public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Rickard Andersson <rickard.andersson@axis.com>
To: <richard@nod.at>, <chengzhihao1@huawei.com>,
	<linux-mtd@lists.infradead.org>, <rickard314.andersson@gmail.com>
Cc: <rickard.andersson@axis.com>, <kernel@axis.com>
Subject: [PATCH v2 02/10] ubi: Expose mean erase counter for fastmap in sysfs
Date: Fri, 11 Oct 2024 11:21:26 +0200	[thread overview]
Message-ID: <20241011092134.2909496-2-rickard.andersson@axis.com> (raw)
In-Reply-To: <20241011092134.2909496-1-rickard.andersson@axis.com>

Since the fastmap area has its own wear levelling it is valuable to
provide a mean value for that area. This value can be used in order
to estimate life expectancy of the flash.

Signed-off-by: Rickard Andersson <rickard.andersson@axis.com>
---
 drivers/mtd/ubi/build.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index fa38c434e447..3633c743e7d1 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -133,6 +133,10 @@ static struct device_attribute dev_max_ec =
 	__ATTR(max_ec, S_IRUGO, dev_attribute_show, NULL);
 static struct device_attribute dev_mean_ec =
 	__ATTR(mean_ec, S_IRUGO, dev_attribute_show, NULL);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+static struct device_attribute dev_mean_ec_fastmap =
+	__ATTR(mean_ec_fastmap, S_IRUGO, dev_attribute_show, NULL);
+#endif
 static struct device_attribute dev_reserved_for_bad =
 	__ATTR(reserved_for_bad, S_IRUGO, dev_attribute_show, NULL);
 static struct device_attribute dev_bad_peb_count =
@@ -413,6 +417,10 @@ static ssize_t dev_attribute_show(struct device *dev,
 		ret = sprintf(buf, "%d\n", ubi->max_ec);
 	else if (attr == &dev_mean_ec)
 		ret = sprintf(buf, "%d\n", ubi_calc_mean_ec(ubi, 0, ubi->peb_count));
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	else if (attr == &dev_mean_ec_fastmap)
+		ret = sprintf(buf, "%d\n", ubi_calc_mean_ec(ubi, 0, UBI_FM_MAX_START));
+#endif
 	else if (attr == &dev_reserved_for_bad)
 		ret = sprintf(buf, "%d\n", ubi->beb_rsvd_pebs);
 	else if (attr == &dev_bad_peb_count)
@@ -440,6 +448,9 @@ static struct attribute *ubi_dev_attrs[] = {
 	&dev_volumes_count.attr,
 	&dev_max_ec.attr,
 	&dev_mean_ec.attr,
+#ifdef CONFIG_MTD_UBI_FASTMAP
+	&dev_mean_ec_fastmap.attr,
+#endif
 	&dev_reserved_for_bad.attr,
 	&dev_bad_peb_count.attr,
 	&dev_max_vol_count.attr,
-- 
2.30.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2024-10-11  9:22 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-11  9:21 [PATCH v2 01/10] ubi: Expose mean erase counter in sysfs Rickard Andersson
2024-10-11  9:21 ` Rickard Andersson [this message]
2024-10-11 12:02   ` [PATCH v2 02/10] ubi: Expose mean erase counter for fastmap " Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 03/10] ubi: Expose max " Rickard Andersson
2024-10-11 12:03   ` Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 04/10] ubi: Expose mean erase counter for data " Rickard Andersson
2024-10-11 12:04   ` Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 05/10] ubi: Expose max " Rickard Andersson
2024-10-11 12:04   ` Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 06/10] ubi: Add mean erase counter sysfs attribute Rickard Andersson
2024-10-11 12:06   ` Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 07/10] ubi: Add mean erase counter sysfs attribute for fastmap area Rickard Andersson
2024-10-11 12:06   ` Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 08/10] ubi: Add max " Rickard Andersson
2024-10-11 12:06   ` Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 09/10] ubi: Add mean erase counter sysfs attribute for data area Rickard Andersson
2024-10-11 12:08   ` Zhihao Cheng
2024-10-11  9:21 ` [PATCH v2 10/10] ubi: Add max " Rickard Andersson
2024-10-11 12:08   ` Zhihao Cheng
2024-10-11 12:01 ` [PATCH v2 01/10] ubi: Expose mean erase counter in sysfs Zhihao Cheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241011092134.2909496-2-rickard.andersson@axis.com \
    --to=rickard.andersson@axis.com \
    --cc=chengzhihao1@huawei.com \
    --cc=kernel@axis.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=rickard314.andersson@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox