From: Rickard Andersson <rickard.andersson@axis.com>
To: <richard@nod.at>, <chengzhihao1@huawei.com>,
<linux-mtd@lists.infradead.org>, <rickard314.andersson@gmail.com>
Cc: <rickard.andersson@axis.com>, <kernel@axis.com>
Subject: [PATCH v3 02/10] ubi: Expose mean erase counter for fastmap in sysfs
Date: Fri, 11 Oct 2024 14:58:56 +0200 [thread overview]
Message-ID: <20241011125904.2915983-2-rickard.andersson@axis.com> (raw)
In-Reply-To: <20241011125904.2915983-1-rickard.andersson@axis.com>
Since the fastmap area has its own wear levelling it is valuable to
provide a mean value for that area. This value can be used in order
to estimate life expectancy of the flash.
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Rickard Andersson <rickard.andersson@axis.com>
---
drivers/mtd/ubi/build.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 231ca288f397..1c531d623a62 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -133,6 +133,10 @@ static struct device_attribute dev_max_ec =
__ATTR(max_ec, S_IRUGO, dev_attribute_show, NULL);
static struct device_attribute dev_mean_ec =
__ATTR(mean_ec, S_IRUGO, dev_attribute_show, NULL);
+#ifdef CONFIG_MTD_UBI_FASTMAP
+static struct device_attribute dev_mean_ec_fastmap =
+ __ATTR(mean_ec_fastmap, S_IRUGO, dev_attribute_show, NULL);
+#endif
static struct device_attribute dev_reserved_for_bad =
__ATTR(reserved_for_bad, S_IRUGO, dev_attribute_show, NULL);
static struct device_attribute dev_bad_peb_count =
@@ -411,6 +415,10 @@ static ssize_t dev_attribute_show(struct device *dev,
ret = sprintf(buf, "%d\n", ubi->max_ec);
else if (attr == &dev_mean_ec)
ret = sprintf(buf, "%d\n", ubi_calc_mean_ec(ubi, 0, ubi->peb_count));
+#ifdef CONFIG_MTD_UBI_FASTMAP
+ else if (attr == &dev_mean_ec_fastmap)
+ ret = sprintf(buf, "%d\n", ubi_calc_mean_ec(ubi, 0, UBI_FM_MAX_START));
+#endif
else if (attr == &dev_reserved_for_bad)
ret = sprintf(buf, "%d\n", ubi->beb_rsvd_pebs);
else if (attr == &dev_bad_peb_count)
@@ -438,6 +446,9 @@ static struct attribute *ubi_dev_attrs[] = {
&dev_volumes_count.attr,
&dev_max_ec.attr,
&dev_mean_ec.attr,
+#ifdef CONFIG_MTD_UBI_FASTMAP
+ &dev_mean_ec_fastmap.attr,
+#endif
&dev_reserved_for_bad.attr,
&dev_bad_peb_count.attr,
&dev_max_vol_count.attr,
--
2.30.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2024-10-11 13:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-11 12:58 [PATCH v3 01/10] ubi: Expose mean erase counter in sysfs Rickard Andersson
2024-10-11 12:58 ` Rickard Andersson [this message]
2024-11-06 20:20 ` [PATCH v3 02/10] ubi: Expose mean erase counter for fastmap " Richard Weinberger
2024-11-07 10:28 ` Rickard x Andersson
2024-11-07 11:31 ` Richard Weinberger
2024-11-07 12:12 ` Rickard x Andersson
2024-10-11 12:58 ` [PATCH v3 03/10] ubi: Expose max " Rickard Andersson
2024-10-11 12:58 ` [PATCH v3 04/10] ubi: Expose mean erase counter for data " Rickard Andersson
2024-10-11 12:58 ` [PATCH v3 05/10] ubi: Expose max " Rickard Andersson
2024-10-11 12:59 ` [PATCH v3 06/10] ubi: Add mean erase counter sysfs attribute Rickard Andersson
2024-10-11 12:59 ` [PATCH v3 07/10] ubi: Add mean erase counter sysfs attribute for fastmap area Rickard Andersson
2024-10-11 12:59 ` [PATCH v3 08/10] ubi: Add max " Rickard Andersson
2024-10-11 12:59 ` [PATCH v3 09/10] ubi: Add mean erase counter sysfs attribute for data area Rickard Andersson
2024-10-11 12:59 ` [PATCH v3 10/10] ubi: Add max " Rickard Andersson
2024-11-06 20:34 ` [PATCH v3 01/10] ubi: Expose mean erase counter in sysfs Richard Weinberger
2024-11-07 1:39 ` Zhihao Cheng
2024-11-14 18:50 ` Richard Weinberger
2024-11-15 9:00 ` Rickard x Andersson
2024-11-16 2:55 ` Zhihao Cheng
2024-11-18 17:00 ` Rickard X Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241011125904.2915983-2-rickard.andersson@axis.com \
--to=rickard.andersson@axis.com \
--cc=chengzhihao1@huawei.com \
--cc=kernel@axis.com \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=rickard314.andersson@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox