linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Gabor Juhos <j4g8y7@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	 Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	 Gabor Juhos <j4g8y7@gmail.com>
Subject: [PATCH] mtd: nand: qpic-common: remove a bunch of unused defines
Date: Thu, 26 Jun 2025 17:52:39 +0200	[thread overview]
Message-ID: <20250626-qpic_common-unused-defines-v1-1-e31c9e2074c8@gmail.com> (raw)

A bunch of definitions in the 'nand-qpic-common.h' header became
unused after the conversion of the 'qcom_nandc' and 'spi-qpic-snand'
drivers to use the FIELD_PREP() macro, so remove those.

No functional changes.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
---
 include/linux/mtd/nand-qpic-common.h | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/include/linux/mtd/nand-qpic-common.h b/include/linux/mtd/nand-qpic-common.h
index e8462deda6dbf61f99bbcb39e7cb12cdf66898fd..aa9c5195dc5dde943f4ab23be32d7f900cf959c0 100644
--- a/include/linux/mtd/nand-qpic-common.h
+++ b/include/linux/mtd/nand-qpic-common.h
@@ -71,14 +71,10 @@
 
 /* NAND_DEVn_CFG0 bits */
 #define	DISABLE_STATUS_AFTER_WRITE	BIT(4)
-#define	CW_PER_PAGE			6
 #define	CW_PER_PAGE_MASK		GENMASK(8, 6)
-#define	UD_SIZE_BYTES			9
 #define	UD_SIZE_BYTES_MASK		GENMASK(18, 9)
 #define	ECC_PARITY_SIZE_BYTES_RS	GENMASK(22, 19)
-#define	SPARE_SIZE_BYTES		23
 #define	SPARE_SIZE_BYTES_MASK		GENMASK(26, 23)
-#define	NUM_ADDR_CYCLES			27
 #define	NUM_ADDR_CYCLES_MASK		GENMASK(29, 27)
 #define	STATUS_BFR_READ			BIT(30)
 #define	SET_RD_MODE_AFTER_STATUS	BIT(31)
@@ -86,24 +82,18 @@
 /* NAND_DEVn_CFG0 bits */
 #define	DEV0_CFG1_ECC_DISABLE		BIT(0)
 #define	WIDE_FLASH			BIT(1)
-#define	NAND_RECOVERY_CYCLES		2
 #define	NAND_RECOVERY_CYCLES_MASK	GENMASK(4, 2)
 #define	CS_ACTIVE_BSY			BIT(5)
-#define	BAD_BLOCK_BYTE_NUM		6
 #define	BAD_BLOCK_BYTE_NUM_MASK		GENMASK(15, 6)
 #define	BAD_BLOCK_IN_SPARE_AREA		BIT(16)
-#define	WR_RD_BSY_GAP			17
 #define	WR_RD_BSY_GAP_MASK		GENMASK(22, 17)
 #define	ENABLE_BCH_ECC			BIT(27)
 
 /* NAND_DEV0_ECC_CFG bits */
 #define	ECC_CFG_ECC_DISABLE		BIT(0)
 #define	ECC_SW_RESET			BIT(1)
-#define	ECC_MODE			4
 #define	ECC_MODE_MASK			GENMASK(5, 4)
-#define	ECC_PARITY_SIZE_BYTES_BCH	8
 #define	ECC_PARITY_SIZE_BYTES_BCH_MASK	GENMASK(12, 8)
-#define	ECC_NUM_DATA_BYTES		16
 #define	ECC_NUM_DATA_BYTES_MASK		GENMASK(25, 16)
 #define	ECC_FORCE_CLK_OPEN		BIT(30)
 
@@ -118,7 +108,6 @@
 #define	SEQ_READ_START_VLD		BIT(4)
 
 /* NAND_EBI2_ECC_BUF_CFG bits */
-#define	NUM_STEPS			0
 #define	NUM_STEPS_MASK			GENMASK(9, 0)
 
 /* NAND_ERASED_CW_DETECT_CFG bits */
@@ -139,11 +128,8 @@
 #define	ERASED_CW			(CODEWORD_ALL_ERASED | CODEWORD_ERASED)
 
 /* NAND_READ_LOCATION_n bits */
-#define READ_LOCATION_OFFSET		0
 #define READ_LOCATION_OFFSET_MASK	GENMASK(9, 0)
-#define READ_LOCATION_SIZE		16
 #define READ_LOCATION_SIZE_MASK		GENMASK(25, 16)
-#define READ_LOCATION_LAST		31
 #define READ_LOCATION_LAST_MASK		BIT(31)
 
 /* Version Mask */

---
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
change-id: 20250626-qpic_common-unused-defines-162e59abed5d

Best regards,
-- 
Gabor Juhos <j4g8y7@gmail.com>


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2025-06-26 17:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-26 15:52 Gabor Juhos [this message]
2025-07-28 10:17 ` [PATCH] mtd: nand: qpic-common: remove a bunch of unused defines Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250626-qpic_common-unused-defines-v1-1-e31c9e2074c8@gmail.com \
    --to=j4g8y7@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).