,
-	.nparts = ARRAY_SIZE(fujitsu_nor_parts),
-};

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 03/41] mtd: spi-nor: xilinx: use SPI_NOR_ID() in S3AN_INFO()

[Michael Walle]

In commit 59273180299a ("mtd: spi-nor: Create macros to define chip IDs
and geometries") SPI_NOR_ID() were introduced, but it did only update
the INFO() macro in core.h. Also use it in S3AN_INFO().

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/xilinx.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 00d53eae5ee8..de5189c38432 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -22,12 +22,7 @@
 		   SPI_MEM_OP_DATA_IN(1, buf, 0))
 
 #define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
-		.id = {							\
-			((_jedec_id) >> 16) & 0xff,			\
-			((_jedec_id) >> 8) & 0xff,			\
-			(_jedec_id) & 0xff				\
-			},						\
-		.id_len = 3,						\
+		SPI_NOR_ID(_jedec_id, 0),				\
 		.sector_size = (8 * (_page_size)),			\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 04/41] mtd: spi-nor: xilinx: remove addr_nbytes from S3AN_INFO()

[Michael Walle]

The default value of addr_nbytes is already 3. Drop it.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/xilinx.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index de5189c38432..34267591282c 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -27,7 +27,6 @@
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
 		.n_banks = 1,						\
-		.addr_nbytes = 3,					\
 		.flags = SPI_NOR_NO_FR
 
 /* Xilinx S3AN share MFR with Atmel SPI NOR */

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 05/41] mtd: spi-nor: convert .n_sectors to .size

[Michael Walle]

.n_sectors is rarely used. In fact it is only used in swp.c and to
calculate the flash size in the core. The use in swp.c might be
converted to use the (largest) flash erase size. For now, we just
locally calculate the sector size.

Simplify the flash_info database and set the size of the flash directly.
This also let us use the SZ_x macros.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c   | 2 +-
 drivers/mtd/spi-nor/core.h   | 8 ++++----
 drivers/mtd/spi-nor/swp.c    | 9 +++++----
 drivers/mtd/spi-nor/xilinx.c | 4 ++--
 4 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index a9ad55aab821..c504a5af4032 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2998,7 +2998,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 
 	/* Set SPI NOR sizes. */
 	params->writesize = 1;
-	params->size = (u64)info->sector_size * info->n_sectors;
+	params->size = info->size;
 	params->bank_size = params->size;
 	params->page_size = info->page_size;
 
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index dfc20a3296fb..12c35409493b 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -443,9 +443,9 @@ struct spi_nor_fixups {
  * @id:             the flash's ID bytes. The first three bytes are the
  *                  JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips).
  * @id_len:         the number of bytes of ID.
+ * @size:           the size of the flash in bytes.
  * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
  *                  isn't necessarily called a "sector" by the vendor.
- * @n_sectors:      the number of sectors.
  * @n_banks:        the number of banks.
  * @page_size:      the flash's page size.
  * @addr_nbytes:    number of address bytes to send.
@@ -505,8 +505,8 @@ struct flash_info {
 	char *name;
 	u8 id[SPI_NOR_MAX_ID_LEN];
 	u8 id_len;
+	size_t size;
 	unsigned sector_size;
-	u16 n_sectors;
 	u16 page_size;
 	u8 n_banks;
 	u8 addr_nbytes;
@@ -556,8 +556,8 @@ struct flash_info {
 	.id_len = 6
 
 #define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
+	.size = (_sector_size) * (_n_sectors),				\
 	.sector_size = (_sector_size),					\
-	.n_sectors = (_n_sectors),					\
 	.page_size = 256,						\
 	.n_banks = (_n_banks)
 
@@ -575,8 +575,8 @@ struct flash_info {
 	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
 
 #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
+		.size = (_sector_size) * (_n_sectors),			\
 		.sector_size = (_sector_size),				\
-		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
 		.n_banks = 1,						\
 		.addr_nbytes = (_addr_nbytes),				\
diff --git a/drivers/mtd/spi-nor/swp.c b/drivers/mtd/spi-nor/swp.c
index 5ab9d5324860..40bf52867095 100644
--- a/drivers/mtd/spi-nor/swp.c
+++ b/drivers/mtd/spi-nor/swp.c
@@ -34,17 +34,18 @@ static u8 spi_nor_get_sr_tb_mask(struct spi_nor *nor)
 static u64 spi_nor_get_min_prot_length_sr(struct spi_nor *nor)
 {
 	unsigned int bp_slots, bp_slots_needed;
+	unsigned int sector_size = nor->info->sector_size;
+	u64 n_sectors = div_u64(nor->params->size, sector_size);
 	u8 mask = spi_nor_get_sr_bp_mask(nor);
 
 	/* Reserved one for "protect none" and one for "protect all". */
 	bp_slots = (1 << hweight8(mask)) - 2;
-	bp_slots_needed = ilog2(nor->info->n_sectors);
+	bp_slots_needed = ilog2(n_sectors);
 
 	if (bp_slots_needed > bp_slots)
-		return nor->info->sector_size <<
-			(bp_slots_needed - bp_slots);
+		return sector_size << (bp_slots_needed - bp_slots);
 	else
-		return nor->info->sector_size;
+		return sector_size;
 }
 
 static void spi_nor_get_locked_range_sr(struct spi_nor *nor, u8 sr, loff_t *ofs,
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 34267591282c..284e2e4970ab 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -23,8 +23,8 @@
 
 #define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
 		SPI_NOR_ID(_jedec_id, 0),				\
+		.size = 8 * (_page_size) * (_n_sectors),		\
 		.sector_size = (8 * (_page_size)),			\
-		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
 		.n_banks = 1,						\
 		.flags = SPI_NOR_NO_FR
@@ -138,7 +138,7 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 		page_size = (nor->params->page_size == 264) ? 256 : 512;
 		nor->params->page_size = page_size;
 		nor->mtd.writebufsize = page_size;
-		nor->params->size = 8 * page_size * nor->info->n_sectors;
+		nor->params->size = nor->info->size;
 		nor->mtd.erasesize = 8 * page_size;
 	} else {
 		/* Flash in Default addressing mode */

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 06/41] mtd: spi-nor: default page_size to 256 bytes

[Michael Walle]

The INFO() macro always set the page_size to 256 bytes. Make that an
optinal parameter. This default is a sane one for all older flashes,
newer ones will set the page size by its SFDP tables anyway.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c | 7 +------
 drivers/mtd/spi-nor/core.h | 8 ++++++--
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index c504a5af4032..138bc1e0a67c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2017,11 +2017,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
 static const struct flash_info spi_nor_generic_flash = {
 	.name = "spi-nor-generic",
 	.n_banks = 1,
-	/*
-	 * JESD216 rev A doesn't specify the page size, therefore we need a
-	 * sane default.
-	 */
-	.page_size = 256,
 	.parse_sfdp = true,
 };
 
@@ -3000,7 +2995,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 	params->writesize = 1;
 	params->size = info->size;
 	params->bank_size = params->size;
-	params->page_size = info->page_size;
+	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
 
 	if (!(info->flags & SPI_NOR_NO_FR)) {
 		/* Default to Fast Read for DT and non-DT platform devices. */
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 12c35409493b..25bc18197614 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -10,6 +10,11 @@
 #include "sfdp.h"
 
 #define SPI_NOR_MAX_ID_LEN	6
+/*
+ * 256 bytes is a sane default for most older flashes. Newer flashes will
+ * have the page size defined within their SFDP tables.
+ */
+#define SPI_NOR_DEFAULT_PAGE_SIZE 256
 
 /* Standard SPI NOR flash operations. */
 #define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
@@ -447,7 +452,7 @@ struct spi_nor_fixups {
  * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
  *                  isn't necessarily called a "sector" by the vendor.
  * @n_banks:        the number of banks.
- * @page_size:      the flash's page size.
+ * @page_size:      (optional) the flash's page size. Defaults to 256.
  * @addr_nbytes:    number of address bytes to send.
  *
  * @parse_sfdp:     true when flash supports SFDP tables. The false value has no
@@ -558,7 +563,6 @@ struct flash_info {
 #define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
 	.size = (_sector_size) * (_n_sectors),				\
 	.sector_size = (_sector_size),					\
-	.page_size = 256,						\
 	.n_banks = (_n_banks)
 
 /* Used when the "_ext_id" is two bytes at most */

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 07/41] mtd: spi-nor: store .n_banks in struct spi_nor_flash_parameter

[Michael Walle]

First, fixups might want to replace the n_banks parameter, thus we need
it in the (writable) parameter struct. Secondly, this way we can have a
default in the core and just skip setting the n_banks in the flash_info
database. Most of the flashes doesn't have more than one bank.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c | 7 ++++---
 drivers/mtd/spi-nor/core.h | 2 ++
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 138bc1e0a67c..ea94fb0da1e5 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2861,7 +2861,7 @@ static void spi_nor_init_flags(struct spi_nor *nor)
 	if (flags & NO_CHIP_ERASE)
 		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
 
-	if (flags & SPI_NOR_RWW && nor->info->n_banks > 1 &&
+	if (flags & SPI_NOR_RWW && nor->params->n_banks > 1 &&
 	    !nor->controller_ops)
 		nor->flags |= SNOR_F_RWW;
 }
@@ -2925,8 +2925,8 @@ static int spi_nor_late_init_params(struct spi_nor *nor)
 	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
 		spi_nor_init_default_locking_ops(nor);
 
-	if (nor->info->n_banks > 1)
-		params->bank_size = div64_u64(params->size, nor->info->n_banks);
+	if (params->n_banks > 1)
+		params->bank_size = div64_u64(params->size, params->n_banks);
 
 	return 0;
 }
@@ -2996,6 +2996,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 	params->size = info->size;
 	params->bank_size = params->size;
 	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
+	params->n_banks = info->n_banks;
 
 	if (!(info->flags & SPI_NOR_NO_FR)) {
 		/* Default to Fast Read for DT and non-DT platform devices. */
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 25bc18197614..fe1ce232a6c8 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -358,6 +358,7 @@ struct spi_nor_otp {
  *			in octal DTR mode.
  * @rdsr_addr_nbytes:	dummy address bytes needed for Read Status Register
  *			command in octal DTR mode.
+ * @n_banks:		the number of banks.
  * @n_dice:		number of dice in the flash memory.
  * @vreg_offset:	volatile register offset for each die.
  * @hwcaps:		describes the read and page program hardware
@@ -394,6 +395,7 @@ struct spi_nor_flash_parameter {
 	u8				addr_mode_nbytes;
 	u8				rdsr_dummy;
 	u8				rdsr_addr_nbytes;
+	u8				n_banks;
 	u8				n_dice;
 	u32				*vreg_offset;
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 08/41] mtd: spi-nor: default .n_banks to 1

[Michael Walle]

If .n_banks is not set in the flash_info database, the default value
should be 1. This way, we don't have to always set the .n_banks
parameter in flash_info.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c   | 3 +--
 drivers/mtd/spi-nor/core.h   | 8 ++++----
 drivers/mtd/spi-nor/xilinx.c | 1 -
 3 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index ea94fb0da1e5..015152ba8973 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2016,7 +2016,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
 
 static const struct flash_info spi_nor_generic_flash = {
 	.name = "spi-nor-generic",
-	.n_banks = 1,
 	.parse_sfdp = true,
 };
 
@@ -2996,7 +2995,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 	params->size = info->size;
 	params->bank_size = params->size;
 	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
-	params->n_banks = info->n_banks;
+	params->n_banks = info->n_banks ?: SPI_NOR_DEFAULT_N_BANKS;
 
 	if (!(info->flags & SPI_NOR_NO_FR)) {
 		/* Default to Fast Read for DT and non-DT platform devices. */
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index fe1ce232a6c8..c90445e186c0 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -15,6 +15,7 @@
  * have the page size defined within their SFDP tables.
  */
 #define SPI_NOR_DEFAULT_PAGE_SIZE 256
+#define SPI_NOR_DEFAULT_N_BANKS 1
 
 /* Standard SPI NOR flash operations. */
 #define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
@@ -453,7 +454,7 @@ struct spi_nor_fixups {
  * @size:           the size of the flash in bytes.
  * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
  *                  isn't necessarily called a "sector" by the vendor.
- * @n_banks:        the number of banks.
+ * @n_banks:        (optional) the number of banks. Defaults to 1.
  * @page_size:      (optional) the flash's page size. Defaults to 256.
  * @addr_nbytes:    number of address bytes to send.
  *
@@ -570,7 +571,7 @@ struct flash_info {
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
 
 #define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
@@ -578,13 +579,12 @@ struct flash_info {
 
 #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
 
 #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
 		.size = (_sector_size) * (_n_sectors),			\
 		.sector_size = (_sector_size),				\
 		.page_size = (_page_size),				\
-		.n_banks = 1,						\
 		.addr_nbytes = (_addr_nbytes),				\
 		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 284e2e4970ab..8d4539e32dfe 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -26,7 +26,6 @@
 		.size = 8 * (_page_size) * (_n_sectors),		\
 		.sector_size = (8 * (_page_size)),			\
 		.page_size = (_page_size),				\
-		.n_banks = 1,						\
 		.flags = SPI_NOR_NO_FR
 
 /* Xilinx S3AN share MFR with Atmel SPI NOR */

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 09/41] mtd: spi-nor: push 4k SE handling into spi_nor_select_uniform_erase()

[Michael Walle]

4k sector erase sizes are only a thing with uniform erase types. Push
the "we want 4k erase sizes" handling into spi_nor_select_uniform_erase().

One might wonder why the former sector_size isn't used anymore. It is
because we either search for the largest erase size or if selected
through kconfig, the 4k erase size. Now, why is that correct? For this,
we have to differentiate between (1) flashes with SFDP and (2) without
SFDP. For (1), we just set one (or two if SECT_4K is set) erase types
and wanted_size is exactly one of these.

For (2) things are a bit more complicated. For flashes which we don't
have in our flash_info database, the generic driver is used and
sector_size was already 0, which in turn selected the largest erase
size. For flashes which had SFDP and an entry in flash_info, sector_size
was always the largest sector and thus the largest erase type.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 015152ba8973..5c6a0edafae2 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2511,13 +2511,6 @@ static int spi_nor_select_pp(struct spi_nor *nor,
 /**
  * spi_nor_select_uniform_erase() - select optimum uniform erase type
  * @map:		the erase map of the SPI NOR
- * @wanted_size:	the erase type size to search for. Contains the value of
- *			info->sector_size, the "small sector" size in case
- *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined or 0 if
- *			there is no information about the sector size. The
- *			latter is the case if the flash parameters are parsed
- *			solely by SFDP, then the largest supported erase type
- *			is selected.
  *
  * Once the optimum uniform sector erase command is found, disable all the
  * other.
@@ -2525,13 +2518,16 @@ static int spi_nor_select_pp(struct spi_nor *nor,
  * Return: pointer to erase type on success, NULL otherwise.
  */
 static const struct spi_nor_erase_type *
-spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
-			     const u32 wanted_size)
+spi_nor_select_uniform_erase(struct spi_nor_erase_map *map)
 {
 	const struct spi_nor_erase_type *tested_erase, *erase = NULL;
 	int i;
 	u8 uniform_erase_type = map->uniform_erase_type;
 
+	/*
+	 * Search for the biggest erase size, except for when compiled
+	 * to use 4k erases.
+	 */
 	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
 		if (!(uniform_erase_type & BIT(i)))
 			continue;
@@ -2543,10 +2539,11 @@ spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
 			continue;
 
 		/*
-		 * If the current erase size is the one, stop here:
+		 * If the current erase size is the 4k one, stop here,
 		 * we have found the right uniform Sector Erase command.
 		 */
-		if (tested_erase->size == wanted_size) {
+		if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_4K_SECTORS) &&
+		    tested_erase->size == SZ_4K) {
 			erase = tested_erase;
 			break;
 		}
@@ -2574,7 +2571,6 @@ static int spi_nor_select_erase(struct spi_nor *nor)
 	struct spi_nor_erase_map *map = &nor->params->erase_map;
 	const struct spi_nor_erase_type *erase = NULL;
 	struct mtd_info *mtd = &nor->mtd;
-	u32 wanted_size = nor->info->sector_size;
 	int i;
 
 	/*
@@ -2585,13 +2581,8 @@ static int spi_nor_select_erase(struct spi_nor *nor)
 	 * manage the SPI flash memory as uniform with a single erase sector
 	 * size, when possible.
 	 */
-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-	/* prefer "small sector" erase if possible */
-	wanted_size = 4096u;
-#endif
-
 	if (spi_nor_has_uniform_erase(nor)) {
-		erase = spi_nor_select_uniform_erase(map, wanted_size);
+		erase = spi_nor_select_uniform_erase(map);
 		if (!erase)
 			return -EINVAL;
 		nor->erase_opcode = erase->opcode;

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 10/41] mtd: spi-nor: make sector_size optional

[Michael Walle]

Most of the (old, non-SFDP) flashes use a sector size of 64k. Make that
a default value so it can be optional in the flash_info database.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c | 6 ++++--
 drivers/mtd/spi-nor/core.h | 8 +++++---
 drivers/mtd/spi-nor/swp.c  | 6 +++++-
 3 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 5c6a0edafae2..cf0e25b4f9a9 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2755,7 +2755,8 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_nor_erase_map *map = &params->erase_map;
-	const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
+	const struct flash_info *info = nor->info;
+	const u8 no_sfdp_flags = info->no_sfdp_flags;
 	u8 i, erase_mask;
 
 	if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
@@ -2809,7 +2810,8 @@ static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 		i++;
 	}
 	erase_mask |= BIT(i);
-	spi_nor_set_erase_type(&map->erase_type[i], nor->info->sector_size,
+	spi_nor_set_erase_type(&map->erase_type[i],
+			       info->sector_size ?: SPI_NOR_DEFAULT_SECTOR_SIZE,
 			       SPINOR_OP_SE);
 	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
 }
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index c90445e186c0..734aedd4d62c 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -16,6 +16,7 @@
  */
 #define SPI_NOR_DEFAULT_PAGE_SIZE 256
 #define SPI_NOR_DEFAULT_N_BANKS 1
+#define SPI_NOR_DEFAULT_SECTOR_SIZE SZ_64K
 
 /* Standard SPI NOR flash operations. */
 #define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
@@ -452,8 +453,9 @@ struct spi_nor_fixups {
  *                  JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips).
  * @id_len:         the number of bytes of ID.
  * @size:           the size of the flash in bytes.
- * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
- *                  isn't necessarily called a "sector" by the vendor.
+ * @sector_size:    (optional) the size listed here is what works with
+ *                  SPINOR_OP_SE, which isn't necessarily called a "sector" by
+ *                  the vendor. Defaults to 64k.
  * @n_banks:        (optional) the number of banks. Defaults to 1.
  * @page_size:      (optional) the flash's page size. Defaults to 256.
  * @addr_nbytes:    number of address bytes to send.
@@ -565,7 +567,7 @@ struct flash_info {
 
 #define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
 	.size = (_sector_size) * (_n_sectors),				\
-	.sector_size = (_sector_size),					\
+	.sector_size = (_sector_size == SZ_64K) ? 0 : (_sector_size),	\
 	.n_banks = (_n_banks)
 
 /* Used when the "_ext_id" is two bytes at most */
diff --git a/drivers/mtd/spi-nor/swp.c b/drivers/mtd/spi-nor/swp.c
index 40bf52867095..585813310ee1 100644
--- a/drivers/mtd/spi-nor/swp.c
+++ b/drivers/mtd/spi-nor/swp.c
@@ -34,7 +34,11 @@ static u8 spi_nor_get_sr_tb_mask(struct spi_nor *nor)
 static u64 spi_nor_get_min_prot_length_sr(struct spi_nor *nor)
 {
 	unsigned int bp_slots, bp_slots_needed;
-	unsigned int sector_size = nor->info->sector_size;
+	/*
+	 * sector_size will eventually be replaced with the max erase size of
+	 * the flash. For now, we need to have that ugly default.
+	 */
+	unsigned int sector_size = nor->info->sector_size ?: SPI_NOR_DEFAULT_SECTOR_SIZE;
 	u64 n_sectors = div_u64(nor->params->size, sector_size);
 	u8 mask = spi_nor_get_sr_bp_mask(nor);
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 11/41] mtd: spi-nor: drop .parse_sfdp

[Michael Walle]

Drop the size parameter to indicate we need to do SFDP, we can do that
because it is guaranteed that the size will be set by SFDP and because
PARSE_SFDP forced the SFDP parsing it must be overwritten.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c       |  3 +--
 drivers/mtd/spi-nor/core.h       | 23 ++++++++++++++++-------
 drivers/mtd/spi-nor/eon.c        |  3 +--
 drivers/mtd/spi-nor/gigadevice.c |  3 +--
 drivers/mtd/spi-nor/issi.c       |  4 +---
 drivers/mtd/spi-nor/macronix.c   |  1 -
 drivers/mtd/spi-nor/spansion.c   | 12 ------------
 drivers/mtd/spi-nor/winbond.c    |  7 ++-----
 8 files changed, 22 insertions(+), 34 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index cf0e25b4f9a9..41612b9f1098 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2016,7 +2016,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
 
 static const struct flash_info spi_nor_generic_flash = {
 	.name = "spi-nor-generic",
-	.parse_sfdp = true,
 };
 
 static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
@@ -3068,7 +3067,7 @@ static int spi_nor_init_params(struct spi_nor *nor)
 
 	spi_nor_init_default_params(nor);
 
-	if (nor->info->parse_sfdp) {
+	if (spi_nor_needs_sfdp(nor)) {
 		ret = spi_nor_parse_sfdp(nor);
 		if (ret) {
 			dev_err(nor->dev, "BFPT parsing failed. Please consider using SPI_NOR_SKIP_SFDP when declaring the flash\n");
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 734aedd4d62c..d9bf7a24ae1f 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -460,9 +460,6 @@ struct spi_nor_fixups {
  * @page_size:      (optional) the flash's page size. Defaults to 256.
  * @addr_nbytes:    number of address bytes to send.
  *
- * @parse_sfdp:     true when flash supports SFDP tables. The false value has no
- *                  meaning. If one wants to skip the SFDP tables, one should
- *                  instead use the SPI_NOR_SKIP_SFDP sfdp_flag.
  * @flags:          flags that indicate support that is not defined by the
  *                  JESD216 standard in its SFDP tables. Flag meanings:
  *   SPI_NOR_HAS_LOCK:        flash supports lock/unlock via SR
@@ -521,7 +518,6 @@ struct flash_info {
 	u8 n_banks;
 	u8 addr_nbytes;
 
-	bool parse_sfdp;
 	u16 flags;
 #define SPI_NOR_HAS_LOCK		BIT(0)
 #define SPI_NOR_HAS_TB			BIT(1)
@@ -598,9 +594,6 @@ struct flash_info {
 			.n_regions = (_n_regions),			\
 		},
 
-#define PARSE_SFDP							\
-	.parse_sfdp = true,						\
-
 #define FLAGS(_flags)							\
 		.flags = (_flags),					\
 
@@ -740,6 +733,22 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
 	return container_of(mtd, struct spi_nor, mtd);
 }
 
+/**
+ * spi_nor_needs_sfdp() - returns true if SFDP parsing is used for this flash.
+ *
+ * Return: true if SFDP parsing is needed
+ */
+static inline bool spi_nor_needs_sfdp(const struct spi_nor *nor)
+{
+	/*
+	 * The flash size is one property parsed by the SFDP. We use it as an
+	 * indicator whether we need SFDP parsing for a particular flash. I.e.
+	 * non-legacy flash entries in flash_info will have a size of zero iff
+	 * SFDP should be used.
+	 */
+	return nor->info->size;
+}
+
 #ifdef CONFIG_DEBUG_FS
 void spi_nor_debugfs_register(struct spi_nor *nor);
 void spi_nor_debugfs_shutdown(void);
diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
index 50a11053711f..434aaf155856 100644
--- a/drivers/mtd/spi-nor/eon.c
+++ b/drivers/mtd/spi-nor/eon.c
@@ -25,8 +25,7 @@ static const struct flash_info eon_nor_parts[] = {
 	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256) },
-	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512)
-		PARSE_SFDP },
+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  0) },
 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128)
 		NO_SFDP_FLAGS(SECT_4K) },
 };
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index d57ddaf1525b..7cf142c75529 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -62,8 +62,7 @@ static const struct flash_info gigadevice_nor_parts[] = {
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
-		PARSE_SFDP
+	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 0)
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &gd25q256_fixups },
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index accdf7aa2bfd..9d22b799ce94 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -62,8 +62,7 @@ static const struct flash_info issi_nor_parts[] = {
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
 	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 512)
-		PARSE_SFDP
+	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 0)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &is25lp256_fixups },
 	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64)
@@ -73,7 +72,6 @@ static const struct flash_info issi_nor_parts[] = {
 	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "is25wp256", INFO(0x9d7019, 0, 0, 0)
-		PARSE_SFDP
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		FLAGS(SPI_NOR_QUAD_PP)
 		.fixups = &is25lp256_fixups },
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index eb149e517c1f..0f3bd3ed8eff 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -83,7 +83,6 @@ static const struct flash_info macronix_nor_parts[] = {
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
 	{ "mx25uw51245g", INFOB(0xc2813a, 0, 0, 0, 4)
-		PARSE_SFDP
 		FLAGS(SPI_NOR_RWW) },
 	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 709822fced86..e6468569f178 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -849,59 +849,47 @@ static const struct flash_info spansion_nor_parts[] = {
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
 	{ "s25fs256t",  INFO6(0x342b19, 0x0f0890, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25fs256t_fixups },
 	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hl02gt",  INFO6(0x342a1c, 0x0f0090, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		FLAGS(NO_CHIP_ERASE)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s25hx_t_fixups },
 	{ "s25hs02gt",  INFO6(0x342b1c, 0x0f0090, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		FLAGS(NO_CHIP_ERASE)
 		.fixups = &s25hx_t_fixups },
 	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
 		FLAGS(SPI_NOR_NO_ERASE) },
 	{ "s28hl512t",   INFO(0x345a1a,      0, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 	{ "s28hl01gt",   INFO(0x345a1b,      0, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 	{ "s28hs512t",   INFO(0x345b1a,      0, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 	{ "s28hs01gt",   INFO(0x345b1b,      0, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
 	{ "s28hs02gt",   INFO(0x345b1c,      0, 0, 0)
-		PARSE_SFDP
 		MFR_FLAGS(USE_CLPEF)
 		.fixups = &s28hx_t_fixups,
 	},
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index cd99c9a1c568..c21fed842762 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -126,8 +126,7 @@ static const struct flash_info winbond_nor_parts[] = {
 	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		.fixups = &w25q256_fixups },
-	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
-		PARSE_SFDP },
+	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 0) },
 	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
@@ -135,10 +134,8 @@ static const struct flash_info winbond_nor_parts[] = {
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ |
 			      SPI_NOR_DUAL_READ) },
 	{ "w25q512nwq", INFO(0xef6020, 0, 0, 0)
-		PARSE_SFDP
 		OTP_INFO(256, 3, 0x1000, 0x1000) },
-	{ "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 1024)
-		PARSE_SFDP
+	{ "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
 		OTP_INFO(256, 3, 0x1000, 0x1000) },
 	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 12/41] mtd: spi-nor: introduce (temporary) INFO0()

[Michael Walle]

The id will be converted to an own structure. To differentiate between
flashes with and without IDs, introduce a temporary macro INFO0() and
convert all flashes with no ID to use it. After the flash_info
conversion, that macro will be removed along with all the other INFOx()
macros.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.h      |  3 +++
 drivers/mtd/spi-nor/issi.c      |  4 ++--
 drivers/mtd/spi-nor/micron-st.c | 18 +++++++++---------
 3 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index d9bf7a24ae1f..eec14733c233 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -571,6 +571,9 @@ struct flash_info {
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
 	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
 
+#define INFO0(_sector_size, _n_sectors)					\
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
+
 #define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
 	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), (_n_banks)),
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 9d22b799ce94..b936a28a85df 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -77,11 +77,11 @@ static const struct flash_info issi_nor_parts[] = {
 		.fixups = &is25lp256_fixups },
 
 	/* PMC */
-	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2)
+	{ "pm25lv512",   INFO0(32 * 1024,    2)
 		NO_SFDP_FLAGS(SECT_4K)
 		.fixups = &pm25lv_nor_fixups
 	},
-	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4)
+	{ "pm25lv010",   INFO0(32 * 1024,    4)
 		NO_SFDP_FLAGS(SECT_4K)
 		.fixups = &pm25lv_nor_fixups
 	},
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 6ad080c52ab5..5406a3af2ce0 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -272,15 +272,15 @@ static const struct flash_info st_nor_parts[] = {
 	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128) },
 	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64) },
 
-	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2) },
-	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4) },
-	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4) },
-	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8) },
-	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16) },
-	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32) },
-	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64) },
-	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128) },
-	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64) },
+	{ "m25p05-nonjedec",  INFO0( 32 * 1024,   2) },
+	{ "m25p10-nonjedec",  INFO0( 32 * 1024,   4) },
+	{ "m25p20-nonjedec",  INFO0( 64 * 1024,   4) },
+	{ "m25p40-nonjedec",  INFO0( 64 * 1024,   8) },
+	{ "m25p80-nonjedec",  INFO0( 64 * 1024,  16) },
+	{ "m25p16-nonjedec",  INFO0( 64 * 1024,  32) },
+	{ "m25p32-nonjedec",  INFO0( 64 * 1024,  64) },
+	{ "m25p64-nonjedec",  INFO0( 64 * 1024, 128) },
+	{ "m25p128-nonjedec", INFO0(256 * 1024,  64) },
 
 	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2) },
 	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16) },

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 13/41] mtd: spi-nor: move the .id and .id_len into an own structure

[Michael Walle]

Create a new structure to hold a flash ID and its length. The goal is to
have a new macro SNOR_ID() which can have a flexible id length. This way
we can get rid of all the individual INFOx() macros.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c      |  6 +++---
 drivers/mtd/spi-nor/core.h      | 33 ++++++++++++++++++++++++---------
 drivers/mtd/spi-nor/micron-st.c |  4 ++--
 drivers/mtd/spi-nor/spansion.c  |  4 ++--
 drivers/mtd/spi-nor/sysfs.c     |  6 +++---
 drivers/mtd/spi-nor/winbond.c   |  1 -
 6 files changed, 34 insertions(+), 20 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 41612b9f1098..1319fcb97e16 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2027,8 +2027,8 @@ static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
 	for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
 		for (j = 0; j < manufacturers[i]->nparts; j++) {
 			part = &manufacturers[i]->parts[j];
-			if (part->id_len &&
-			    !memcmp(part->id, id, part->id_len)) {
+			if (part->id &&
+			    !memcmp(part->id->bytes, id, part->id->len)) {
 				nor->manufacturer = manufacturers[i];
 				return part;
 			}
@@ -3369,7 +3369,7 @@ static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
 	 * If caller has specified name of flash model that can normally be
 	 * detected using JEDEC, let's verify it.
 	 */
-	if (name && info->id_len) {
+	if (name && info->id) {
 		const struct flash_info *jinfo;
 
 		jinfo = spi_nor_detect(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index eec14733c233..57272bb51eff 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -446,12 +446,22 @@ struct spi_nor_fixups {
 	int (*late_init)(struct spi_nor *nor);
 };
 
+/**
+ * struct spi_nor_id - SPI NOR flash ID.
+ *
+ * @bytes: the flash's ID bytes. The first three bytes are the JEDIC ID.
+ * @len:   the number of bytes of ID.
+ */
+struct spi_nor_id {
+	const u8 *bytes;
+	u8 len;
+};
+
 /**
  * struct flash_info - SPI NOR flash_info entry.
+ * @id:   pointer to struct spi_nor_id or NULL, which means "no ID" (mostly
+ *        older chips).
  * @name: the name of the flash.
- * @id:             the flash's ID bytes. The first three bytes are the
- *                  JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips).
- * @id_len:         the number of bytes of ID.
  * @size:           the size of the flash in bytes.
  * @sector_size:    (optional) the size listed here is what works with
  *                  SPINOR_OP_SE, which isn't necessarily called a "sector" by
@@ -510,8 +520,7 @@ struct spi_nor_fixups {
  */
 struct flash_info {
 	char *name;
-	u8 id[SPI_NOR_MAX_ID_LEN];
-	u8 id_len;
+	const struct spi_nor_id *id;
 	size_t size;
 	unsigned sector_size;
 	u16 page_size;
@@ -554,12 +563,18 @@ struct flash_info {
 #define SPI_NOR_ID_3ITEMS(_id) ((_id) >> 16) & 0xff, SPI_NOR_ID_2ITEMS(_id)
 
 #define SPI_NOR_ID(_jedec_id, _ext_id)					\
-	.id = { SPI_NOR_ID_3ITEMS(_jedec_id), SPI_NOR_ID_2ITEMS(_ext_id) }, \
-	.id_len = !(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))
+	.id = &(const struct spi_nor_id){				\
+		.bytes = (const u8[]){ SPI_NOR_ID_3ITEMS(_jedec_id),	\
+				       SPI_NOR_ID_2ITEMS(_ext_id) },	\
+		.len = !(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0)),	\
+	}
 
 #define SPI_NOR_ID6(_jedec_id, _ext_id)					\
-	.id = { SPI_NOR_ID_3ITEMS(_jedec_id), SPI_NOR_ID_3ITEMS(_ext_id) }, \
-	.id_len = 6
+	.id = &(const struct spi_nor_id){				\
+		.bytes = (const u8[]){ SPI_NOR_ID_3ITEMS(_jedec_id),	\
+				       SPI_NOR_ID_3ITEMS(_ext_id) },	\
+		.len = 6,						\
+	}
 
 #define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
 	.size = (_sector_size) * (_n_sectors),				\
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 5406a3af2ce0..229c951efcce 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -78,7 +78,7 @@ static int micron_st_nor_octal_dtr_en(struct spi_nor *nor)
 		return ret;
 	}
 
-	if (memcmp(buf, nor->info->id, nor->info->id_len))
+	if (memcmp(buf, nor->info->id->bytes, nor->info->id->len))
 		return -EINVAL;
 
 	return 0;
@@ -114,7 +114,7 @@ static int micron_st_nor_octal_dtr_dis(struct spi_nor *nor)
 		return ret;
 	}
 
-	if (memcmp(buf, nor->info->id, nor->info->id_len))
+	if (memcmp(buf, nor->info->id->bytes, nor->info->id->len))
 		return -EINVAL;
 
 	return 0;
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index e6468569f178..d7012ab3de2c 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -228,7 +228,7 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 		return ret;
 	}
 
-	if (memcmp(buf, nor->info->id, nor->info->id_len))
+	if (memcmp(buf, nor->info->id->bytes, nor->info->id->len))
 		return -EINVAL;
 
 	return 0;
@@ -272,7 +272,7 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 		return ret;
 	}
 
-	if (memcmp(buf, nor->info->id, nor->info->id_len))
+	if (memcmp(buf, nor->info->id->bytes, nor->info->id->len))
 		return -EINVAL;
 
 	return 0;
diff --git a/drivers/mtd/spi-nor/sysfs.c b/drivers/mtd/spi-nor/sysfs.c
index c09bb832b3b9..2dfdc555a69f 100644
--- a/drivers/mtd/spi-nor/sysfs.c
+++ b/drivers/mtd/spi-nor/sysfs.c
@@ -35,8 +35,8 @@ static ssize_t jedec_id_show(struct device *dev,
 	struct spi_device *spi = to_spi_device(dev);
 	struct spi_mem *spimem = spi_get_drvdata(spi);
 	struct spi_nor *nor = spi_mem_get_drvdata(spimem);
-	const u8 *id = nor->info->id_len ? nor->info->id : nor->id;
-	u8 id_len = nor->info->id_len ?: SPI_NOR_MAX_ID_LEN;
+	const u8 *id = nor->info->id ? nor->info->id->bytes : nor->id;
+	u8 id_len = nor->info->id ? nor->info->id->len : SPI_NOR_MAX_ID_LEN;
 
 	return sysfs_emit(buf, "%*phN\n", id_len, id);
 }
@@ -78,7 +78,7 @@ static umode_t spi_nor_sysfs_is_visible(struct kobject *kobj,
 
 	if (attr == &dev_attr_manufacturer.attr && !nor->manufacturer)
 		return 0;
-	if (attr == &dev_attr_jedec_id.attr && !nor->info->id_len && !nor->id)
+	if (attr == &dev_attr_jedec_id.attr && !nor->info->id && !nor->id)
 		return 0;
 
 	return 0444;
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index c21fed842762..7873cc394f07 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -121,7 +121,6 @@ static const struct flash_info winbond_nor_parts[] = {
 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16)
 		NO_SFDP_FLAGS(SECT_4K) },
 	{ "w25q128", INFO(0xef4018, 0, 0, 0)
-		PARSE_SFDP
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
 	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 14/41] mtd: spi-nor: rename .otp_org to .otp and make it a pointer

[Michael Walle]

Move the OTP ops out of the flash_info structure. Besides of saving some
space, there will be a new macro SNOR_OTP() which can be used to set the
ops:
  .otp = SNOR_OTP(...),

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.c | 2 +-
 drivers/mtd/spi-nor/core.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 1319fcb97e16..06b34d9ad8a1 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2977,7 +2977,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
 	struct device_node *np = spi_nor_get_flash_node(nor);
 
 	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
-	params->otp.org = &info->otp_org;
+	params->otp.org = info->otp;
 
 	/* Default to 16-bit Write Status (01h) Command */
 	nor->flags |= SNOR_F_HAS_16BIT_SR;
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 57272bb51eff..e26a17d11c14 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -555,7 +555,7 @@ struct flash_info {
 
 	u8 mfr_flags;
 
-	const struct spi_nor_otp_organization otp_org;
+	const struct spi_nor_otp_organization *otp;
 	const struct spi_nor_fixups *fixups;
 };
 
@@ -605,7 +605,7 @@ struct flash_info {
 		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
 #define OTP_INFO(_len, _n_regions, _base, _offset)			\
-		.otp_org = {						\
+		.otp = &(const struct spi_nor_otp_organization){	\
 			.len = (_len),					\
 			.base = (_base),				\
 			.offset = (_offset),				\

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 15/41] mtd: spi-nor: add SNOR_ID() and SNOR_OTP()

[Michael Walle]

After all the preparation, it is now time to introduce the new macros to
specify flashes in our database: SNOR_ID() and SNOR_OTP(). An flash_info
entry might now look like:
    {
        .id = SNOR_ID(0xef, 0x60, 0x16),
        .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
        .flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
    }

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index e26a17d11c14..d0e83bfb847c 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -559,6 +559,20 @@ struct flash_info {
 	const struct spi_nor_fixups *fixups;
 };
 
+#define SNOR_ID(...)							\
+	(&(const struct spi_nor_id){					\
+		.bytes = (const u8[]){ __VA_ARGS__ },			\
+		.len = sizeof((u8[]){ __VA_ARGS__ }),			\
+	})
+
+#define SNOR_OTP(_len, _n_regions, _base, _offset)			\
+	(&(const struct spi_nor_otp_organization){			\
+		.len = (_len),						\
+		.base = (_base),					\
+		.offset = (_offset),					\
+		.n_regions = (_n_regions),				\
+	})
+
 #define SPI_NOR_ID_2ITEMS(_id) ((_id) >> 8) & 0xff, (_id) & 0xff
 #define SPI_NOR_ID_3ITEMS(_id) ((_id) >> 16) & 0xff, SPI_NOR_ID_2ITEMS(_id)
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 16/41] mtd: spi-nor: remove or move flash_info comments

[Michael Walle]

Most of the comments are a relict of the past when the flash_info was
just one table. Most of them are useless. Remove them.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/atmel.c    | 1 -
 drivers/mtd/spi-nor/eon.c      | 1 -
 drivers/mtd/spi-nor/esmt.c     | 1 -
 drivers/mtd/spi-nor/everspin.c | 1 -
 drivers/mtd/spi-nor/intel.c    | 1 -
 drivers/mtd/spi-nor/issi.c     | 2 --
 drivers/mtd/spi-nor/macronix.c | 1 -
 drivers/mtd/spi-nor/spansion.c | 3 ---
 drivers/mtd/spi-nor/sst.c      | 1 -
 drivers/mtd/spi-nor/winbond.c  | 1 -
 drivers/mtd/spi-nor/xmc.c      | 2 +-
 11 files changed, 1 insertion(+), 14 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index 58968c1e7d2f..d2de2cb0c066 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -163,7 +163,6 @@ static const struct spi_nor_fixups atmel_nor_global_protection_fixups = {
 };
 
 static const struct flash_info atmel_nor_parts[] = {
-	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
 	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4)
 		FLAGS(SPI_NOR_HAS_LOCK)
 		NO_SFDP_FLAGS(SECT_4K)
diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
index 434aaf155856..4848ffe8b38f 100644
--- a/drivers/mtd/spi-nor/eon.c
+++ b/drivers/mtd/spi-nor/eon.c
@@ -9,7 +9,6 @@
 #include "core.h"
 
 static const struct flash_info eon_nor_parts[] = {
-	/* EON -- en25xxx */
 	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64)
 		NO_SFDP_FLAGS(SECT_4K) },
 	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64) },
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index fcc3b0e7cda9..12779bec5f99 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -9,7 +9,6 @@
 #include "core.h"
 
 static const struct flash_info esmt_nor_parts[] = {
-	/* ESMT */
 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
 		NO_SFDP_FLAGS(SECT_4K) },
diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
index 84a07c2e0536..d02c32f2f7ad 100644
--- a/drivers/mtd/spi-nor/everspin.c
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -9,7 +9,6 @@
 #include "core.h"
 
 static const struct flash_info everspin_nor_parts[] = {
-	/* Everspin */
 	{ "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2) },
 	{ "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2) },
 	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3) },
diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
index 9179f2d09cba..aba62759a02e 100644
--- a/drivers/mtd/spi-nor/intel.c
+++ b/drivers/mtd/spi-nor/intel.c
@@ -9,7 +9,6 @@
 #include "core.h"
 
 static const struct flash_info intel_nor_parts[] = {
-	/* Intel/Numonyx -- xxxs33b */
 	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32)
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64)
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index b936a28a85df..d31401bcab64 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -47,7 +47,6 @@ static const struct spi_nor_fixups pm25lv_nor_fixups = {
 };
 
 static const struct flash_info issi_nor_parts[] = {
-	/* ISSI */
 	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2)
 		NO_SFDP_FLAGS(SECT_4K) },
 	{ "is25lq040b", INFO(0x9d4013, 0, 64 * 1024,   8)
@@ -76,7 +75,6 @@ static const struct flash_info issi_nor_parts[] = {
 		FLAGS(SPI_NOR_QUAD_PP)
 		.fixups = &is25lp256_fixups },
 
-	/* PMC */
 	{ "pm25lv512",   INFO0(32 * 1024,    2)
 		NO_SFDP_FLAGS(SECT_4K)
 		.fixups = &pm25lv_nor_fixups
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 0f3bd3ed8eff..b21e688fe056 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -33,7 +33,6 @@ static const struct spi_nor_fixups mx25l25635_fixups = {
 };
 
 static const struct flash_info macronix_nor_parts[] = {
-	/* Macronix */
 	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1)
 		NO_SFDP_FLAGS(SECT_4K) },
 	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index d7012ab3de2c..1a1d2368c462 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -756,9 +756,6 @@ static const struct spi_nor_fixups s25fs_s_nor_fixups = {
 };
 
 static const struct flash_info spansion_nor_parts[] = {
-	/* Spansion/Cypress -- single (large) sector size only, at least
-	 * for the chips listed here (without boot sectors).
-	 */
 	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64)
 		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128)
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 09fdc7023e09..42e29441a7f7 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -61,7 +61,6 @@ static const struct spi_nor_fixups sst26vf_nor_fixups = {
 };
 
 static const struct flash_info sst_nor_parts[] = {
-	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
 	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8)
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
 		NO_SFDP_FLAGS(SECT_4K)
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 7873cc394f07..2d3ae972b419 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -42,7 +42,6 @@ static const struct spi_nor_fixups w25q256_fixups = {
 };
 
 static const struct flash_info winbond_nor_parts[] = {
-	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
 	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1)
 		NO_SFDP_FLAGS(SECT_4K) },
 	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2)
diff --git a/drivers/mtd/spi-nor/xmc.c b/drivers/mtd/spi-nor/xmc.c
index 051411e86339..48062ccb22fa 100644
--- a/drivers/mtd/spi-nor/xmc.c
+++ b/drivers/mtd/spi-nor/xmc.c
@@ -9,7 +9,6 @@
 #include "core.h"
 
 static const struct flash_info xmc_nor_parts[] = {
-	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
 	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
@@ -18,6 +17,7 @@ static const struct flash_info xmc_nor_parts[] = {
 			      SPI_NOR_QUAD_READ) },
 };
 
+/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
 const struct spi_nor_manufacturer spi_nor_xmc = {
 	.name = "xmc",
 	.parts = xmc_nor_parts,

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 17/41] mtd: spi-nor: atmel: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/atmel.c | 122 +++++++++++++++++++++++++++++---------------
 1 file changed, 80 insertions(+), 42 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index d2de2cb0c066..ccc985c48ae3 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -163,48 +163,86 @@ static const struct spi_nor_fixups atmel_nor_global_protection_fixups = {
 };
 
 static const struct flash_info atmel_nor_parts[] = {
-	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4)
-		FLAGS(SPI_NOR_HAS_LOCK)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &at25fs_nor_fixups },
-	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8)
-		FLAGS(SPI_NOR_HAS_LOCK)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &at25fs_nor_fixups },
-	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &atmel_nor_global_protection_fixups },
-	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &atmel_nor_global_protection_fixups },
-	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &atmel_nor_global_protection_fixups },
-	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &atmel_nor_global_protection_fixups },
-	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &atmel_nor_global_protection_fixups },
-	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &atmel_nor_global_protection_fixups },
-	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		.fixups = &atmel_nor_global_protection_fixups },
-	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16)
-		NO_SFDP_FLAGS(SECT_4K) },
+	{
+		.id = SNOR_ID(0x1f, 0x66, 0x01),
+		.name = "at25fs010",
+		.sector_size = SZ_32K,
+		.size = SZ_128K,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &at25fs_nor_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x66, 0x04),
+		.name = "at25fs040",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &at25fs_nor_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x44, 0x01),
+		.name = "at25df041a",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &atmel_nor_global_protection_fixups,
+	}, {
+		.id = SNOR_ID(0x1f, 0x47, 0x00),
+		.name = "at25df321",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &atmel_nor_global_protection_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x47, 0x01),
+		.name = "at25df321a",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &atmel_nor_global_protection_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x48, 0x00),
+		.name = "at25df641",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &atmel_nor_global_protection_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x42, 0x16),
+		.name = "at25sl321",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x1f, 0x04, 0x00),
+		.name = "at26f004",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x1f, 0x45, 0x01),
+		.name = "at26df081a",
+		.size = SZ_1M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &atmel_nor_global_protection_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x46, 0x01),
+		.name = "at26df161a",
+		.size = SZ_2M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &atmel_nor_global_protection_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x47, 0x00),
+		.name = "at26df321",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &atmel_nor_global_protection_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x25, 0x00),
+		.name = "at45db081d",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K,
+	},
 };
 
 const struct spi_nor_manufacturer spi_nor_atmel = {

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 18/41] mtd: spi-nor: eon: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/eon.c | 72 +++++++++++++++++++++++++++++++++++------------
 1 file changed, 54 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
index 4848ffe8b38f..ba09cb6c2abd 100644
--- a/drivers/mtd/spi-nor/eon.c
+++ b/drivers/mtd/spi-nor/eon.c
@@ -9,24 +9,60 @@
 #include "core.h"
 
 static const struct flash_info eon_nor_parts[] = {
-	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64) },
-	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64) },
-	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128) },
-	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64) },
-	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256) },
-	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  0) },
-	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128)
-		NO_SFDP_FLAGS(SECT_4K) },
+	{
+		.id = SNOR_ID(0x1c, 0x31, 0x16),
+		.name = "en25f32",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x1c, 0x20, 0x16),
+		.name = "en25p32",
+		.size = SZ_4M,
+	}, {
+		.id = SNOR_ID(0x1c, 0x30, 0x16),
+		.name = "en25q32b",
+		.size = SZ_4M,
+	}, {
+		.id = SNOR_ID(0x1c, 0x20, 0x17),
+		.name = "en25p64",
+		.size = SZ_8M,
+	}, {
+		.id = SNOR_ID(0x1c, 0x30, 0x17),
+		.name = "en25q64",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x1c, 0x30, 0x14),
+		.name = "en25q80a",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x1c, 0x70, 0x15),
+		.name = "en25qh16",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x1c, 0x70, 0x16),
+		.name = "en25qh32",
+		.size = SZ_4M,
+	}, {
+		.id = SNOR_ID(0x1c, 0x70, 0x17),
+		.name = "en25qh64",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x1c, 0x70, 0x18),
+		.name = "en25qh128",
+		.size = SZ_16M,
+	}, {
+		.id = SNOR_ID(0x1c, 0x70, 0x19),
+		.name = "en25qh256",
+	}, {
+		.name = "en25s64",
+		.id = SNOR_ID(0x1c, 0x38, 0x17),
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
+	},
 };
 
 const struct spi_nor_manufacturer spi_nor_eon = {

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 19/41] mtd: spi-nor: esmt: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/esmt.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index 12779bec5f99..089fcd1aa794 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -9,15 +9,25 @@
 #include "core.h"
 
 static const struct flash_info esmt_nor_parts[] = {
-	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "f25l32qa-2s", INFO(0x8c4116, 0, 64 * 1024, 64)
-		FLAGS(SPI_NOR_HAS_LOCK)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK)
-		NO_SFDP_FLAGS(SECT_4K) },
+	{
+		.id = SNOR_ID(0x8c, 0x20, 0x16),
+		.name = "f25l32pa",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x8c, 0x41, 0x16),
+		.name = "f25l32qa-2s",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x8c, 0x41, 0x17),
+		.name = "f25l64qa",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SECT_4K,
+	}
 };
 
 const struct spi_nor_manufacturer spi_nor_esmt = {

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 20/41] mtd: spi-nor: everspin: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/everspin.c | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
index d02c32f2f7ad..46776bc10b27 100644
--- a/drivers/mtd/spi-nor/everspin.c
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -9,10 +9,35 @@
 #include "core.h"
 
 static const struct flash_info everspin_nor_parts[] = {
-	{ "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2) },
-	{ "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2) },
-	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3) },
-	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3) },
+	{
+		.name = "mr25h128",
+		.size = SZ_16K,
+		.sector_size = SZ_16K,
+		.page_size = 256,
+		.addr_nbytes = 2,
+		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
+	}, {
+		.name = "mr25h256",
+		.size = SZ_32K,
+		.sector_size = SZ_32K,
+		.page_size = 256,
+		.addr_nbytes = 2,
+		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
+	}, {
+		.name = "mr25h10",
+		.size = SZ_128K,
+		.sector_size = SZ_128K,
+		.page_size = 256,
+		.addr_nbytes = 3,
+		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
+	}, {
+		.name = "mr25h40",
+		.size = SZ_512K,
+		.sector_size = SZ_512K,
+		.page_size = 256,
+		.addr_nbytes = 3,
+		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
+	}
 };
 
 const struct spi_nor_manufacturer spi_nor_everspin = {

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 21/41] mtd: spi-nor: gigadevice: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/gigadevice.c | 81 ++++++++++++++++++++++++----------------
 1 file changed, 49 insertions(+), 32 deletions(-)

diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 7cf142c75529..0d22cd99715b 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -34,38 +34,55 @@ static const struct spi_nor_fixups gd25q256_fixups = {
 };
 
 static const struct flash_info gigadevice_nor_parts[] = {
-	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 0)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		.fixups = &gd25q256_fixups },
+	{
+		.id = SNOR_ID(0xc8, 0x40, 0x15),
+		.name = "gd25q16",
+		.size = SZ_2M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x40, 0x16),
+		.name = "gd25q32",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x60, 0x16),
+		.name = "gd25lq32",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x40, 0x17),
+		.name = "gd25q64",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x60, 0x17),
+		.name = "gd25lq64c",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x60, 0x18),
+		.name = "gd25lq128d",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x40, 0x18),
+		.name = "gd25q128",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x40, 0x19),
+		.name = "gd25q256",
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6,
+		.fixups = &gd25q256_fixups,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	},
 };
 
 const struct spi_nor_manufacturer spi_nor_gigadevice = {

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 22/41] mtd: spi-nor: intel: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/intel.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
index aba62759a02e..f647359fee7a 100644
--- a/drivers/mtd/spi-nor/intel.c
+++ b/drivers/mtd/spi-nor/intel.c
@@ -9,12 +9,22 @@
 #include "core.h"
 
 static const struct flash_info intel_nor_parts[] = {
-	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
-	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
-	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{
+		.id = SNOR_ID(0x89, 0x89, 0x11),
+		.name = "160s33b",
+		.size = SZ_2M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+	}, {
+		.id = SNOR_ID(0x89, 0x89, 0x12),
+		.name = "320s33b",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+	}, {
+		.id = SNOR_ID(0x89, 0x89, 0x13),
+		.name = "640s33b",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+	}
 };
 
 const struct spi_nor_manufacturer spi_nor_intel = {

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 23/41] mtd: spi-nor: issi: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/issi.c | 114 +++++++++++++++++++++++++++++++--------------
 1 file changed, 78 insertions(+), 36 deletions(-)

diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index d31401bcab64..9478f1e61626 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -47,44 +47,86 @@ static const struct spi_nor_fixups pm25lv_nor_fixups = {
 };
 
 static const struct flash_info issi_nor_parts[] = {
-	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "is25lq040b", INFO(0x9d4013, 0, 64 * 1024,   8)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp016d", INFO(0x9d6015, 0, 64 * 1024,  32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp080d", INFO(0x9d6014, 0, 64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp032",  INFO(0x9d6016, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp064",  INFO(0x9d6017, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 0)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		.fixups = &is25lp256_fixups },
-	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp064",  INFO(0x9d7017, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp256", INFO(0x9d7019, 0, 0, 0)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		FLAGS(SPI_NOR_QUAD_PP)
-		.fixups = &is25lp256_fixups },
-
-	{ "pm25lv512",   INFO0(32 * 1024,    2)
-		NO_SFDP_FLAGS(SECT_4K)
+	{
+		.id = SNOR_ID(0x7f, 0x9d, 0x20),
+		.name = "is25cd512",
+		.sector_size = SZ_32K,
+		.size = SZ_64K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x9d, 0x40, 0x13),
+		.name = "is25lq040b",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x60, 0x15),
+		.name = "is25lp016d",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x60, 0x14),
+		.name = "is25lp080d",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x60, 0x16),
+		.name = "is25lp032",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x60, 0x17),
+		.name = "is25lp064",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x60, 0x18),
+		.name = "is25lp128",
+		.size = SZ_16M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x60, 0x19),
+		.name = "is25lp256",
+		.fixups = &is25lp256_fixups,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0x9d, 0x70, 0x16),
+		.name = "is25wp032",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x70, 0x17),
+		.size = SZ_8M,
+		.name = "is25wp064",
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x70, 0x18),
+		.name = "is25wp128",
+		.size = SZ_16M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x70, 0x19),
+		.name = "is25wp256",
+		.flags = SPI_NOR_QUAD_PP,
+		.fixups = &is25lp256_fixups,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.name = "pm25lv512",
+		.sector_size = SZ_32K,
+		.size = SZ_64K,
+		.no_sfdp_flags = SECT_4K,
 		.fixups = &pm25lv_nor_fixups
-	},
-	{ "pm25lv010",   INFO0(32 * 1024,    4)
-		NO_SFDP_FLAGS(SECT_4K)
+	}, {
+		.name = "pm25lv010",
+		.sector_size = SZ_32K,
+		.size = SZ_128K,
+		.no_sfdp_flags = SECT_4K,
 		.fixups = &pm25lv_nor_fixups
-	},
-	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64)
-		NO_SFDP_FLAGS(SECT_4K) },
+	}, {
+		.id = SNOR_ID(0x7f, 0x9d, 0x46),
+		.name = "pm25lq032",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}
 };
 
 static void issi_nor_default_init(struct spi_nor *nor)

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 24/41] mtd: spi-nor: macronix: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/macronix.c | 218 ++++++++++++++++++++++++++++-------------
 1 file changed, 150 insertions(+), 68 deletions(-)

diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index b21e688fe056..0508a207e9df 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -33,74 +33,156 @@ static const struct spi_nor_fixups mx25l25635_fixups = {
 };
 
 static const struct flash_info macronix_nor_parts[] = {
-	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16) },
-	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256) },
-	{ "mx25r1635f",  INFO(0xc22815, 0, 64 * 1024,  32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		.fixups = &mx25l25635_fixups },
-	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
-	{ "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
-	{ "mx25uw51245g", INFOB(0xc2813a, 0, 0, 0, 4)
-		FLAGS(SPI_NOR_RWW) },
-	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512) },
-	{ "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
-	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
-	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048)
-		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
-	{ "mx66u2g45g",	 INFO(0xc2253c, 0, 64 * 1024, 4096)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{
+		.id = SNOR_ID(0xc2, 0x20, 0x10),
+		.name = "mx25l512e",
+		.size = SZ_64K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x12),
+		.name = "mx25l2005a",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x13),
+		.name = "mx25l4005a",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x14),
+		.name = "mx25l8005",
+		.size = SZ_1M,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x15),
+		.name = "mx25l1606e",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x16),
+		.name = "mx25l3205d",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x9e, 0x16),
+		.name = "mx25l3255e",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x17),
+		.name = "mx25l6405d",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x32),
+		.name = "mx25u2033e",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x36),
+		.name = "mx25u3235f",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x33),
+		.name = "mx25u4035",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x34),
+		.name = "mx25u8035",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x37),
+		.name = "mx25u6435f",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x18),
+		.name = "mx25l12805d",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x26, 0x18),
+		.name = "mx25l12855e",
+		.size = SZ_16M,
+	}, {
+		.id = SNOR_ID(0xc2, 0x28, 0x15),
+		.name = "mx25r1635f",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x28, 0x16),
+		.name = "mx25r3235f",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x38),
+		.name = "mx25u12835f",
+		.size = SZ_16M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x19),
+		.name = "mx25l25635e",
+		.size = SZ_32M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixups = &mx25l25635_fixups
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x39),
+		.name = "mx25u25635f",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K,
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x3a),
+		.name = "mx25u51245g",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0xc2, 0x81, 0x3a),
+		.name = "mx25uw51245g",
+		.n_banks = 4,
+		.flags = SPI_NOR_RWW,
+	}, {
+		.id = SNOR_ID(0xc2, 0x23, 0x14),
+		.name = "mx25v8035f",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x26, 0x19),
+		.name = "mx25l25655e",
+		.size = SZ_32M,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x1a),
+		.name = "mx66l51235f",
+		.size = SZ_64M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x3a),
+		.name = "mx66u51235f",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x1b),
+		.name = "mx66l1g45g",
+		.size = SZ_128M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x26, 0x1b),
+		.name = "mx66l1g55g",
+		.size = SZ_128M,
+		.no_sfdp_flags = SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x3c),
+		.name = "mx66u2g45g",
+		.size = SZ_256M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	},
 };
 
 static void macronix_nor_default_init(struct spi_nor *nor)

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 25/41] mtd: spi-nor: micron-st: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/micron-st.c | 405 ++++++++++++++++++++++++++--------------
 1 file changed, 268 insertions(+), 137 deletions(-)

diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 229c951efcce..720fd2fbd0ad 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -159,148 +159,279 @@ static const struct spi_nor_fixups mt35xu512aba_fixups = {
 };
 
 static const struct flash_info micron_nor_parts[] = {
-	{ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ |
-			   SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE)
-		MFR_FLAGS(USE_FSR)
-		.fixups = &mt35xu512aba_fixups
-	},
-	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		MFR_FLAGS(USE_FSR)
+	{
+		.id = SNOR_ID(0x2c, 0x5b, 0x1a),
+		.name = "mt35xu512aba",
+		.sector_size = SZ_128K,
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_OCTAL_READ |
+				 SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP,
+		.mfr_flags = USE_FSR,
+		.fixup_flags = SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE,
+		.fixups = &mt35xu512aba_fixups,
+	}, {
+		.id = SNOR_ID(0x2c, 0x5b, 0x1c),
+		.name = "mt35xu02g",
+		.sector_size = SZ_128K,
+		.size = SZ_256M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_OCTAL_READ,
+		.mfr_flags = USE_FSR,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
 	},
 };
 
 static const struct flash_info st_nor_parts[] = {
-	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64)
-		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
-	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64)
-		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
-	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-		      SPI_NOR_BP3_SR_BIT6)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-		      SPI_NOR_BP3_SR_BIT6)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-		      SPI_NOR_BP3_SR_BIT6)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "mt25ql512a",  INFO6(0x20ba20, 0x104400, 64 * 1024, 1024)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-		      SPI_NOR_BP3_SR_BIT6)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
+	{
+		.id = SNOR_ID(0x20, 0xbb, 0x15),
+		.name = "n25q016a",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x16),
+		.name = "n25q032",
+		.size = SZ_4M,
+		.no_sfdp_flags = SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x16),
+		.name = "n25q032a",
+		.size = SZ_4M,
+		.no_sfdp_flags = SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x17),
+		.name = "n25q064",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x17),
+		.name = "n25q064a",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x18),
+		.name = "n25q128a11",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x18),
+		.name = "n25q128a13",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x19, 0x10, 0x44, 0x00),
+		.name = "mt25ql256a",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x19),
+		.name = "n25q256a",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x19, 0x10, 0x44, 0x00),
+		.name = "mt25qu256a",
+		.size = SZ_32M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x19),
+		.name = "n25q256ax1",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x20, 0x10, 0x44, 0x00),
+		.name = "mt25ql512a",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x20),
+		.name = "n25q512ax3",
+		.size = SZ_64M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x20, 0x10, 0x44, 0x00),
+		.name = "mt25qu512a",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x20),
+		.name = "n25q512a",
+		.size = SZ_64M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x21),
+		.name = "n25q00",
+		.size = SZ_128M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6 | NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x21),
+		.name = "n25q00a",
+		.size = SZ_128M,
+		.flags = NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x22),
+		.name = "mt25ql02g",
+		.size = SZ_256M,
+		.flags = NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x22),
+		.name = "mt25qu02g",
+		.size = SZ_256M,
+		.flags = NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x10),
+		.name = "m25p05",
+		.sector_size = SZ_32K,
+		.size = SZ_64K,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x11),
+		.name = "m25p10",
+		.sector_size = SZ_32K,
+		.size = SZ_128K,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x12),
+		.name = "m25p20",
+		.size = SZ_256K,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x13),
+		.name = "m25p40",
+		.size = SZ_512K,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x14),
+		.name = "m25p80",
+		.size = SZ_1M,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x15),
+		.name = "m25p16",
+		.size = SZ_2M,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x16),
+		.name = "m25p32",
+		.size = SZ_4M,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x17),
+		.name = "m25p64",
+		.size = SZ_8M,
+	}, {
+		.id = SNOR_ID(0x20, 0x20, 0x18),
+		.name = "m25p128",
+		.sector_size = SZ_256K,
+		.size = SZ_16M,
+	}, {
+		.name = "m25p05-nonjedec",
+		.sector_size = SZ_32K,
+		.size = SZ_64K,
+	}, {
+		.name = "m25p10-nonjedec",
+		.sector_size = SZ_32K,
+		.size = SZ_128K,
+	}, {
+		.name = "m25p20-nonjedec",
+		.size = SZ_256K,
+	}, {
+		.name = "m25p40-nonjedec",
+		.size = SZ_512K,
+	}, {
+		.name = "m25p80-nonjedec",
+		.size = SZ_1M,
+	}, {
+		.name = "m25p16-nonjedec",
+		.size = SZ_2M,
+	}, {
+		.name = "m25p32-nonjedec",
+		.size = SZ_4M,
+	}, {
+		.name = "m25p64-nonjedec",
+		.size = SZ_8M,
+	}, {
+		.name = "m25p128-nonjedec",
+		.sector_size = SZ_256K,
+		.size = SZ_16M,
+	}, {
+		.id = SNOR_ID(0x20, 0x40, 0x11),
+		.name = "m45pe10",
+		.size = SZ_128K,
+	}, {
+		.id = SNOR_ID(0x20, 0x40, 0x14),
+		.name = "m45pe80",
+		.size = SZ_1M,
+	}, {
+		.id = SNOR_ID(0x20, 0x40, 0x15),
+		.name = "m45pe16",
+		.size = SZ_2M,
+	}, {
+		.id = SNOR_ID(0x20, 0x80, 0x12),
+		.name = "m25pe20",
+		.size = SZ_256K,
+	}, {
+		.id = SNOR_ID(0x20, 0x80, 0x14),
+		.name = "m25pe80",
+		.size = SZ_1M,
+	}, {
+		.id = SNOR_ID(0x20, 0x80, 0x15),
+		.name = "m25pe16",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x20, 0x71, 0x15),
+		.name = "m25px16",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x20, 0x71, 0x16),
+		.name = "m25px32",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x20, 0x73, 0x16),
+		.name = "m25px32-s0",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x20, 0x63, 0x16),
+		.name = "m25px32-s1",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x20, 0x71, 0x17),
+		.name = "m25px64",
+		.size = SZ_8M,
+	}, {
+		.id = SNOR_ID(0x20, 0x71, 0x14),
+		.name = "m25px80",
+		.size = SZ_1M,
 	},
-	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-		      SPI_NOR_BP3_SR_BIT6)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-		      SPI_NOR_BP3_SR_BIT6 | NO_CHIP_ERASE)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048)
-		FLAGS(NO_CHIP_ERASE)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096)
-		FLAGS(NO_CHIP_ERASE)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096)
-		FLAGS(NO_CHIP_ERASE)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_FSR)
-	},
-
-	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2) },
-	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4) },
-	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4) },
-	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8) },
-	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16) },
-	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32) },
-	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64) },
-	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128) },
-	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64) },
-
-	{ "m25p05-nonjedec",  INFO0( 32 * 1024,   2) },
-	{ "m25p10-nonjedec",  INFO0( 32 * 1024,   4) },
-	{ "m25p20-nonjedec",  INFO0( 64 * 1024,   4) },
-	{ "m25p40-nonjedec",  INFO0( 64 * 1024,   8) },
-	{ "m25p80-nonjedec",  INFO0( 64 * 1024,  16) },
-	{ "m25p16-nonjedec",  INFO0( 64 * 1024,  32) },
-	{ "m25p32-nonjedec",  INFO0( 64 * 1024,  64) },
-	{ "m25p64-nonjedec",  INFO0( 64 * 1024, 128) },
-	{ "m25p128-nonjedec", INFO0(256 * 1024,  64) },
-
-	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2) },
-	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16) },
-	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32) },
-
-	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4) },
-	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16) },
-	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32)
-		NO_SFDP_FLAGS(SECT_4K) },
-
-	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128) },
-	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16) },
 };
 
 /**

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 26/41] mtd: spi-nor: spansion: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/spansion.c | 370 +++++++++++++++++++++++++++--------------
 1 file changed, 241 insertions(+), 129 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 1a1d2368c462..5953df6aff93 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -756,140 +756,252 @@ static const struct spi_nor_fixups s25fs_s_nor_fixups = {
 };
 
 static const struct flash_info spansion_nor_parts[] = {
-	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
-		NO_SFDP_FLAGS(SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256)
-		FLAGS(SPI_NOR_HAS_LOCK)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-		.fixups = &s25fs_s_nor_fixups, },
-	{ "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-		.fixups = &s25fs_s_nor_fixups, },
-	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64) },
-	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256) },
-	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		MFR_FLAGS(USE_CLSR)
-	},
-	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8) },
-	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16) },
-	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32) },
-	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64) },
-	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128) },
-	{ "s25fl004k",  INFO(0xef4013,      0,  64 * 1024,   8)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "s25fl208k",  INFO(0x014014,      0,  64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "s25fl064l",  INFO(0x016017,      0,  64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
-	{ "s25fl128l",  INFO(0x016018,      0,  64 * 1024, 256)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
-	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
-	{ "s25fs256t",  INFO6(0x342b19, 0x0f0890, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
-		.fixups = &s25fs256t_fixups },
-	{ "s25hl512t",  INFO6(0x342a1a, 0x0f0390, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
-		.fixups = &s25hx_t_fixups },
-	{ "s25hl01gt",  INFO6(0x342a1b, 0x0f0390, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
-		.fixups = &s25hx_t_fixups },
-	{ "s25hl02gt",  INFO6(0x342a1c, 0x0f0090, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
-		FLAGS(NO_CHIP_ERASE)
-		.fixups = &s25hx_t_fixups },
-	{ "s25hs512t",  INFO6(0x342b1a, 0x0f0390, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
-		.fixups = &s25hx_t_fixups },
-	{ "s25hs01gt",  INFO6(0x342b1b, 0x0f0390, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
-		.fixups = &s25hx_t_fixups },
-	{ "s25hs02gt",  INFO6(0x342b1c, 0x0f0090, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
-		FLAGS(NO_CHIP_ERASE)
-		.fixups = &s25hx_t_fixups },
-	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
-		FLAGS(SPI_NOR_NO_ERASE) },
-	{ "s28hl512t",   INFO(0x345a1a,      0, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
+	{
+		.id = SNOR_ID(0x01, 0x02, 0x15, 0x4d, 0x00),
+		.name = "s25sl032p",
+		.size = SZ_4M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x16, 0x4d, 0x00),
+		.name = "s25sl064p",
+		.size = SZ_8M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x00, 0x80),
+		.name = "s25fl128s0",
+		.size = SZ_16M,
+		.sector_size = SZ_256K,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01, 0x80),
+		.name = "s25fl128s1",
+		.size = SZ_16M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x00, 0x80),
+		.name = "s25fl256s0",
+		.size = SZ_32M,
+		.sector_size = SZ_256K,
+		.no_sfdp_flags = SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x01, 0x80),
+		.name = "s25fl256s1",
+		.size = SZ_32M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x20, 0x4d, 0x00, 0x80),
+		.name = "s25fl512s",
+		.size = SZ_64M,
+		.sector_size = SZ_256K,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01, 0x81),
+		.name = "s25fs128s1",
+		.size = SZ_16M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+		.fixups = &s25fs_s_nor_fixups,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x00, 0x81),
+		.name = "s25fs256s0",
+		.size = SZ_32M,
+		.sector_size = SZ_256K,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x01, 0x81),
+		.name = "s25fs256s1",
+		.size = SZ_32M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x20, 0x4d, 0x00, 0x81),
+		.name = "s25fs512s",
+		.size = SZ_64M,
+		.sector_size = SZ_256K,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+		.fixups = &s25fs_s_nor_fixups,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x03, 0x00),
+		.name = "s25sl12800",
+		.size = SZ_16M,
+		.sector_size = SZ_256K,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x03, 0x01),
+		.name = "s25sl12801",
+		.size = SZ_16M,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x00),
+		.name = "s25fl129p0",
+		.size = SZ_16M,
+		.sector_size = SZ_256K,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01),
+		.name = "s25fl129p1",
+		.size = SZ_16M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x12),
+		.name = "s25sl004a",
+		.size = SZ_512K,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x13),
+		.name = "s25sl008a",
+		.size = SZ_1M,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x14),
+		.name = "s25sl016a",
+		.size = SZ_2M,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x15),
+		.name = "s25sl032a",
+		.size = SZ_4M,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x16),
+		.name = "s25sl064a",
+		.size = SZ_8M,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x13),
+		.name = "s25fl004k",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x14),
+		.name = "s25fl008k",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x15),
+		.name = "s25fl016k",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x17),
+		.name = "s25fl064k",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x01, 0x40, 0x15),
+		.name = "s25fl116k",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x01, 0x40, 0x16),
+		.name = "s25fl132k",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x01, 0x40, 0x17),
+		.name = "s25fl164k",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x01, 0x40, 0x13),
+		.name = "s25fl204k",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x01, 0x40, 0x14),
+		.name = "s25fl208k",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x01, 0x60, 0x17),
+		.name = "s25fl064l",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0x01, 0x60, 0x18),
+		.name = "s25fl128l",
+		.size = SZ_16M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0x01, 0x60, 0x19),
+		.name = "s25fl256l",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0x34, 0x2b, 0x19, 0x0f, 0x08, 0x90),
+		.name = "s25fs256t",
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s25fs256t_fixups
+	}, {
+		.id = SNOR_ID(0x34, 0x2a, 0x1a, 0x0f, 0x03, 0x90),
+		.name = "s25hl512t",
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s25hx_t_fixups
+	}, {
+		.id = SNOR_ID(0x34, 0x2a, 0x1b, 0x0f, 0x03, 0x90),
+		.name = "s25hl01gt",
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s25hx_t_fixups
+	}, {
+		.id = SNOR_ID(0x34, 0x2a, 0x1c, 0x0f, 0x00, 0x90),
+		.name = "s25hl02gt",
+		.mfr_flags = USE_CLPEF,
+		.flags = NO_CHIP_ERASE,
+		.fixups = &s25hx_t_fixups
+	}, {
+		.id = SNOR_ID(0x34, 0x2b, 0x1a, 0x0f, 0x03, 0x90),
+		.name = "s25hs512t",
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s25hx_t_fixups
+	}, {
+		.id = SNOR_ID(0x34, 0x2b, 0x1b, 0x0f, 0x03, 0x90),
+		.name = "s25hs01gt",
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s25hx_t_fixups
+	}, {
+		.id = SNOR_ID(0x34, 0x2b, 0x1c, 0x0f, 0x00, 0x90),
+		.name = "s25hs02gt",
+		.mfr_flags = USE_CLPEF,
+		.flags = NO_CHIP_ERASE,
+		.fixups = &s25hx_t_fixups
+	}, {
+		.id = SNOR_ID(0x04, 0x2c, 0xc2, 0x7f, 0x7f, 0x7f),
+		.name = "cy15x104q",
+		.size = SZ_512K,
+		.sector_size = SZ_512K,
+		.flags = SPI_NOR_NO_ERASE,
+	}, {
+		.id = SNOR_ID(0x34, 0x5a, 0x1a),
+		.name = "s28hl512t",
+		.mfr_flags = USE_CLPEF,
 		.fixups = &s28hx_t_fixups,
-	},
-	{ "s28hl01gt",   INFO(0x345a1b,      0, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
+	}, {
+		.id = SNOR_ID(0x34, 0x5a, 0x1b),
+		.name = "s28hl01gt",
+		.mfr_flags = USE_CLPEF,
 		.fixups = &s28hx_t_fixups,
-	},
-	{ "s28hs512t",   INFO(0x345b1a,      0, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
+	}, {
+		.id = SNOR_ID(0x34, 0x5b, 0x1a),
+		.name = "s28hs512t",
+		.mfr_flags = USE_CLPEF,
 		.fixups = &s28hx_t_fixups,
-	},
-	{ "s28hs01gt",   INFO(0x345b1b,      0, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
+	}, {
+		.id = SNOR_ID(0x34, 0x5b, 0x1b),
+		.name = "s28hs01gt",
+		.mfr_flags = USE_CLPEF,
 		.fixups = &s28hx_t_fixups,
-	},
-	{ "s28hs02gt",   INFO(0x345b1c,      0, 0, 0)
-		MFR_FLAGS(USE_CLPEF)
+	}, {
+		.id = SNOR_ID(0x34, 0x5b, 0x1c),
+		.name = "s28hs02gt",
+		.mfr_flags = USE_CLPEF,
 		.fixups = &s28hx_t_fixups,
-	},
+	}
 };
 
 /**

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 27/41] mtd: spi-nor: sst: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/sst.c | 155 ++++++++++++++++++++++++++++++----------------
 1 file changed, 100 insertions(+), 55 deletions(-)

diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 42e29441a7f7..8defff00c35f 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -61,61 +61,106 @@ static const struct spi_nor_fixups sst26vf_nor_fixups = {
 };
 
 static const struct flash_info sst_nor_parts[] = {
-	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP |
-		      SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4)
-		FLAGS(SPI_NOR_HAS_LOCK)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8)
-		FLAGS(SPI_NOR_HAS_LOCK)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K)
-		MFR_FLAGS(SST_WRITE) },
-	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		.fixups = &sst26vf_nor_fixups },
+	{
+		.id = SNOR_ID(0xbf, 0x25, 0x8d),
+		.name = "sst25vf040b",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x8e),
+		.name = "sst25vf080b",
+		.size = SZ_1M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x41),
+		.name = "sst25vf016b",
+		.size = SZ_2M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x4a),
+		.name = "sst25vf032b",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x4b),
+		.name = "sst25vf064c",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x01),
+		.name = "sst25wf512",
+		.size = SZ_64K,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x02),
+		.name = "sst25wf010",
+		.size = SZ_128K,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x03),
+		.name = "sst25wf020",
+		.size = SZ_256K,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0x62, 0x16, 0x12),
+		.name = "sst25wf020a",
+		.size = SZ_256K,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x62, 0x16, 0x13),
+		.name = "sst25wf040b",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x04),
+		.name = "sst25wf040",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x05),
+		.name = "sst25wf080",
+		.size = SZ_1M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x26, 0x51),
+		.name = "sst26wf016b",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xbf, 0x26, 0x41),
+		.name = "sst26vf016b",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0xbf, 0x26, 0x43),
+		.name = "sst26vf064b",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixups = &sst26vf_nor_fixups,
+	}
 };
 
 static int sst_nor_write(struct mtd_info *mtd, loff_t to, size_t len,

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 28/41] mtd: spi-nor: winbond: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/winbond.c | 281 +++++++++++++++++++++++++++---------------
 1 file changed, 185 insertions(+), 96 deletions(-)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 2d3ae972b419..1f95c4ccecd9 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -42,102 +42,191 @@ static const struct spi_nor_fixups w25q256_fixups = {
 };
 
 static const struct flash_info winbond_nor_parts[] = {
-	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024,  32)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q20ew", INFO(0xef6012, 0, 64 * 1024,  4)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		OTP_INFO(256, 3, 0x1000, 0x1000) },
-	{ "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		OTP_INFO(256, 3, 0x1000, 0x1000) },
-	{ "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16)
-		NO_SFDP_FLAGS(SECT_4K) },
-	{ "w25q128", INFO(0xef4018, 0, 0, 0)
-		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-		.fixups = &w25q256_fixups },
-	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 0) },
-	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ |
-			      SPI_NOR_DUAL_READ) },
-	{ "w25q512nwq", INFO(0xef6020, 0, 0, 0)
-		OTP_INFO(256, 3, 0x1000, 0x1000) },
-	{ "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
-		OTP_INFO(256, 3, 0x1000, 0x1000) },
-	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
+	{
+		.id = SNOR_ID(0xef, 0x30, 0x10),
+		.name = "w25x05",
+		.size = SZ_64K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x30, 0x11),
+		.name = "w25x10",
+		.size = SZ_128K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x30, 0x12),
+		.name = "w25x20",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x30, 0x13),
+		.name = "w25x40",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x30, 0x14),
+		.name = "w25x80",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x30, 0x15),
+		.name = "w25x16",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x15),
+		.name = "w25q16dw",
+		.size = SZ_2M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x30, 0x16),
+		.name = "w25x32",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x70, 0x15),
+		.name = "w25q16jv-im/jm",
+		.size = SZ_2M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x12),
+		.name = "w25q20cl",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x50, 0x12),
+		.name = "w25q20bw",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x12),
+		.name = "w25q20ew",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x16),
+		.name = "w25q32",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x16),
+		.name = "w25q32dw",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
+	}, {
+		.id = SNOR_ID(0xef, 0x70, 0x16),
+		.name = "w25q32jv",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x16),
+		.name = "w25q32jwm",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x17),
+		.name = "w25q64jwm",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x18),
+		.name = "w25q128jwm",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x19),
+		.name = "w25q256jwm",
+		.size = SZ_32M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x30, 0x17),
+		.name = "w25x64",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x17),
+		.name = "w25q64",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x17),
+		.name = "w25q64dw",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x70, 0x17),
+		.name = "w25q64jvm",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x18),
+		.name = "w25q128fw",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x70, 0x18),
+		.name = "w25q128jv",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x50, 0x14),
+		.name = "w25q80",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x14),
+		.name = "w25q80bl",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x18),
+		.name = "w25q128",
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x19),
+		.name = "w25q256",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixups = &w25q256_fixups,
+	}, {
+		.id = SNOR_ID(0xef, 0x70, 0x19),
+		.name = "w25q256jvm",
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x19),
+		.name = "w25q256jw",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x71, 0x19),
+		.name = "w25m512jv",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x20),
+		.name = "w25q512nwq",
+		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x20),
+		.name = "w25q512nwm",
+		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x20),
+		.name = "w25q512jvq",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	},
 };
 
 /**

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 29/41] mtd: spi-nor: xilinx: use new macros in S3AN_INFO()

[Michael Walle]

There won't be any new entries, nor are the entries that much different
and the very odd page and sector sizes make the new format hard to read.
Therefore, convert the old S3AN_INFO() macro.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
This collides with the atmel flashes and there seems to be a typo in the
IDs. All this makes me wonder wether we shouldn't deprecate the support
for this (FPGA configuration) flash.
---
 drivers/mtd/spi-nor/xilinx.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 8d4539e32dfe..f99118c691b0 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -21,21 +21,22 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_DATA_IN(1, buf, 0))
 
-#define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
-		SPI_NOR_ID(_jedec_id, 0),				\
-		.size = 8 * (_page_size) * (_n_sectors),		\
-		.sector_size = (8 * (_page_size)),			\
-		.page_size = (_page_size),				\
-		.flags = SPI_NOR_NO_FR
+#define S3AN_FLASH(_id, _name, _n_sectors, _page_size)		\
+	.id = _id,						\
+	.name = _name,						\
+	.size = 8 * (_page_size) * (_n_sectors),		\
+	.sector_size = (8 * (_page_size)),			\
+	.page_size = (_page_size),				\
+	.flags = SPI_NOR_NO_FR
 
 /* Xilinx S3AN share MFR with Atmel SPI NOR */
 static const struct flash_info xilinx_nor_parts[] = {
 	/* Xilinx S3AN Internal Flash */
-	{ "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
-	{ "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
-	{ "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
-	{ "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
-	{ "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
+	{ S3AN_FLASH(SNOR_ID(0x1f, 0x22, 0x00), "3S50AN", 64, 264) },
+	{ S3AN_FLASH(SNOR_ID(0x1f, 0x24, 0x00), "3S200AN", 256, 264) },
+	{ S3AN_FLASH(SNOR_ID(0x1f, 0x24, 0x00), "3S400AN", 256, 264) },
+	{ S3AN_FLASH(SNOR_ID(0x1f, 0x25, 0x00), "3S700AN", 512, 264) },
+	{ S3AN_FLASH(SNOR_ID(0x1f, 0x26, 0x00), "3S1400AN", 512, 528) },
 };
 
 /*

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 30/41] mtd: spi-nor: xmc: convert flash_info to new format

[Michael Walle]

The INFOx() macros are going away. Convert the flash_info database to
the new format.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/xmc.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/spi-nor/xmc.c b/drivers/mtd/spi-nor/xmc.c
index 48062ccb22fa..d5a06054b0dd 100644
--- a/drivers/mtd/spi-nor/xmc.c
+++ b/drivers/mtd/spi-nor/xmc.c
@@ -9,12 +9,17 @@
 #include "core.h"
 
 static const struct flash_info xmc_nor_parts[] = {
-	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
+	{
+		.id = SNOR_ID(0x20, 0x70, 0x17),
+		.name = "XM25QH64A",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0x70, 0x18),
+		.name = "XM25QH128A",
+		.size = SZ_16M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	},
 };
 
 /* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 31/41] mtd: spi-nor: atmel: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/atmel.c | 82 ++++++++++++++++++++++-----------------------
 1 file changed, 41 insertions(+), 41 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index ccc985c48ae3..18e904962d0e 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -164,20 +164,20 @@ static const struct spi_nor_fixups atmel_nor_global_protection_fixups = {
 
 static const struct flash_info atmel_nor_parts[] = {
 	{
-		.id = SNOR_ID(0x1f, 0x66, 0x01),
-		.name = "at25fs010",
-		.sector_size = SZ_32K,
-		.size = SZ_128K,
-		.flags = SPI_NOR_HAS_LOCK,
+		.id = SNOR_ID(0x1f, 0x04, 0x00),
+		.name = "at26f004",
+		.size = SZ_512K,
 		.no_sfdp_flags = SECT_4K,
-		.fixups = &at25fs_nor_fixups
 	}, {
-		.id = SNOR_ID(0x1f, 0x66, 0x04),
-		.name = "at25fs040",
-		.size = SZ_512K,
-		.flags = SPI_NOR_HAS_LOCK,
+		.id = SNOR_ID(0x1f, 0x25, 0x00),
+		.name = "at45db081d",
+		.size = SZ_1M,
 		.no_sfdp_flags = SECT_4K,
-		.fixups = &at25fs_nor_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x42, 0x16),
+		.name = "at25sl321",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0x1f, 0x44, 0x01),
 		.name = "at25df041a",
@@ -186,62 +186,62 @@ static const struct flash_info atmel_nor_parts[] = {
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups,
 	}, {
-		.id = SNOR_ID(0x1f, 0x47, 0x00),
-		.name = "at25df321",
-		.size = SZ_4M,
+		.id = SNOR_ID(0x1f, 0x45, 0x01),
+		.name = "at26df081a",
+		.size = SZ_1M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups
 	}, {
-		.id = SNOR_ID(0x1f, 0x47, 0x01),
-		.name = "at25df321a",
-		.size = SZ_4M,
+		.id = SNOR_ID(0x1f, 0x46, 0x01),
+		.name = "at26df161a",
+		.size = SZ_2M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups
 	}, {
-		.id = SNOR_ID(0x1f, 0x48, 0x00),
-		.name = "at25df641",
-		.size = SZ_8M,
+		.id = SNOR_ID(0x1f, 0x47, 0x00),
+		.name = "at25df321",
+		.size = SZ_4M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups
 	}, {
-		.id = SNOR_ID(0x1f, 0x42, 0x16),
-		.name = "at25sl321",
+		.id = SNOR_ID(0x1f, 0x47, 0x00),
+		.name = "at26df321",
 		.size = SZ_4M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0x1f, 0x04, 0x00),
-		.name = "at26f004",
-		.size = SZ_512K,
-		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0x1f, 0x45, 0x01),
-		.name = "at26df081a",
-		.size = SZ_1M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups
 	}, {
-		.id = SNOR_ID(0x1f, 0x46, 0x01),
-		.name = "at26df161a",
-		.size = SZ_2M,
+		.id = SNOR_ID(0x1f, 0x47, 0x01),
+		.name = "at25df321a",
+		.size = SZ_4M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups
 	}, {
-		.id = SNOR_ID(0x1f, 0x47, 0x00),
-		.name = "at26df321",
-		.size = SZ_4M,
+		.id = SNOR_ID(0x1f, 0x48, 0x00),
+		.name = "at25df641",
+		.size = SZ_8M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups
 	}, {
-		.id = SNOR_ID(0x1f, 0x25, 0x00),
-		.name = "at45db081d",
-		.size = SZ_1M,
+		.id = SNOR_ID(0x1f, 0x66, 0x01),
+		.name = "at25fs010",
+		.sector_size = SZ_32K,
+		.size = SZ_128K,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &at25fs_nor_fixups
+	}, {
+		.id = SNOR_ID(0x1f, 0x66, 0x04),
+		.name = "at25fs040",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK,
 		.no_sfdp_flags = SECT_4K,
+		.fixups = &at25fs_nor_fixups
 	},
 };
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 32/41] mtd: spi-nor: eon: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/eon.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
index ba09cb6c2abd..c1ddf662f782 100644
--- a/drivers/mtd/spi-nor/eon.c
+++ b/drivers/mtd/spi-nor/eon.c
@@ -10,32 +10,37 @@
 
 static const struct flash_info eon_nor_parts[] = {
 	{
-		.id = SNOR_ID(0x1c, 0x31, 0x16),
-		.name = "en25f32",
-		.size = SZ_4M,
-		.no_sfdp_flags = SECT_4K,
-	}, {
 		.id = SNOR_ID(0x1c, 0x20, 0x16),
 		.name = "en25p32",
 		.size = SZ_4M,
-	}, {
-		.id = SNOR_ID(0x1c, 0x30, 0x16),
-		.name = "en25q32b",
-		.size = SZ_4M,
 	}, {
 		.id = SNOR_ID(0x1c, 0x20, 0x17),
 		.name = "en25p64",
 		.size = SZ_8M,
+	}, {
+		.id = SNOR_ID(0x1c, 0x30, 0x14),
+		.name = "en25q80a",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+	}, {
+		.id = SNOR_ID(0x1c, 0x30, 0x16),
+		.name = "en25q32b",
+		.size = SZ_4M,
 	}, {
 		.id = SNOR_ID(0x1c, 0x30, 0x17),
 		.name = "en25q64",
 		.size = SZ_8M,
 		.no_sfdp_flags = SECT_4K,
 	}, {
-		.id = SNOR_ID(0x1c, 0x30, 0x14),
-		.name = "en25q80a",
-		.size = SZ_1M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
+		.id = SNOR_ID(0x1c, 0x31, 0x16),
+		.name = "en25f32",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.name = "en25s64",
+		.id = SNOR_ID(0x1c, 0x38, 0x17),
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0x1c, 0x70, 0x15),
 		.name = "en25qh16",
@@ -57,11 +62,6 @@ static const struct flash_info eon_nor_parts[] = {
 	}, {
 		.id = SNOR_ID(0x1c, 0x70, 0x19),
 		.name = "en25qh256",
-	}, {
-		.name = "en25s64",
-		.id = SNOR_ID(0x1c, 0x38, 0x17),
-		.size = SZ_8M,
-		.no_sfdp_flags = SECT_4K,
 	},
 };
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 33/41] mtd: spi-nor: gigadevice: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/gigadevice.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 0d22cd99715b..ef1edd0add70 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -46,30 +46,12 @@ static const struct flash_info gigadevice_nor_parts[] = {
 		.size = SZ_4M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xc8, 0x60, 0x16),
-		.name = "gd25lq32",
-		.size = SZ_4M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xc8, 0x40, 0x17),
 		.name = "gd25q64",
 		.size = SZ_8M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xc8, 0x60, 0x17),
-		.name = "gd25lq64c",
-		.size = SZ_8M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xc8, 0x60, 0x18),
-		.name = "gd25lq128d",
-		.size = SZ_16M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xc8, 0x40, 0x18),
 		.name = "gd25q128",
@@ -82,6 +64,24 @@ static const struct flash_info gigadevice_nor_parts[] = {
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6,
 		.fixups = &gd25q256_fixups,
 		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0xc8, 0x60, 0x16),
+		.name = "gd25lq32",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x60, 0x17),
+		.name = "gd25lq64c",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc8, 0x60, 0x18),
+		.name = "gd25lq128d",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	},
 };
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 34/41] mtd: spi-nor: issi: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/issi.c | 44 ++++++++++++++++++++++----------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 9478f1e61626..18d9a00aa22e 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -48,26 +48,43 @@ static const struct spi_nor_fixups pm25lv_nor_fixups = {
 
 static const struct flash_info issi_nor_parts[] = {
 	{
+		.name = "pm25lv512",
+		.sector_size = SZ_32K,
+		.size = SZ_64K,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &pm25lv_nor_fixups
+	}, {
+		.name = "pm25lv010",
+		.sector_size = SZ_32K,
+		.size = SZ_128K,
+		.no_sfdp_flags = SECT_4K,
+		.fixups = &pm25lv_nor_fixups
+	}, {
 		.id = SNOR_ID(0x7f, 0x9d, 0x20),
 		.name = "is25cd512",
 		.sector_size = SZ_32K,
 		.size = SZ_64K,
 		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x7f, 0x9d, 0x46),
+		.name = "pm25lq032",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0x9d, 0x40, 0x13),
 		.name = "is25lq040b",
 		.size = SZ_512K,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0x9d, 0x60, 0x15),
-		.name = "is25lp016d",
-		.size = SZ_2M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0x9d, 0x60, 0x14),
 		.name = "is25lp080d",
 		.size = SZ_1M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x9d, 0x60, 0x15),
+		.name = "is25lp016d",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0x9d, 0x60, 0x16),
 		.name = "is25lp032",
@@ -109,23 +126,6 @@ static const struct flash_info issi_nor_parts[] = {
 		.flags = SPI_NOR_QUAD_PP,
 		.fixups = &is25lp256_fixups,
 		.fixup_flags = SPI_NOR_4B_OPCODES,
-	}, {
-		.name = "pm25lv512",
-		.sector_size = SZ_32K,
-		.size = SZ_64K,
-		.no_sfdp_flags = SECT_4K,
-		.fixups = &pm25lv_nor_fixups
-	}, {
-		.name = "pm25lv010",
-		.sector_size = SZ_32K,
-		.size = SZ_128K,
-		.no_sfdp_flags = SECT_4K,
-		.fixups = &pm25lv_nor_fixups
-	}, {
-		.id = SNOR_ID(0x7f, 0x9d, 0x46),
-		.name = "pm25lq032",
-		.size = SZ_4M,
-		.no_sfdp_flags = SECT_4K,
 	}
 };
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 35/41] mtd: spi-nor: macronix: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/macronix.c | 130 ++++++++++++++++++++---------------------
 1 file changed, 65 insertions(+), 65 deletions(-)

diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 0508a207e9df..ea6be95e75a5 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -62,26 +62,44 @@ static const struct flash_info macronix_nor_parts[] = {
 		.name = "mx25l3205d",
 		.size = SZ_4M,
 		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xc2, 0x9e, 0x16),
-		.name = "mx25l3255e",
-		.size = SZ_4M,
-		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0xc2, 0x20, 0x17),
 		.name = "mx25l6405d",
 		.size = SZ_8M,
 		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x18),
+		.name = "mx25l12805d",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x19),
+		.name = "mx25l25635e",
+		.size = SZ_32M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixups = &mx25l25635_fixups
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x1a),
+		.name = "mx66l51235f",
+		.size = SZ_64M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0xc2, 0x20, 0x1b),
+		.name = "mx66l1g45g",
+		.size = SZ_128M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x23, 0x14),
+		.name = "mx25v8035f",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x32),
 		.name = "mx25u2033e",
 		.size = SZ_256K,
 		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xc2, 0x25, 0x36),
-		.name = "mx25u3235f",
-		.size = SZ_4M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x33),
 		.name = "mx25u4035",
@@ -92,74 +110,33 @@ static const struct flash_info macronix_nor_parts[] = {
 		.name = "mx25u8035",
 		.size = SZ_1M,
 		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xc2, 0x25, 0x36),
+		.name = "mx25u3235f",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x37),
 		.name = "mx25u6435f",
 		.size = SZ_8M,
 		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xc2, 0x20, 0x18),
-		.name = "mx25l12805d",
-		.size = SZ_16M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP,
-		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xc2, 0x26, 0x18),
-		.name = "mx25l12855e",
-		.size = SZ_16M,
-	}, {
-		.id = SNOR_ID(0xc2, 0x28, 0x15),
-		.name = "mx25r1635f",
-		.size = SZ_2M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xc2, 0x28, 0x16),
-		.name = "mx25r3235f",
-		.size = SZ_4M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x38),
 		.name = "mx25u12835f",
 		.size = SZ_16M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xc2, 0x20, 0x19),
-		.name = "mx25l25635e",
-		.size = SZ_32M,
-		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixups = &mx25l25635_fixups
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x39),
 		.name = "mx25u25635f",
 		.size = SZ_32M,
 		.no_sfdp_flags = SECT_4K,
-		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
+		.fixup_flags = SPI_NOR_4B_OPCODES,
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x3a),
 		.name = "mx25u51245g",
 		.size = SZ_64M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.fixup_flags = SPI_NOR_4B_OPCODES,
-	}, {
-		.id = SNOR_ID(0xc2, 0x81, 0x3a),
-		.name = "mx25uw51245g",
-		.n_banks = 4,
-		.flags = SPI_NOR_RWW,
-	}, {
-		.id = SNOR_ID(0xc2, 0x23, 0x14),
-		.name = "mx25v8035f",
-		.size = SZ_1M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xc2, 0x26, 0x19),
-		.name = "mx25l25655e",
-		.size = SZ_32M,
-	}, {
-		.id = SNOR_ID(0xc2, 0x20, 0x1a),
-		.name = "mx66l51235f",
-		.size = SZ_64M,
-		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixup_flags = SPI_NOR_4B_OPCODES,
 	}, {
 		.id = SNOR_ID(0xc2, 0x25, 0x3a),
 		.name = "mx66u51235f",
@@ -167,22 +144,45 @@ static const struct flash_info macronix_nor_parts[] = {
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.fixup_flags = SPI_NOR_4B_OPCODES,
 	}, {
-		.id = SNOR_ID(0xc2, 0x20, 0x1b),
-		.name = "mx66l1g45g",
-		.size = SZ_128M,
+		.id = SNOR_ID(0xc2, 0x25, 0x3c),
+		.name = "mx66u2g45g",
+		.size = SZ_256M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+	}, {
+		.id = SNOR_ID(0xc2, 0x26, 0x18),
+		.name = "mx25l12855e",
+		.size = SZ_16M,
+	}, {
+		.id = SNOR_ID(0xc2, 0x26, 0x19),
+		.name = "mx25l25655e",
+		.size = SZ_32M,
 	}, {
 		.id = SNOR_ID(0xc2, 0x26, 0x1b),
 		.name = "mx66l1g55g",
 		.size = SZ_128M,
 		.no_sfdp_flags = SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0xc2, 0x25, 0x3c),
-		.name = "mx66u2g45g",
-		.size = SZ_256M,
+		.id = SNOR_ID(0xc2, 0x28, 0x15),
+		.name = "mx25r1635f",
+		.size = SZ_2M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixup_flags = SPI_NOR_4B_OPCODES,
-	},
+	}, {
+		.id = SNOR_ID(0xc2, 0x28, 0x16),
+		.name = "mx25r3235f",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xc2, 0x81, 0x3a),
+		.name = "mx25uw51245g",
+		.n_banks = 4,
+		.flags = SPI_NOR_RWW,
+	}, {
+		.id = SNOR_ID(0xc2, 0x9e, 0x16),
+		.name = "mx25l3255e",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
+	}
 };
 
 static void macronix_nor_default_init(struct spi_nor *nor)

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 36/41] mtd: spi-nor: micron-st: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/micron-st.c | 336 ++++++++++++++++++++--------------------
 1 file changed, 168 insertions(+), 168 deletions(-)

diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 720fd2fbd0ad..4afcfc57c896 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -182,133 +182,35 @@ static const struct flash_info micron_nor_parts[] = {
 
 static const struct flash_info st_nor_parts[] = {
 	{
-		.id = SNOR_ID(0x20, 0xbb, 0x15),
-		.name = "n25q016a",
-		.size = SZ_2M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x16),
-		.name = "n25q032",
-		.size = SZ_4M,
-		.no_sfdp_flags = SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x16),
-		.name = "n25q032a",
-		.size = SZ_4M,
-		.no_sfdp_flags = SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x17),
-		.name = "n25q064",
-		.size = SZ_8M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x17),
-		.name = "n25q064a",
-		.size = SZ_8M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x18),
-		.name = "n25q128a11",
-		.size = SZ_16M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-			 SPI_NOR_BP3_SR_BIT6,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
-	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x18),
-		.name = "n25q128a13",
-		.size = SZ_16M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-			 SPI_NOR_BP3_SR_BIT6,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
-	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x19, 0x10, 0x44, 0x00),
-		.name = "mt25ql256a",
-		.size = SZ_32M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixup_flags = SPI_NOR_4B_OPCODES,
-		.mfr_flags = USE_FSR,
-	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x19),
-		.name = "n25q256a",
-		.size = SZ_32M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
-	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x19, 0x10, 0x44, 0x00),
-		.name = "mt25qu256a",
-		.size = SZ_32M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-			 SPI_NOR_BP3_SR_BIT6,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixup_flags = SPI_NOR_4B_OPCODES,
-		.mfr_flags = USE_FSR,
-	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x19),
-		.name = "n25q256ax1",
-		.size = SZ_32M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
+		.name = "m25p05-nonjedec",
+		.sector_size = SZ_32K,
+		.size = SZ_64K,
 	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x20, 0x10, 0x44, 0x00),
-		.name = "mt25ql512a",
-		.size = SZ_64M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixup_flags = SPI_NOR_4B_OPCODES,
-		.mfr_flags = USE_FSR,
+		.name = "m25p10-nonjedec",
+		.sector_size = SZ_32K,
+		.size = SZ_128K,
 	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x20),
-		.name = "n25q512ax3",
-		.size = SZ_64M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-			 SPI_NOR_BP3_SR_BIT6,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
+		.name = "m25p20-nonjedec",
+		.size = SZ_256K,
 	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x20, 0x10, 0x44, 0x00),
-		.name = "mt25qu512a",
-		.size = SZ_64M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixup_flags = SPI_NOR_4B_OPCODES,
-		.mfr_flags = USE_FSR,
+		.name = "m25p40-nonjedec",
+		.size = SZ_512K,
 	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x20),
-		.name = "n25q512a",
-		.size = SZ_64M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-			 SPI_NOR_BP3_SR_BIT6,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
+		.name = "m25p80-nonjedec",
+		.size = SZ_1M,
 	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x21),
-		.name = "n25q00",
-		.size = SZ_128M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
-			 SPI_NOR_BP3_SR_BIT6 | NO_CHIP_ERASE,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
+		.name = "m25p16-nonjedec",
+		.size = SZ_2M,
 	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x21),
-		.name = "n25q00a",
-		.size = SZ_128M,
-		.flags = NO_CHIP_ERASE,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
+		.name = "m25p32-nonjedec",
+		.size = SZ_4M,
 	}, {
-		.id = SNOR_ID(0x20, 0xba, 0x22),
-		.name = "mt25ql02g",
-		.size = SZ_256M,
-		.flags = NO_CHIP_ERASE,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
+		.name = "m25p64-nonjedec",
+		.size = SZ_8M,
 	}, {
-		.id = SNOR_ID(0x20, 0xbb, 0x22),
-		.name = "mt25qu02g",
-		.size = SZ_256M,
-		.flags = NO_CHIP_ERASE,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_FSR,
+		.name = "m25p128-nonjedec",
+		.sector_size = SZ_256K,
+		.size = SZ_16M,
 	}, {
 		.id = SNOR_ID(0x20, 0x20, 0x10),
 		.name = "m25p05",
@@ -348,36 +250,6 @@ static const struct flash_info st_nor_parts[] = {
 		.name = "m25p128",
 		.sector_size = SZ_256K,
 		.size = SZ_16M,
-	}, {
-		.name = "m25p05-nonjedec",
-		.sector_size = SZ_32K,
-		.size = SZ_64K,
-	}, {
-		.name = "m25p10-nonjedec",
-		.sector_size = SZ_32K,
-		.size = SZ_128K,
-	}, {
-		.name = "m25p20-nonjedec",
-		.size = SZ_256K,
-	}, {
-		.name = "m25p40-nonjedec",
-		.size = SZ_512K,
-	}, {
-		.name = "m25p80-nonjedec",
-		.size = SZ_1M,
-	}, {
-		.name = "m25p16-nonjedec",
-		.size = SZ_2M,
-	}, {
-		.name = "m25p32-nonjedec",
-		.size = SZ_4M,
-	}, {
-		.name = "m25p64-nonjedec",
-		.size = SZ_8M,
-	}, {
-		.name = "m25p128-nonjedec",
-		.sector_size = SZ_256K,
-		.size = SZ_16M,
 	}, {
 		.id = SNOR_ID(0x20, 0x40, 0x11),
 		.name = "m45pe10",
@@ -391,18 +263,14 @@ static const struct flash_info st_nor_parts[] = {
 		.name = "m45pe16",
 		.size = SZ_2M,
 	}, {
-		.id = SNOR_ID(0x20, 0x80, 0x12),
-		.name = "m25pe20",
-		.size = SZ_256K,
+		.id = SNOR_ID(0x20, 0x63, 0x16),
+		.name = "m25px32-s1",
+		.size = SZ_4M,
+		.no_sfdp_flags = SECT_4K,
 	}, {
-		.id = SNOR_ID(0x20, 0x80, 0x14),
-		.name = "m25pe80",
+		.id = SNOR_ID(0x20, 0x71, 0x14),
+		.name = "m25px80",
 		.size = SZ_1M,
-	}, {
-		.id = SNOR_ID(0x20, 0x80, 0x15),
-		.name = "m25pe16",
-		.size = SZ_2M,
-		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0x20, 0x71, 0x15),
 		.name = "m25px16",
@@ -413,25 +281,157 @@ static const struct flash_info st_nor_parts[] = {
 		.name = "m25px32",
 		.size = SZ_4M,
 		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0x20, 0x71, 0x17),
+		.name = "m25px64",
+		.size = SZ_8M,
 	}, {
 		.id = SNOR_ID(0x20, 0x73, 0x16),
 		.name = "m25px32-s0",
 		.size = SZ_4M,
 		.no_sfdp_flags = SECT_4K,
 	}, {
-		.id = SNOR_ID(0x20, 0x63, 0x16),
-		.name = "m25px32-s1",
-		.size = SZ_4M,
+		.id = SNOR_ID(0x20, 0x80, 0x12),
+		.name = "m25pe20",
+		.size = SZ_256K,
+	}, {
+		.id = SNOR_ID(0x20, 0x80, 0x14),
+		.name = "m25pe80",
+		.size = SZ_1M,
+	}, {
+		.id = SNOR_ID(0x20, 0x80, 0x15),
+		.name = "m25pe16",
+		.size = SZ_2M,
 		.no_sfdp_flags = SECT_4K,
 	}, {
-		.id = SNOR_ID(0x20, 0x71, 0x17),
-		.name = "m25px64",
+		.id = SNOR_ID(0x20, 0xba, 0x16),
+		.name = "n25q032",
+		.size = SZ_4M,
+		.no_sfdp_flags = SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x17),
+		.name = "n25q064",
 		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0x20, 0x71, 0x14),
-		.name = "m25px80",
-		.size = SZ_1M,
-	},
+		.id = SNOR_ID(0x20, 0xba, 0x18),
+		.name = "n25q128a13",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x19, 0x10, 0x44, 0x00),
+		.name = "mt25ql256a",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x19),
+		.name = "n25q256a",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x20, 0x10, 0x44, 0x00),
+		.name = "mt25ql512a",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x20),
+		.name = "n25q512ax3",
+		.size = SZ_64M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x21),
+		.name = "n25q00",
+		.size = SZ_128M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6 | NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xba, 0x22),
+		.name = "mt25ql02g",
+		.size = SZ_256M,
+		.flags = NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x15),
+		.name = "n25q016a",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x16),
+		.name = "n25q032a",
+		.size = SZ_4M,
+		.no_sfdp_flags = SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x17),
+		.name = "n25q064a",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x18),
+		.name = "n25q128a11",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x19, 0x10, 0x44, 0x00),
+		.name = "mt25qu256a",
+		.size = SZ_32M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x19),
+		.name = "n25q256ax1",
+		.size = SZ_32M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x20, 0x10, 0x44, 0x00),
+		.name = "mt25qu512a",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.fixup_flags = SPI_NOR_4B_OPCODES,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x20),
+		.name = "n25q512a",
+		.size = SZ_64M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+			 SPI_NOR_BP3_SR_BIT6,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x21),
+		.name = "n25q00a",
+		.size = SZ_128M,
+		.flags = NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}, {
+		.id = SNOR_ID(0x20, 0xbb, 0x22),
+		.name = "mt25qu02g",
+		.size = SZ_256M,
+		.flags = NO_CHIP_ERASE,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_FSR,
+	}
 };
 
 /**

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 37/41] mtd: spi-nor: spansion: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/spansion.c | 174 ++++++++++++++++++++---------------------
 1 file changed, 87 insertions(+), 87 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 5953df6aff93..fd2652aa6c1e 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -757,28 +757,35 @@ static const struct spi_nor_fixups s25fs_s_nor_fixups = {
 
 static const struct flash_info spansion_nor_parts[] = {
 	{
+		.id = SNOR_ID(0x01, 0x02, 0x12),
+		.name = "s25sl004a",
+		.size = SZ_512K,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x13),
+		.name = "s25sl008a",
+		.size = SZ_1M,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x14),
+		.name = "s25sl016a",
+		.size = SZ_2M,
+	}, {
 		.id = SNOR_ID(0x01, 0x02, 0x15, 0x4d, 0x00),
 		.name = "s25sl032p",
 		.size = SZ_4M,
 		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x15),
+		.name = "s25sl032a",
+		.size = SZ_4M,
 	}, {
 		.id = SNOR_ID(0x01, 0x02, 0x16, 0x4d, 0x00),
 		.name = "s25sl064p",
 		.size = SZ_8M,
 		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x00, 0x80),
-		.name = "s25fl128s0",
-		.size = SZ_16M,
-		.sector_size = SZ_256K,
-		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_CLSR,
-	}, {
-		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01, 0x80),
-		.name = "s25fl128s1",
-		.size = SZ_16M,
-		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_CLSR,
+		.id = SNOR_ID(0x01, 0x02, 0x16),
+		.name = "s25sl064a",
+		.size = SZ_8M,
 	}, {
 		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x00, 0x80),
 		.name = "s25fl256s0",
@@ -787,31 +794,16 @@ static const struct flash_info spansion_nor_parts[] = {
 		.no_sfdp_flags = SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.mfr_flags = USE_CLSR,
 	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x01, 0x80),
-		.name = "s25fl256s1",
+		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x00, 0x81),
+		.name = "s25fs256s0",
 		.size = SZ_32M,
-		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_CLSR,
-	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x20, 0x4d, 0x00, 0x80),
-		.name = "s25fl512s",
-		.size = SZ_64M,
 		.sector_size = SZ_256K,
-		.flags = SPI_NOR_HAS_LOCK,
 		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.mfr_flags = USE_CLSR,
 	}, {
-		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01, 0x81),
-		.name = "s25fs128s1",
-		.size = SZ_16M,
-		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.mfr_flags = USE_CLSR,
-		.fixups = &s25fs_s_nor_fixups,
-	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x00, 0x81),
-		.name = "s25fs256s0",
+		.id = SNOR_ID(0x01, 0x02, 0x19, 0x4d, 0x01, 0x80),
+		.name = "s25fl256s1",
 		.size = SZ_32M,
-		.sector_size = SZ_256K,
 		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.mfr_flags = USE_CLSR,
 	}, {
@@ -820,6 +812,14 @@ static const struct flash_info spansion_nor_parts[] = {
 		.size = SZ_32M,
 		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.mfr_flags = USE_CLSR,
+	}, {
+		.id = SNOR_ID(0x01, 0x02, 0x20, 0x4d, 0x00, 0x80),
+		.name = "s25fl512s",
+		.size = SZ_64M,
+		.sector_size = SZ_256K,
+		.flags = SPI_NOR_HAS_LOCK,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
 	}, {
 		.id = SNOR_ID(0x01, 0x02, 0x20, 0x4d, 0x00, 0x81),
 		.name = "s25fs512s",
@@ -837,6 +837,13 @@ static const struct flash_info spansion_nor_parts[] = {
 		.id = SNOR_ID(0x01, 0x20, 0x18, 0x03, 0x01),
 		.name = "s25sl12801",
 		.size = SZ_16M,
+	}, {
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x00, 0x80),
+		.name = "s25fl128s0",
+		.size = SZ_16M,
+		.sector_size = SZ_256K,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
 	}, {
 		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x00),
 		.name = "s25fl129p0",
@@ -845,51 +852,34 @@ static const struct flash_info spansion_nor_parts[] = {
 		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.mfr_flags = USE_CLSR,
 	}, {
-		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01),
-		.name = "s25fl129p1",
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01, 0x80),
+		.name = "s25fl128s1",
 		.size = SZ_16M,
 		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.mfr_flags = USE_CLSR,
 	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x12),
-		.name = "s25sl004a",
-		.size = SZ_512K,
-	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x13),
-		.name = "s25sl008a",
-		.size = SZ_1M,
-	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x14),
-		.name = "s25sl016a",
-		.size = SZ_2M,
-	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x15),
-		.name = "s25sl032a",
-		.size = SZ_4M,
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01, 0x81),
+		.name = "s25fs128s1",
+		.size = SZ_16M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
+		.fixups = &s25fs_s_nor_fixups,
 	}, {
-		.id = SNOR_ID(0x01, 0x02, 0x16),
-		.name = "s25sl064a",
-		.size = SZ_8M,
+		.id = SNOR_ID(0x01, 0x20, 0x18, 0x4d, 0x01),
+		.name = "s25fl129p1",
+		.size = SZ_16M,
+		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.mfr_flags = USE_CLSR,
 	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x13),
-		.name = "s25fl004k",
+		.id = SNOR_ID(0x01, 0x40, 0x13),
+		.name = "s25fl204k",
 		.size = SZ_512K,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
 	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x14),
-		.name = "s25fl008k",
+		.id = SNOR_ID(0x01, 0x40, 0x14),
+		.name = "s25fl208k",
 		.size = SZ_1M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x15),
-		.name = "s25fl016k",
-		.size = SZ_2M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x17),
-		.name = "s25fl064k",
-		.size = SZ_8M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
 	}, {
 		.id = SNOR_ID(0x01, 0x40, 0x15),
 		.name = "s25fl116k",
@@ -905,16 +895,6 @@ static const struct flash_info spansion_nor_parts[] = {
 		.name = "s25fl164k",
 		.size = SZ_8M,
 		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0x01, 0x40, 0x13),
-		.name = "s25fl204k",
-		.size = SZ_512K,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
-	}, {
-		.id = SNOR_ID(0x01, 0x40, 0x14),
-		.name = "s25fl208k",
-		.size = SZ_1M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ,
 	}, {
 		.id = SNOR_ID(0x01, 0x60, 0x17),
 		.name = "s25fl064l",
@@ -934,10 +914,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.fixup_flags = SPI_NOR_4B_OPCODES,
 	}, {
-		.id = SNOR_ID(0x34, 0x2b, 0x19, 0x0f, 0x08, 0x90),
-		.name = "s25fs256t",
-		.mfr_flags = USE_CLPEF,
-		.fixups = &s25fs256t_fixups
+		.id = SNOR_ID(0x04, 0x2c, 0xc2, 0x7f, 0x7f, 0x7f),
+		.name = "cy15x104q",
+		.size = SZ_512K,
+		.sector_size = SZ_512K,
+		.flags = SPI_NOR_NO_ERASE,
 	}, {
 		.id = SNOR_ID(0x34, 0x2a, 0x1a, 0x0f, 0x03, 0x90),
 		.name = "s25hl512t",
@@ -954,6 +935,11 @@ static const struct flash_info spansion_nor_parts[] = {
 		.mfr_flags = USE_CLPEF,
 		.flags = NO_CHIP_ERASE,
 		.fixups = &s25hx_t_fixups
+	}, {
+		.id = SNOR_ID(0x34, 0x2b, 0x19, 0x0f, 0x08, 0x90),
+		.name = "s25fs256t",
+		.mfr_flags = USE_CLPEF,
+		.fixups = &s25fs256t_fixups
 	}, {
 		.id = SNOR_ID(0x34, 0x2b, 0x1a, 0x0f, 0x03, 0x90),
 		.name = "s25hs512t",
@@ -970,12 +956,6 @@ static const struct flash_info spansion_nor_parts[] = {
 		.mfr_flags = USE_CLPEF,
 		.flags = NO_CHIP_ERASE,
 		.fixups = &s25hx_t_fixups
-	}, {
-		.id = SNOR_ID(0x04, 0x2c, 0xc2, 0x7f, 0x7f, 0x7f),
-		.name = "cy15x104q",
-		.size = SZ_512K,
-		.sector_size = SZ_512K,
-		.flags = SPI_NOR_NO_ERASE,
 	}, {
 		.id = SNOR_ID(0x34, 0x5a, 0x1a),
 		.name = "s28hl512t",
@@ -1001,6 +981,26 @@ static const struct flash_info spansion_nor_parts[] = {
 		.name = "s28hs02gt",
 		.mfr_flags = USE_CLPEF,
 		.fixups = &s28hx_t_fixups,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x13),
+		.name = "s25fl004k",
+		.size = SZ_512K,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x14),
+		.name = "s25fl008k",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x15),
+		.name = "s25fl016k",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x17),
+		.name = "s25fl064k",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}
 };
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 38/41] mtd: spi-nor: sst: sort flash_info database

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/sst.c | 90 +++++++++++++++++++++++------------------------
 1 file changed, 45 insertions(+), 45 deletions(-)

diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 8defff00c35f..0f09eaf43db9 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -62,38 +62,16 @@ static const struct spi_nor_fixups sst26vf_nor_fixups = {
 
 static const struct flash_info sst_nor_parts[] = {
 	{
-		.id = SNOR_ID(0xbf, 0x25, 0x8d),
-		.name = "sst25vf040b",
-		.size = SZ_512K,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
-		.no_sfdp_flags = SECT_4K,
-		.mfr_flags = SST_WRITE,
-	}, {
-		.id = SNOR_ID(0xbf, 0x25, 0x8e),
-		.name = "sst25vf080b",
-		.size = SZ_1M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
-		.no_sfdp_flags = SECT_4K,
-		.mfr_flags = SST_WRITE,
-	}, {
-		.id = SNOR_ID(0xbf, 0x25, 0x41),
-		.name = "sst25vf016b",
-		.size = SZ_2M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
-		.no_sfdp_flags = SECT_4K,
-		.mfr_flags = SST_WRITE,
-	}, {
-		.id = SNOR_ID(0xbf, 0x25, 0x4a),
-		.name = "sst25vf032b",
-		.size = SZ_4M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.id = SNOR_ID(0x62, 0x16, 0x12),
+		.name = "sst25wf020a",
+		.size = SZ_256K,
+		.flags = SPI_NOR_HAS_LOCK,
 		.no_sfdp_flags = SECT_4K,
-		.mfr_flags = SST_WRITE,
 	}, {
-		.id = SNOR_ID(0xbf, 0x25, 0x4b),
-		.name = "sst25vf064c",
-		.size = SZ_8M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP | SPI_NOR_SWP_IS_VOLATILE,
+		.id = SNOR_ID(0x62, 0x16, 0x13),
+		.name = "sst25wf040b",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK,
 		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0xbf, 0x25, 0x01),
@@ -116,18 +94,6 @@ static const struct flash_info sst_nor_parts[] = {
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.mfr_flags = SST_WRITE,
-	}, {
-		.id = SNOR_ID(0x62, 0x16, 0x12),
-		.name = "sst25wf020a",
-		.size = SZ_256K,
-		.flags = SPI_NOR_HAS_LOCK,
-		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0x62, 0x16, 0x13),
-		.name = "sst25wf040b",
-		.size = SZ_512K,
-		.flags = SPI_NOR_HAS_LOCK,
-		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0xbf, 0x25, 0x04),
 		.name = "sst25wf040",
@@ -143,10 +109,39 @@ static const struct flash_info sst_nor_parts[] = {
 		.no_sfdp_flags = SECT_4K,
 		.mfr_flags = SST_WRITE,
 	}, {
-		.id = SNOR_ID(0xbf, 0x26, 0x51),
-		.name = "sst26wf016b",
+		.id = SNOR_ID(0xbf, 0x25, 0x41),
+		.name = "sst25vf016b",
 		.size = SZ_2M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x4a),
+		.name = "sst25vf032b",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x4b),
+		.name = "sst25vf064c",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x8d),
+		.name = "sst25vf040b",
+		.size = SZ_512K,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
+	}, {
+		.id = SNOR_ID(0xbf, 0x25, 0x8e),
+		.name = "sst25vf080b",
+		.size = SZ_1M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
+		.no_sfdp_flags = SECT_4K,
+		.mfr_flags = SST_WRITE,
 	}, {
 		.id = SNOR_ID(0xbf, 0x26, 0x41),
 		.name = "sst26vf016b",
@@ -160,6 +155,11 @@ static const struct flash_info sst_nor_parts[] = {
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.fixups = &sst26vf_nor_fixups,
+	}, {
+		.id = SNOR_ID(0xbf, 0x26, 0x51),
+		.name = "sst26wf016b",
+		.size = SZ_2M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}
 };
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 39/41] mtd: spi-nor: winbond: sort flash_info entries

[Michael Walle]

The flash ID is the new primary key into our database. Sort the entry by
it. Keep the most specific ones first, because there might be ID
collisions between shorter and longer ones.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/winbond.c | 166 +++++++++++++++++++++---------------------
 1 file changed, 83 insertions(+), 83 deletions(-)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 1f95c4ccecd9..6ce50c3f3c27 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -72,37 +72,25 @@ static const struct flash_info winbond_nor_parts[] = {
 		.name = "w25x16",
 		.size = SZ_2M,
 		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xef, 0x60, 0x15),
-		.name = "w25q16dw",
-		.size = SZ_2M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xef, 0x30, 0x16),
 		.name = "w25x32",
 		.size = SZ_4M,
 		.no_sfdp_flags = SECT_4K,
 	}, {
-		.id = SNOR_ID(0xef, 0x70, 0x15),
-		.name = "w25q16jv-im/jm",
-		.size = SZ_2M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+		.id = SNOR_ID(0xef, 0x30, 0x17),
+		.name = "w25x64",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0xef, 0x40, 0x12),
 		.name = "w25q20cl",
 		.size = SZ_256K,
 		.no_sfdp_flags = SECT_4K,
 	}, {
-		.id = SNOR_ID(0xef, 0x50, 0x12),
-		.name = "w25q20bw",
-		.size = SZ_256K,
-		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xef, 0x60, 0x12),
-		.name = "w25q20ew",
-		.size = SZ_256K,
+		.id = SNOR_ID(0xef, 0x40, 0x14),
+		.name = "w25q80bl",
+		.size = SZ_1M,
 		.no_sfdp_flags = SECT_4K,
 	}, {
 		.id = SNOR_ID(0xef, 0x40, 0x16),
@@ -110,57 +98,84 @@ static const struct flash_info winbond_nor_parts[] = {
 		.size = SZ_4M,
 		.no_sfdp_flags = SECT_4K,
 	}, {
-		.id = SNOR_ID(0xef, 0x60, 0x16),
-		.name = "w25q32dw",
-		.size = SZ_4M,
+		.id = SNOR_ID(0xef, 0x40, 0x17),
+		.name = "w25q64",
+		.size = SZ_8M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x18),
+		.name = "w25q128",
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+	}, {
+		.id = SNOR_ID(0xef, 0x40, 0x19),
+		.name = "w25q256",
+		.size = SZ_32M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
+		.fixups = &w25q256_fixups,
 	}, {
-		.id = SNOR_ID(0xef, 0x70, 0x16),
-		.name = "w25q32jv",
-		.size = SZ_4M,
+		.id = SNOR_ID(0xef, 0x40, 0x20),
+		.name = "w25q512jvq",
+		.size = SZ_64M,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x50, 0x12),
+		.name = "w25q20bw",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x50, 0x14),
+		.name = "w25q80",
+		.size = SZ_1M,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x12),
+		.name = "w25q20ew",
+		.size = SZ_256K,
+		.no_sfdp_flags = SECT_4K,
+	}, {
+		.id = SNOR_ID(0xef, 0x60, 0x15),
+		.name = "w25q16dw",
+		.size = SZ_2M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0xef, 0x80, 0x16),
-		.name = "w25q32jwm",
+		.id = SNOR_ID(0xef, 0x60, 0x16),
+		.name = "w25q32dw",
 		.size = SZ_4M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
 	}, {
-		.id = SNOR_ID(0xef, 0x80, 0x17),
-		.name = "w25q64jwm",
+		.id = SNOR_ID(0xef, 0x60, 0x17),
+		.name = "w25q64dw",
 		.size = SZ_8M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0xef, 0x80, 0x18),
-		.name = "w25q128jwm",
+		.id = SNOR_ID(0xef, 0x60, 0x18),
+		.name = "w25q128fw",
 		.size = SZ_16M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0xef, 0x80, 0x19),
-		.name = "w25q256jwm",
+		.id = SNOR_ID(0xef, 0x60, 0x19),
+		.name = "w25q256jw",
 		.size = SZ_32M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0xef, 0x30, 0x17),
-		.name = "w25x64",
-		.size = SZ_8M,
-		.no_sfdp_flags = SECT_4K,
+		.id = SNOR_ID(0xef, 0x60, 0x20),
+		.name = "w25q512nwq",
+		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
 	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x17),
-		.name = "w25q64",
-		.size = SZ_8M,
+		.id = SNOR_ID(0xef, 0x70, 0x15),
+		.name = "w25q16jv-im/jm",
+		.size = SZ_2M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0xef, 0x60, 0x17),
-		.name = "w25q64dw",
-		.size = SZ_8M,
+		.id = SNOR_ID(0xef, 0x70, 0x16),
+		.name = "w25q32jv",
+		.size = SZ_4M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
@@ -168,64 +183,49 @@ static const struct flash_info winbond_nor_parts[] = {
 		.name = "w25q64jvm",
 		.size = SZ_8M,
 		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xef, 0x60, 0x18),
-		.name = "w25q128fw",
-		.size = SZ_16M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xef, 0x70, 0x18),
 		.name = "w25q128jv",
 		.size = SZ_16M,
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-	}, {
-		.id = SNOR_ID(0xef, 0x50, 0x14),
-		.name = "w25q80",
-		.size = SZ_1M,
-		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x14),
-		.name = "w25q80bl",
-		.size = SZ_1M,
-		.no_sfdp_flags = SECT_4K,
-	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x18),
-		.name = "w25q128",
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
-	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x19),
-		.name = "w25q256",
-		.size = SZ_32M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
-		.fixups = &w25q256_fixups,
 	}, {
 		.id = SNOR_ID(0xef, 0x70, 0x19),
 		.name = "w25q256jvm",
-	}, {
-		.id = SNOR_ID(0xef, 0x60, 0x19),
-		.name = "w25q256jw",
-		.size = SZ_32M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xef, 0x71, 0x19),
 		.name = "w25m512jv",
 		.size = SZ_64M,
 		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
-		.id = SNOR_ID(0xef, 0x60, 0x20),
-		.name = "w25q512nwq",
+		.id = SNOR_ID(0xef, 0x80, 0x16),
+		.name = "w25q32jwm",
+		.size = SZ_4M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x17),
+		.name = "w25q64jwm",
+		.size = SZ_8M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x18),
+		.name = "w25q128jwm",
+		.size = SZ_16M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+	}, {
+		.id = SNOR_ID(0xef, 0x80, 0x19),
+		.name = "w25q256jwm",
+		.size = SZ_32M,
+		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB,
+		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	}, {
 		.id = SNOR_ID(0xef, 0x80, 0x20),
 		.name = "w25q512nwm",
 		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
-	}, {
-		.id = SNOR_ID(0xef, 0x40, 0x20),
-		.name = "w25q512jvq",
-		.size = SZ_64M,
-		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
 	},
 };
 

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 40/41] mtd: spi-nor: atmel: drop duplicate entry

[Michael Walle]

The Atmel AT26DF321 and AT25DF321 have the same ID. Both were just
discovered by reading their IDs, that is, there is no probing by name.
Thus only the first one in the list was ever probed. The AT25DF is the
newer series. Drop the older one.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/atmel.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index 18e904962d0e..95f0e139284e 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -206,13 +206,6 @@ static const struct flash_info atmel_nor_parts[] = {
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
 		.no_sfdp_flags = SECT_4K,
 		.fixups = &atmel_nor_global_protection_fixups
-	}, {
-		.id = SNOR_ID(0x1f, 0x47, 0x00),
-		.name = "at26df321",
-		.size = SZ_4M,
-		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE,
-		.no_sfdp_flags = SECT_4K,
-		.fixups = &atmel_nor_global_protection_fixups
 	}, {
 		.id = SNOR_ID(0x1f, 0x47, 0x01),
 		.name = "at25df321a",

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 41/41] mtd: spi-nor: core: get rid of the INFOx() macros

[Michael Walle]

Now that all flash_info tables are converted to the new format, remove
the old INFOx() macros.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/mtd/spi-nor/core.h | 65 ----------------------------------------------
 1 file changed, 65 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index d0e83bfb847c..8f0f3c64488c 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -573,71 +573,6 @@ struct flash_info {
 		.n_regions = (_n_regions),				\
 	})
 
-#define SPI_NOR_ID_2ITEMS(_id) ((_id) >> 8) & 0xff, (_id) & 0xff
-#define SPI_NOR_ID_3ITEMS(_id) ((_id) >> 16) & 0xff, SPI_NOR_ID_2ITEMS(_id)
-
-#define SPI_NOR_ID(_jedec_id, _ext_id)					\
-	.id = &(const struct spi_nor_id){				\
-		.bytes = (const u8[]){ SPI_NOR_ID_3ITEMS(_jedec_id),	\
-				       SPI_NOR_ID_2ITEMS(_ext_id) },	\
-		.len = !(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0)),	\
-	}
-
-#define SPI_NOR_ID6(_jedec_id, _ext_id)					\
-	.id = &(const struct spi_nor_id){				\
-		.bytes = (const u8[]){ SPI_NOR_ID_3ITEMS(_jedec_id),	\
-				       SPI_NOR_ID_3ITEMS(_ext_id) },	\
-		.len = 6,						\
-	}
-
-#define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
-	.size = (_sector_size) * (_n_sectors),				\
-	.sector_size = (_sector_size == SZ_64K) ? 0 : (_sector_size),	\
-	.n_banks = (_n_banks)
-
-/* Used when the "_ext_id" is two bytes at most */
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
-	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
-
-#define INFO0(_sector_size, _n_sectors)					\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
-
-#define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
-	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), (_n_banks)),
-
-#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
-	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
-
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
-		.size = (_sector_size) * (_n_sectors),			\
-		.sector_size = (_sector_size),				\
-		.page_size = (_page_size),				\
-		.addr_nbytes = (_addr_nbytes),				\
-		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
-
-#define OTP_INFO(_len, _n_regions, _base, _offset)			\
-		.otp = &(const struct spi_nor_otp_organization){	\
-			.len = (_len),					\
-			.base = (_base),				\
-			.offset = (_offset),				\
-			.n_regions = (_n_regions),			\
-		},
-
-#define FLAGS(_flags)							\
-		.flags = (_flags),					\
-
-#define NO_SFDP_FLAGS(_no_sfdp_flags)					\
-		.no_sfdp_flags = (_no_sfdp_flags),			\
-
-#define FIXUP_FLAGS(_fixup_flags)					\
-		.fixup_flags = (_fixup_flags),				\
-
-#define MFR_FLAGS(_mfr_flags)						\
-		.mfr_flags = (_mfr_flags),				\
-
 /**
  * struct spi_nor_manufacturer - SPI NOR manufacturer object
  * @name: manufacturer name

-- 
2.39.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 06/41] mtd: spi-nor: default page_size to 256 bytes

[Miquel Raynal]

Hi Michael,

mwalle@kernel.org wrote on Mon, 07 Aug 2023 15:21:00 +0200:

> The INFO() macro always set the page_size to 256 bytes. Make that an
> optinal parameter. This default is a sane one for all older flashes,

optional

> newer ones will set the page size by its SFDP tables anyway.
> 
> Signed-off-by: Michael Walle <mwalle@kernel.org>
> ---
>  drivers/mtd/spi-nor/core.c | 7 +------
>  drivers/mtd/spi-nor/core.h | 8 ++++++--
>  2 files changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index c504a5af4032..138bc1e0a67c 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2017,11 +2017,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
>  static const struct flash_info spi_nor_generic_flash = {
>  	.name = "spi-nor-generic",
>  	.n_banks = 1,
> -	/*
> -	 * JESD216 rev A doesn't specify the page size, therefore we need a
> -	 * sane default.
> -	 */
> -	.page_size = 256,
>  	.parse_sfdp = true,
>  };
>  
> @@ -3000,7 +2995,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
>  	params->writesize = 1;
>  	params->size = info->size;
>  	params->bank_size = params->size;
> -	params->page_size = info->page_size;
> +	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;

Would you mind clarifying this? It does not look right, while
perhaps it is. But TBH, I have no idea what params->page_size will be
after this assignment.

>  
>  	if (!(info->flags & SPI_NOR_NO_FR)) {
>  		/* Default to Fast Read for DT and non-DT platform devices. */
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 12c35409493b..25bc18197614 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -10,6 +10,11 @@
>  #include "sfdp.h"
>  
>  #define SPI_NOR_MAX_ID_LEN	6
> +/*
> + * 256 bytes is a sane default for most older flashes. Newer flashes will
> + * have the page size defined within their SFDP tables.
> + */
> +#define SPI_NOR_DEFAULT_PAGE_SIZE 256
>  
>  /* Standard SPI NOR flash operations. */
>  #define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
> @@ -447,7 +452,7 @@ struct spi_nor_fixups {
>   * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
>   *                  isn't necessarily called a "sector" by the vendor.
>   * @n_banks:        the number of banks.
> - * @page_size:      the flash's page size.
> + * @page_size:      (optional) the flash's page size. Defaults to 256.
>   * @addr_nbytes:    number of address bytes to send.
>   *
>   * @parse_sfdp:     true when flash supports SFDP tables. The false value has no
> @@ -558,7 +563,6 @@ struct flash_info {
>  #define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
>  	.size = (_sector_size) * (_n_sectors),				\
>  	.sector_size = (_sector_size),					\
> -	.page_size = 256,						\
>  	.n_banks = (_n_banks)
>  
>  /* Used when the "_ext_id" is two bytes at most */
> 

Otherwise, lgtm.

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 07/41] mtd: spi-nor: store .n_banks in struct spi_nor_flash_parameter

[Miquel Raynal]

Hi Michael,

mwalle@kernel.org wrote on Mon, 07 Aug 2023 15:21:01 +0200:

> First, fixups might want to replace the n_banks parameter, thus we need
> it in the (writable) parameter struct. Secondly, this way we can have a
> default in the core and just skip setting the n_banks in the flash_info
> database. Most of the flashes doesn't have more than one bank.
> 
> Signed-off-by: Michael Walle <mwalle@kernel.org>
> ---
>  drivers/mtd/spi-nor/core.c | 7 ++++---
>  drivers/mtd/spi-nor/core.h | 2 ++
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index 138bc1e0a67c..ea94fb0da1e5 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2861,7 +2861,7 @@ static void spi_nor_init_flags(struct spi_nor *nor)
>  	if (flags & NO_CHIP_ERASE)
>  		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
>  
> -	if (flags & SPI_NOR_RWW && nor->info->n_banks > 1 &&
> +	if (flags & SPI_NOR_RWW && nor->params->n_banks > 1 &&
>  	    !nor->controller_ops)
>  		nor->flags |= SNOR_F_RWW;
>  }
> @@ -2925,8 +2925,8 @@ static int spi_nor_late_init_params(struct spi_nor *nor)
>  	if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
>  		spi_nor_init_default_locking_ops(nor);
>  
> -	if (nor->info->n_banks > 1)
> -		params->bank_size = div64_u64(params->size, nor->info->n_banks);
> +	if (params->n_banks > 1)
> +		params->bank_size = div64_u64(params->size, params->n_banks);
>  
>  	return 0;
>  }
> @@ -2996,6 +2996,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
>  	params->size = info->size;
>  	params->bank_size = params->size;
>  	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
> +	params->n_banks = info->n_banks;
>  
>  	if (!(info->flags & SPI_NOR_NO_FR)) {
>  		/* Default to Fast Read for DT and non-DT platform devices. */
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 25bc18197614..fe1ce232a6c8 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -358,6 +358,7 @@ struct spi_nor_otp {
>   *			in octal DTR mode.
>   * @rdsr_addr_nbytes:	dummy address bytes needed for Read Status Register
>   *			command in octal DTR mode.
> + * @n_banks:		the number of banks.

just "number of banks" would make it, but that's nitpicking.

>   * @n_dice:		number of dice in the flash memory.
>   * @vreg_offset:	volatile register offset for each die.
>   * @hwcaps:		describes the read and page program hardware
> @@ -394,6 +395,7 @@ struct spi_nor_flash_parameter {
>  	u8				addr_mode_nbytes;
>  	u8				rdsr_dummy;
>  	u8				rdsr_addr_nbytes;
> +	u8				n_banks;
>  	u8				n_dice;
>  	u32				*vreg_offset;
>  
> 

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 08/41] mtd: spi-nor: default .n_banks to 1

[Miquel Raynal]

Hi Michael,

mwalle@kernel.org wrote on Mon, 07 Aug 2023 15:21:02 +0200:

> If .n_banks is not set in the flash_info database, the default value
> should be 1. This way, we don't have to always set the .n_banks
> parameter in flash_info.
> 
> Signed-off-by: Michael Walle <mwalle@kernel.org>
> ---
>  drivers/mtd/spi-nor/core.c   | 3 +--
>  drivers/mtd/spi-nor/core.h   | 8 ++++----
>  drivers/mtd/spi-nor/xilinx.c | 1 -
>  3 files changed, 5 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index ea94fb0da1e5..015152ba8973 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2016,7 +2016,6 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
>  
>  static const struct flash_info spi_nor_generic_flash = {
>  	.name = "spi-nor-generic",
> -	.n_banks = 1,
>  	.parse_sfdp = true,
>  };
>  
> @@ -2996,7 +2995,7 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
>  	params->size = info->size;
>  	params->bank_size = params->size;
>  	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
> -	params->n_banks = info->n_banks;
> +	params->n_banks = info->n_banks ?: SPI_NOR_DEFAULT_N_BANKS;

Same here, I'm not against ternary operators at all, but the 

	? /* nothing */ : <something>

form is strange.

>  
>  	if (!(info->flags & SPI_NOR_NO_FR)) {
>  		/* Default to Fast Read for DT and non-DT platform devices. */
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index fe1ce232a6c8..c90445e186c0 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -15,6 +15,7 @@
>   * have the page size defined within their SFDP tables.
>   */
>  #define SPI_NOR_DEFAULT_PAGE_SIZE 256
> +#define SPI_NOR_DEFAULT_N_BANKS 1
>  
>  /* Standard SPI NOR flash operations. */
>  #define SPI_NOR_READID_OP(naddr, ndummy, buf, len)			\
> @@ -453,7 +454,7 @@ struct spi_nor_fixups {
>   * @size:           the size of the flash in bytes.
>   * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
>   *                  isn't necessarily called a "sector" by the vendor.
> - * @n_banks:        the number of banks.
> + * @n_banks:        (optional) the number of banks. Defaults to 1.
>   * @page_size:      (optional) the flash's page size. Defaults to 256.
>   * @addr_nbytes:    number of address bytes to send.
>   *
> @@ -570,7 +571,7 @@ struct flash_info {
>  /* Used when the "_ext_id" is two bytes at most */
>  #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
>  	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
> -	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
> +	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
>  
>  #define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
>  	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
> @@ -578,13 +579,12 @@ struct flash_info {
>  
>  #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
>  	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
> -	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
> +	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 0),
>  
>  #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
>  		.size = (_sector_size) * (_n_sectors),			\
>  		.sector_size = (_sector_size),				\
>  		.page_size = (_page_size),				\
> -		.n_banks = 1,						\
>  		.addr_nbytes = (_addr_nbytes),				\
>  		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
>  
> diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
> index 284e2e4970ab..8d4539e32dfe 100644
> --- a/drivers/mtd/spi-nor/xilinx.c
> +++ b/drivers/mtd/spi-nor/xilinx.c
> @@ -26,7 +26,6 @@
>  		.size = 8 * (_page_size) * (_n_sectors),		\
>  		.sector_size = (8 * (_page_size)),			\
>  		.page_size = (_page_size),				\
> -		.n_banks = 1,						\
>  		.flags = SPI_NOR_NO_FR
>  
>  /* Xilinx S3AN share MFR with Atmel SPI NOR */
> 

But otherwise

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 06/41] mtd: spi-nor: default page_size to 256 bytes

[Michael Walle]

Hi Miquel,

>> +	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
> 
> Would you mind clarifying this? It does not look right, while
> perhaps it is. But TBH, I have no idea what params->page_size will be
> after this assignment.

It's info->page_size, it's a shortcut [1].

I'm not the first one using it (in fact I was explicitly asked to use 
it,
e.g. in gpio subsys):

$ grep -r "?:" **/*.c |wc -l
1268

-michael

[1] https://en.wikipedia.org/wiki/Elvis_operator

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 06/41] mtd: spi-nor: default page_size to 256 bytes

[Miquel Raynal]

Hi Michael,

michael@walle.cc wrote on Mon, 07 Aug 2023 16:29:38 +0200:

> Hi Miquel,
> 
> >> +	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;  
> > 
> > Would you mind clarifying this? It does not look right, while
> > perhaps it is. But TBH, I have no idea what params->page_size will be
> > after this assignment.  
> 
> It's info->page_size, it's a shortcut [1].

Elvis operator :')

> I'm not the first one using it (in fact I was explicitly asked to use it,
> e.g. in gpio subsys):
> 
> $ grep -r "?:" **/*.c |wc -l
> 1268

Okay then... I didn't know this was encouraged.

> -michael
> 
> [1] https://en.wikipedia.org/wiki/Elvis_operator

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 01/41] mtd: spi-nor: remove catalyst 'flashes'

[kernel test robot]

Hi Michael,

kernel test robot noticed the following build errors:

[auto build test ERROR on f7dc24b3413851109c4047b22997bd0d95ed52a2]

url:    https://github.com/intel-lab-lkp/linux/commits/Michael-Walle/mtd-spi-nor-remove-catalyst-flashes/20230807-213321
base:   f7dc24b3413851109c4047b22997bd0d95ed52a2
patch link:    https://lore.kernel.org/r/20230807-mtd-flash-info-db-rework-v1-1-3d3d5bef4ba4%40kernel.org
patch subject: [PATCH 01/41] mtd: spi-nor: remove catalyst 'flashes'
config: powerpc-allmodconfig (https://download.01.org/0day-ci/archive/20230808/202308081547.u3Nmtq1F-lkp@intel.com/config)
compiler: powerpc-linux-gcc (GCC) 12.3.0
reproduce: (https://download.01.org/0day-ci/archive/20230808/202308081547.u3Nmtq1F-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202308081547.u3Nmtq1F-lkp@intel.com/

All errors (new ones prefixed by >>):

>> make[6]: *** No rule to make target 'drivers/mtd/spi-nor/catalyst.o', needed by 'drivers/mtd/spi-nor/spi-nor.o'.
   make[6]: Target 'drivers/mtd/spi-nor/' not remade because of errors.

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 02/41] mtd: spi-nor: remove Fujitsu MB85RS1MT support

[kernel test robot]

Hi Michael,

kernel test robot noticed the following build errors:

[auto build test ERROR on f7dc24b3413851109c4047b22997bd0d95ed52a2]

url:    https://github.com/intel-lab-lkp/linux/commits/Michael-Walle/mtd-spi-nor-remove-catalyst-flashes/20230807-213321
base:   f7dc24b3413851109c4047b22997bd0d95ed52a2
patch link:    https://lore.kernel.org/r/20230807-mtd-flash-info-db-rework-v1-2-3d3d5bef4ba4%40kernel.org
patch subject: [PATCH 02/41] mtd: spi-nor: remove Fujitsu MB85RS1MT support
config: powerpc-allmodconfig (https://download.01.org/0day-ci/archive/20230808/202308081613.cFbUU2bQ-lkp@intel.com/config)
compiler: powerpc-linux-gcc (GCC) 12.3.0
reproduce: (https://download.01.org/0day-ci/archive/20230808/202308081613.cFbUU2bQ-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202308081613.cFbUU2bQ-lkp@intel.com/

All errors (new ones prefixed by >>):

>> make[6]: *** No rule to make target 'drivers/mtd/spi-nor/fujitsu.o', needed by 'drivers/mtd/spi-nor/spi-nor.o'.
   make[6]: Target 'drivers/mtd/spi-nor/' not remade because of errors.

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 00/41] mtd: spi-nor: clean the flash_info database up

[Tudor Ambarus]

Hi, Michael,

I skimmed over the patches, the idea is good as I already said.
When do you aim to have these integrated, now or after -rc1 is out?
After -rc1 is more conservative, as if there are problems, we'll have
more time to fix them. Either way is good for me as long as you're around
to fix possible problems, but I'd like some timeframe to know when to
invest time in reviewing all. We're at -rc5.

Cheers,
ta

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 00/41] mtd: spi-nor: clean the flash_info database up

[Michael Walle]

Hi Tudor,

Am 2023-08-08 11:21, schrieb Tudor Ambarus:
> I skimmed over the patches, the idea is good as I already said.
> When do you aim to have these integrated, now or after -rc1 is out?
> After -rc1 is more conservative, as if there are problems, we'll have
> more time to fix them. Either way is good for me as long as you're 
> around
> to fix possible problems, but I'd like some timeframe to know when to
> invest time in reviewing all. We're at -rc5.

After -rc1 is out is fine. I just need to track the flash_info additions
until then.

-michael

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 01/41] mtd: spi-nor: remove catalyst 'flashes'

[kernel test robot]

Hi Michael,

kernel test robot noticed the following build errors:

[auto build test ERROR on f7dc24b3413851109c4047b22997bd0d95ed52a2]

url:    https://github.com/intel-lab-lkp/linux/commits/Michael-Walle/mtd-spi-nor-remove-catalyst-flashes/20230807-213321
base:   f7dc24b3413851109c4047b22997bd0d95ed52a2
patch link:    https://lore.kernel.org/r/20230807-mtd-flash-info-db-rework-v1-1-3d3d5bef4ba4%40kernel.org
patch subject: [PATCH 01/41] mtd: spi-nor: remove catalyst 'flashes'
config: mips-allyesconfig (https://download.01.org/0day-ci/archive/20230809/202308090236.poj47Yz8-lkp@intel.com/config)
compiler: mips-linux-gcc (GCC) 12.3.0
reproduce: (https://download.01.org/0day-ci/archive/20230809/202308090236.poj47Yz8-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202308090236.poj47Yz8-lkp@intel.com/

All errors (new ones prefixed by >>):

>> make[6]: *** No rule to make target 'drivers/mtd/spi-nor/catalyst.o', needed by 'drivers/mtd/spi-nor/built-in.a'.
   make[6]: Target 'drivers/mtd/spi-nor/' not remade because of errors.

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/