From: Jaime Liao <jaimeliao.tw@gmail.com>
To: linux-mtd@lists.infradead.org, tudor.ambarus@linaro.org,
pratyush@kernel.org, michael@walle.cc, miquel.raynal@bootlin.com
Cc: leoyu@mxic.com.tw, jaimeliao@mxic.com.tw
Subject: [PATCH v2 1/1] mtd: spi-nor: sfdp: Get the 1-1-8 protocol from BFPT
Date: Thu, 14 Dec 2023 15:33:44 +0800 [thread overview]
Message-ID: <20231214073344.66644-2-jaimeliao.tw@gmail.com> (raw)
In-Reply-To: <20231214073344.66644-1-jaimeliao.tw@gmail.com>
From: JaimeLiao <jaimeliao@mxic.com.tw>
BFPT 17th DWORD contains the informations about 1-1-8,
Parse BFPT 17 DWORD instruction to determine
whether flash support 1-1-8, and set its dummy cycle
accordingly.
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
---
drivers/mtd/spi-nor/sfdp.c | 13 ++++++++++++-
drivers/mtd/spi-nor/sfdp.h | 3 +++
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index b3b11dfed789..c55f39978762 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -446,6 +446,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
u32 dword;
u16 half;
u8 erase_mask;
+ u8 dummy, opcode;
/* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
@@ -525,7 +526,6 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
u32 erasesize;
- u8 opcode;
half = bfpt.dwords[er->dword] >> er->shift;
erasesize = half & 0xff;
@@ -631,6 +631,16 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt);
+ /* Parse 1-1-8 read instruction */
+ opcode = FIELD_GET(BFPT_DWORD17_RD_1_1_8_CMD, bfpt.dwords[SFDP_DWORD(17)]);
+ if (opcode) {
+ dummy = FIELD_GET(BFPT_DWORD17_RD_1_1_8_DUMMY, bfpt.dwords[SFDP_DWORD(17)]);
+ nor->params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+ spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_1_1_8],
+ 0, dummy, opcode,
+ SNOR_PROTO_1_1_8);
+ }
+
/* 8D-8D-8D command extension. */
switch (bfpt.dwords[SFDP_DWORD(18)] & BFPT_DWORD18_CMD_EXT_MASK) {
case BFPT_DWORD18_CMD_EXT_REP:
@@ -968,6 +978,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
{ SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) },
{ SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) },
{ SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) },
+ { SNOR_HWCAPS_READ_1_1_8, BIT(20) },
};
static const struct sfdp_4bait programs[] = {
{ SNOR_HWCAPS_PP, BIT(6) },
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
index 6eb99e1cdd61..584a05f9931d 100644
--- a/drivers/mtd/spi-nor/sfdp.h
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -118,6 +118,9 @@ struct sfdp_bfpt {
(BFPT_DWORD16_EN4B_EN4B | BFPT_DWORD16_EX4B_EX4B)
#define BFPT_DWORD16_SWRST_EN_RST BIT(12)
+#define BFPT_DWORD17_RD_1_1_8_CMD GENMASK(31, 24)
+#define BFPT_DWORD17_RD_1_1_8_DUMMY GENMASK(20, 16)
+
#define BFPT_DWORD18_CMD_EXT_MASK GENMASK(30, 29)
#define BFPT_DWORD18_CMD_EXT_REP (0x0UL << 29) /* Repeat */
#define BFPT_DWORD18_CMD_EXT_INV (0x1UL << 29) /* Invert */
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2023-12-14 7:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 7:33 [PATCH v2 0/1] Get the 1-1-8 protocol from BFPT Jaime Liao
2023-12-14 7:33 ` Jaime Liao [this message]
2023-12-14 9:48 ` [PATCH v2 1/1] mtd: spi-nor: sfdp: " Michael Walle
2023-12-14 10:06 ` liao jaime
2023-12-14 10:09 ` Michael Walle
2023-12-14 10:11 ` liao jaime
2023-12-15 6:45 ` Tudor Ambarus
2023-12-15 6:59 ` liao jaime
2023-12-15 7:12 ` Tudor Ambarus
2023-12-15 7:27 ` liao jaime
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231214073344.66644-2-jaimeliao.tw@gmail.com \
--to=jaimeliao.tw@gmail.com \
--cc=jaimeliao@mxic.com.tw \
--cc=leoyu@mxic.com.tw \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=pratyush@kernel.org \
--cc=tudor.ambarus@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox