From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Cc: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
<linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>,
<kernel@sberdevices.ru>
Subject: Re: [PATCH v2 2/2] mtd: spinand: micron: fixing the offset for OOB
Date: Tue, 22 Aug 2023 15:35:56 +0200 [thread overview]
Message-ID: <20230822153556.630e65b9@xps-13> (raw)
In-Reply-To: <20230822122534.872646-3-mmkurbanov@sberdevices.ru>
Hi Martin,
mmkurbanov@sberdevices.ru wrote on Tue, 22 Aug 2023 15:25:34 +0300:
> The first 4 bytes are reserved for bad block data.
Are you sure about that? I've never seen 4-bytes BBM.
> Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
> ---
> drivers/mtd/nand/spi/micron.c | 20 +++++++++++++++++---
> 1 file changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
> index 12601bc4227a..64b41c7c9cce 100644
> --- a/drivers/mtd/nand/spi/micron.c
> +++ b/drivers/mtd/nand/spi/micron.c
> @@ -57,6 +57,20 @@ static SPINAND_OP_VARIANTS(x1_write_cache_variants,
> static SPINAND_OP_VARIANTS(x1_update_cache_variants,
> SPINAND_PROG_LOAD(false, 0, NULL, 0));
>
> +/*
> + * OOB spare area map (128 and 256 bytes)
> + *
> + * +-----+-----------------+-------------------+---------------------+
> + * | BBM | Non ECC | ECC protected | ECC Area |
> + * | | protected Area | Area | |
> + * ----------+-----+-----------------+-------------------+---------------------+
> + * oobsize | 0:3 | 4:31 (28 bytes) | 32:63 (32 bytes) | 64:127 (64 bytes) |
> + * 128 bytes | | | | |
> + * ----------+-----+-----------------+-------------------+---------------------+
> + * oobsize | 0:3 | 4:63 (60 bytes) | 64:127 (64 bytes) | 127:255 (128 bytes) |
> + * 256 bytes | | | | |
> + * ----------+-----+-----------------+-------------------+---------------------+
> + */
> static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
> struct mtd_oob_region *region)
> {
> @@ -75,9 +89,9 @@ static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
> if (section)
> return -ERANGE;
>
> - /* Reserve 2 bytes for the BBM. */
> - region->offset = 2;
> - region->length = (mtd->oobsize / 2) - 2;
> + /* Reserve 4 bytes for the BBM. */
> + region->offset = 4;
> + region->length = (mtd->oobsize / 2) - 4;
>
> return 0;
> }
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2023-08-22 13:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-22 12:25 [PATCH v2 0/2] mtd: spinand: micron: correct parameters Martin Kurbanov
2023-08-22 12:25 ` [PATCH v2 1/2] mtd: spinand: micron: correct bitmask for ecc status Martin Kurbanov
2023-08-22 12:30 ` Frieder Schrempf
2023-08-22 12:25 ` [PATCH v2 2/2] mtd: spinand: micron: fixing the offset for OOB Martin Kurbanov
2023-08-22 12:32 ` Frieder Schrempf
2023-08-22 13:35 ` Miquel Raynal [this message]
2023-08-22 16:57 ` Martin Kurbanov
2023-08-23 8:41 ` Miquel Raynal
2023-08-23 11:33 ` Martin Kurbanov
2023-08-23 11:39 ` Miquel Raynal
2023-08-24 9:35 ` Martin Kurbanov
2023-09-04 14:20 ` Martin Kurbanov
2023-09-04 14:31 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230822153556.630e65b9@xps-13 \
--to=miquel.raynal@bootlin.com \
--cc=kernel@sberdevices.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mmkurbanov@sberdevices.ru \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox