linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Bastien Curutchet <bastien.curutchet@bootlin.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH 3/3] mtd: rawnand: davinci: use generic device property helpers
Date: Mon,  7 Oct 2024 14:23:50 +0200	[thread overview]
Message-ID: <20241007122350.75285-3-brgl@bgdev.pl> (raw)
In-Reply-To: <20241007122350.75285-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

There's no reason for this driver to be using OF-specific property
accessors. Switch to using generic device property interfaces and
replace the of.h include with property.h. This allows us to no longer
check the existence of the associated of_node.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/mtd/nand/raw/davinci_nand.c | 42 ++++++++++++++---------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 6c884b59bc98..aa7619eec59e 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/rawnand.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 
 #define NRCSR_OFFSET		0x00
@@ -490,7 +490,7 @@ MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
 static struct davinci_nand_pdata *
 nand_davinci_get_pdata(struct platform_device *pdev)
 {
-	if (!dev_get_platdata(&pdev->dev) && pdev->dev.of_node) {
+	if (!dev_get_platdata(&pdev->dev)) {
 		struct davinci_nand_pdata *pdata;
 		const char *mode;
 		u32 prop;
@@ -501,23 +501,24 @@ nand_davinci_get_pdata(struct platform_device *pdev)
 		pdev->dev.platform_data = pdata;
 		if (!pdata)
 			return ERR_PTR(-ENOMEM);
-		if (!of_property_read_u32(pdev->dev.of_node,
-			"ti,davinci-chipselect", &prop))
+		if (!device_property_read_u32(&pdev->dev,
+					      "ti,davinci-chipselect", &prop))
 			pdata->core_chipsel = prop;
 		else
 			return ERR_PTR(-EINVAL);
 
-		if (!of_property_read_u32(pdev->dev.of_node,
-			"ti,davinci-mask-ale", &prop))
+		if (!device_property_read_u32(&pdev->dev,
+					      "ti,davinci-mask-ale", &prop))
 			pdata->mask_ale = prop;
-		if (!of_property_read_u32(pdev->dev.of_node,
-			"ti,davinci-mask-cle", &prop))
+		if (!device_property_read_u32(&pdev->dev,
+					      "ti,davinci-mask-cle", &prop))
 			pdata->mask_cle = prop;
-		if (!of_property_read_u32(pdev->dev.of_node,
-			"ti,davinci-mask-chipsel", &prop))
+		if (!device_property_read_u32(&pdev->dev,
+					      "ti,davinci-mask-chipsel", &prop))
 			pdata->mask_chipsel = prop;
-		if (!of_property_read_string(pdev->dev.of_node,
-			"ti,davinci-ecc-mode", &mode)) {
+		if (!device_property_read_string(&pdev->dev,
+						 "ti,davinci-ecc-mode",
+						 &mode)) {
 			if (!strncmp("none", mode, 4))
 				pdata->engine_type = NAND_ECC_ENGINE_TYPE_NONE;
 			if (!strncmp("soft", mode, 4))
@@ -525,16 +526,17 @@ nand_davinci_get_pdata(struct platform_device *pdev)
 			if (!strncmp("hw", mode, 2))
 				pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 		}
-		if (!of_property_read_u32(pdev->dev.of_node,
-			"ti,davinci-ecc-bits", &prop))
+		if (!device_property_read_u32(&pdev->dev,
+					      "ti,davinci-ecc-bits", &prop))
 			pdata->ecc_bits = prop;
 
-		if (!of_property_read_u32(pdev->dev.of_node,
-			"ti,davinci-nand-buswidth", &prop) && prop == 16)
+		if (!device_property_read_u32(&pdev->dev,
+					      "ti,davinci-nand-buswidth",
+					      &prop) && prop == 16)
 			pdata->options |= NAND_BUSWIDTH_16;
 
-		if (of_property_read_bool(pdev->dev.of_node,
-			"ti,davinci-nand-use-bbt"))
+		if (device_property_read_bool(&pdev->dev,
+					      "ti,davinci-nand-use-bbt"))
 			pdata->bbt_options = NAND_BBT_USE_FLASH;
 
 		/*
@@ -548,10 +550,8 @@ nand_davinci_get_pdata(struct platform_device *pdev)
 		 * then use "ti,davinci-nand" as the compatible in your
 		 * device-tree file.
 		 */
-		if (of_device_is_compatible(pdev->dev.of_node,
-					    "ti,keystone-nand")) {
+		if (device_is_compatible(&pdev->dev, "ti,keystone-nand"))
 			pdata->options |= NAND_NO_SUBPAGE_WRITE;
-		}
 	}
 
 	return dev_get_platdata(&pdev->dev);
-- 
2.43.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2024-10-07 12:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-07 12:23 [PATCH 1/3] mtd: rawnand: davinci: order headers alphabetically Bartosz Golaszewski
2024-10-07 12:23 ` [PATCH 2/3] mtd: rawnand: davinci: break the line correctly Bartosz Golaszewski
2024-10-21 10:02   ` Miquel Raynal
2024-10-07 12:23 ` Bartosz Golaszewski [this message]
2024-10-21 10:02   ` [PATCH 3/3] mtd: rawnand: davinci: use generic device property helpers Miquel Raynal
2024-10-21  7:25 ` [PATCH 1/3] mtd: rawnand: davinci: order headers alphabetically Bartosz Golaszewski
2024-10-21  7:40   ` Miquel Raynal
2024-10-21 10:02 ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241007122350.75285-3-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=bastien.curutchet@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).