public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: David Regan <dregan@broadcom.com>
To: dregan@broadcom.com, dregan@mail.com, miquel.raynal@bootlin.com,
	richard@nod.at, vigneshr@ti.com, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	computersforpeace@gmail.com, kdasu.kdev@gmail.com,
	linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, joel.peshkin@broadcom.com,
	tomer.yacoby@broadcom.com, dan.beygelman@broadcom.com,
	william.zhang@broadcom.com, anand.gore@broadcom.com,
	kursad.oney@broadcom.com, florian.fainelli@broadcom.com,
	rafal@milecki.pl, bcm-kernel-feedback-list@broadcom.com,
	andre.przywara@arm.com, baruch@tkos.co.il,
	linux-arm-kernel@lists.infradead.org, dan.carpenter@linaro.org
Subject: [PATCH v3 03/10] arm64: dts: broadcom: bcmbca: Add NAND controller node
Date: Tue, 23 Jan 2024 19:04:51 -0800	[thread overview]
Message-ID: <20240124030458.98408-4-dregan@broadcom.com> (raw)
In-Reply-To: <20240124030458.98408-1-dregan@broadcom.com>

From: William Zhang <william.zhang@broadcom.com>

Add support for Broadcom STB NAND controller in BCMBCA ARMv8 chip dts
files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
---
Changes in v3: None
---
Changes in v2:
- Add nand controller node label for 4908 so it is consistent with other
SoCs and can be referenced by board dts file
---
 .../arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi |  5 ++++-
 .../arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi | 17 +++++++++++++++++
 .../boot/dts/broadcom/bcmbca/bcm63146.dtsi      | 17 +++++++++++++++++
 .../boot/dts/broadcom/bcmbca/bcm63158.dtsi      | 17 +++++++++++++++++
 .../arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi | 17 +++++++++++++++++
 .../arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi | 17 +++++++++++++++++
 .../arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi | 17 +++++++++++++++++
 .../arm64/boot/dts/broadcom/bcmbca/bcm94912.dts |  4 ++++
 .../boot/dts/broadcom/bcmbca/bcm963146.dts      |  4 ++++
 .../boot/dts/broadcom/bcmbca/bcm963158.dts      |  4 ++++
 .../arm64/boot/dts/broadcom/bcmbca/bcm96813.dts |  4 ++++
 .../arm64/boot/dts/broadcom/bcmbca/bcm96856.dts |  4 ++++
 .../arm64/boot/dts/broadcom/bcmbca/bcm96858.dts |  4 ++++
 13 files changed, 130 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027bbf..03a516d02501 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -589,7 +589,7 @@ hsspi: spi@1000 {
 			status = "disabled";
 		};
 
-		nand-controller@1800 {
+		nand_controller: nand-controller@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
@@ -597,11 +597,14 @@ nand-controller@1800 {
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand_ctlrdy";
+			brcm,nand-use-wp = <0>;
 			status = "okay";
 
 			nandcs: nand@0 {
 				compatible = "brcm,nandcs";
 				reg = <0>;
+				nand-on-flash-bbt;
+				brcm,nand-ecc-use-strap;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
index d658c81f7285..92a829542467 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -138,6 +138,23 @@ hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			brcm,nand-use-wp = <0>;
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+				nand-on-flash-bbt;
+				brcm,nand-ecc-use-strap;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
index 4f474d47022e..2283fd81ece6 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -119,6 +119,23 @@ hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			brcm,nand-use-wp = <0>;
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+				nand-on-flash-bbt;
+				brcm,nand-ecc-use-strap;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
index 909f254dc47d..c70177066a15 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -137,6 +137,23 @@ hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			brcm,nand-use-wp = <0>;
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+				nand-on-flash-bbt;
+				brcm,nand-ecc-use-strap;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
index 685ae32951c9..09115e3af694 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -138,6 +138,23 @@ hsspi: spi@1000 {
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			brcm,nand-use-wp = <0>;
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+				nand-on-flash-bbt;
+				brcm,nand-ecc-use-strap;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
index 820553ce541b..03ed65b35dbc 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -119,5 +119,22 @@ hsspi: spi@1000 {
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			brcm,nand-use-wp = <0>;
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+				nand-on-flash-bbt;
+				brcm,nand-ecc-use-strap;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
index 0eb93c298297..36f1fc06fcec 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -156,5 +156,22 @@ hsspi: spi@1000 {
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			brcm,nand-use-wp = <0>;
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+				nand-on-flash-bbt;
+				brcm,nand-ecc-use-strap;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
index e69cd683211a..4d1ea501e384 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -32,3 +32,7 @@ &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
index db2c82d6dfd8..810b5a23da7b 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -32,3 +32,7 @@ &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
index 25c12bc63545..3aaae5dbb568 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -32,3 +32,7 @@ &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
index faba21f03120..6b167cc2af76 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -32,3 +32,7 @@ &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
index 9808331eede2..d598cd618b57 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -32,3 +32,7 @@ &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
index 1f561c8e13b0..e50ddbf6f58c 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -32,3 +32,7 @@ &uart0 {
 &hsspi {
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+};
-- 
2.37.3


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2024-01-24  3:07 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-24  3:04 [PATCH v3 00/10] mtd: rawnand: brcmnand: driver and doc updates David Regan
2024-01-24  3:04 ` [PATCH v3 01/10] dt-bindings: mtd: brcmnand: Updates for bcmbca SoCs David Regan
2024-01-24 17:24   ` Conor Dooley
2024-01-25  3:01     ` William Zhang
2024-01-25 19:51       ` Conor Dooley
2024-01-26  1:55         ` William Zhang
2024-01-26 16:46           ` Conor Dooley
2024-01-26 18:09             ` William Zhang
2024-01-24 17:24   ` Conor Dooley
2024-01-24 17:34   ` Miquel Raynal
2024-01-25  3:14     ` William Zhang
2024-01-24  3:04 ` [PATCH v3 02/10] ARM: dts: broadcom: bcmbca: Add NAND controller node David Regan
2024-01-24 17:30   ` Miquel Raynal
2024-01-25  3:09     ` William Zhang
2024-01-25  3:34       ` Florian Fainelli
2024-01-25  5:53         ` William Zhang
2024-01-25  9:20           ` Miquel Raynal
2024-01-25 18:14             ` William Zhang
2024-01-24  3:04 ` David Regan [this message]
2024-01-24  3:04 ` [PATCH v3 04/10] mtd: rawnand: brcmnand: Rename bcm63138 nand driver David Regan
2024-01-24  3:04 ` [PATCH v3 05/10] mtd: rawnand: brcmnand: Add BCMBCA read data bus interface David Regan
2024-01-24  3:04 ` [PATCH v3 06/10] mtd: rawnand: brcmnand: Add support for getting ecc setting from strap David Regan
2024-01-24 17:32   ` Miquel Raynal
2024-01-25  3:13     ` William Zhang
2024-01-24  3:04 ` [PATCH v3 07/10] mtd: rawnand: brcmnand: Support write protection setting from dts David Regan
2024-01-24  3:04 ` [PATCH v3 08/10] mtd: rawnand: brcmnand: exec_op helper functions return type fixes David Regan
2024-01-24 17:35   ` Miquel Raynal
2024-01-24  3:04 ` [PATCH v3 09/10] mtd: rawnand: brcmnand: update log level messages David Regan
2024-01-24 17:37   ` Miquel Raynal
2024-01-25 18:47     ` David Regan
2024-01-24  3:04 ` [PATCH v3 10/10] mtd: rawnand: brcmnand: allow for on-die ecc David Regan
2024-01-24 17:40   ` Miquel Raynal
2024-01-25 19:47     ` David Regan
2024-01-26  6:19       ` Miquel Raynal
2024-01-26 19:57         ` David Regan
2024-01-29 10:52           ` Miquel Raynal
2024-01-30  8:11             ` William Zhang
2024-01-30 11:01               ` Miquel Raynal
2024-01-30 15:26                 ` David Regan
2024-01-30 18:55                   ` Miquel Raynal
2024-02-01  6:48                     ` William Zhang
2024-02-01  8:25                       ` Miquel Raynal
2024-02-01 18:53                         ` William Zhang
2024-02-02 17:38                         ` David Regan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240124030458.98408-4-dregan@broadcom.com \
    --to=dregan@broadcom.com \
    --cc=anand.gore@broadcom.com \
    --cc=andre.przywara@arm.com \
    --cc=baruch@tkos.co.il \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=computersforpeace@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=dan.beygelman@broadcom.com \
    --cc=dan.carpenter@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dregan@mail.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=joel.peshkin@broadcom.com \
    --cc=kdasu.kdev@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kursad.oney@broadcom.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=tomer.yacoby@broadcom.com \
    --cc=vigneshr@ti.com \
    --cc=william.zhang@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox