public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <tudor.ambarus@linaro.org>,
	Pratyush Yadav <pratyush@kernel.org>,
	Michael Walle <michael@walle.cc>, <linux-mtd@lists.infradead.org>
Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Julien Su" <juliensu@mxic.com.tw>,
	"Jaime Liao" <jaimeliao@mxic.com.tw>,
	"Jaime Liao" <jaimeliao.tw@gmail.com>,
	"Alvin Zhou" <alvinzhou@mxic.com.tw>,
	"Christophe Kerello" <christophe.kerello@foss.st.com>,
	eagle.alexander923@gmail.com, mans@mansr.com, martin@geanix.com,
	"Sean Nyekjær" <sean@geanix.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	stable@vger.kernel.org
Subject: [PATCH 1/3] mtd: rawnand: Fix and simplify again the continuous read derivations
Date: Fri, 23 Feb 2024 12:55:43 +0100	[thread overview]
Message-ID: <20240223115545.354541-2-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20240223115545.354541-1-miquel.raynal@bootlin.com>

We need to avoid the first page if we don't read it entirely.
We need to avoid the last page if we don't read it entirely.
While rather simple, this logic has been failed in the previous
fix. This time I wrote about 30 unit tests locally to check each
possible condition, hopefully I covered them all.

Reported-by: Christophe Kerello <christophe.kerello@foss.st.com>
Closes: https://lore.kernel.org/linux-mtd/20240221175327.42f7076d@xps-13/T/#m399bacb10db8f58f6b1f0149a1df867ec086bb0a
Suggested-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 828f6df1bcba ("mtd: rawnand: Clarify conditions to enable continuous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/nand_base.c | 38 ++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 3b3ce2926f5d..bcfd99a1699f 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -3466,30 +3466,36 @@ static void rawnand_enable_cont_reads(struct nand_chip *chip, unsigned int page,
 				      u32 readlen, int col)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	unsigned int end_page, end_col;
+	unsigned int first_page, last_page;
 
 	chip->cont_read.ongoing = false;
 
 	if (!chip->controller->supported_op.cont_read)
 		return;
 
-	end_page = DIV_ROUND_UP(col + readlen, mtd->writesize);
-	end_col = (col + readlen) % mtd->writesize;
+	/*
+	 * Don't bother making any calculations if the length is too small.
+	 * Side effect: avoids possible integer underflows below.
+	 */
+	if (readlen < (2 * mtd->writesize))
+		return;
 
+	/* Derive the page where continuous read should start (the first full page read) */
+	first_page = page;
 	if (col)
-		page++;
-
-	if (end_col && end_page)
-		end_page--;
-
-	if (page + 1 > end_page)
-		return;
-
-	chip->cont_read.first_page = page;
-	chip->cont_read.last_page = end_page;
-	chip->cont_read.ongoing = true;
-
-	rawnand_cap_cont_reads(chip);
+		first_page++;
+
+	/* Derive the page where continuous read should stop (the last full page read) */
+	last_page = page + ((col + readlen) / mtd->writesize) - 1;
+
+	/* Configure and enable continuous read when suitable */
+	if (first_page < last_page) {
+		chip->cont_read.first_page = first_page;
+		chip->cont_read.last_page = last_page;
+		chip->cont_read.ongoing = true;
+		/* May reset the ongoing flag */
+		rawnand_cap_cont_reads(chip);
+	}
 }
 
 static void rawnand_cont_read_skip_first_page(struct nand_chip *chip, unsigned int page)
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2024-02-23 11:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-23 11:55 [PATCH 0/3] mtd: rawnand: More continuous read fixes Miquel Raynal
2024-02-23 11:55 ` Miquel Raynal [this message]
2024-03-01 17:48   ` [PATCH 1/3] mtd: rawnand: Fix and simplify again the continuous read derivations Christophe Kerello
2024-03-07 17:28   ` Miquel Raynal
2024-02-23 11:55 ` [PATCH 2/3] mtd: rawnand: Add a helper for calculating a page index Miquel Raynal
2024-02-23 11:55 ` [PATCH 3/3] mtd: rawnand: Ensure all continuous terms are always in sync Miquel Raynal
2024-03-07 17:28   ` Miquel Raynal
2024-02-26 14:28 ` [PATCH 0/3] mtd: rawnand: More continuous read fixes Christophe Kerello
2024-02-29 10:46   ` Miquel Raynal
2024-03-04 10:44     ` Christophe Kerello
2024-03-07 11:52       ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240223115545.354541-2-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=alvinzhou@mxic.com.tw \
    --cc=christophe.kerello@foss.st.com \
    --cc=eagle.alexander923@gmail.com \
    --cc=jaimeliao.tw@gmail.com \
    --cc=jaimeliao@mxic.com.tw \
    --cc=juliensu@mxic.com.tw \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mans@mansr.com \
    --cc=martin@geanix.com \
    --cc=michael@walle.cc \
    --cc=pratyush@kernel.org \
    --cc=richard@nod.at \
    --cc=sean@geanix.com \
    --cc=stable@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tudor.ambarus@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox