Re: [PATCH 1/1] dt-bindings: mtd: convert lpc32xx-mlc.txt to yaml format

[Rob Herring <robh@kernel.org>]

On Mon, Jun 23, 2025 at 04:26:42PM -0400, Frank Li wrote:
> Convert lpc32xx-mlc.txt to yaml format.
> 
> Additional changes:
> - add ref to nand-controller.yaml.
> - replace _ with - in property names.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../devicetree/bindings/mtd/lpc32xx-mlc.txt   | 50 ------------
>  .../bindings/mtd/nxp,lpc3220-mlc.yaml         | 81 +++++++++++++++++++
>  2 files changed, 81 insertions(+), 50 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
>  create mode 100644 Documentation/devicetree/bindings/mtd/nxp,lpc3220-mlc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
> deleted file mode 100644
> index 64c06aa05ac71..0000000000000
> --- a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -NXP LPC32xx SoC NAND MLC controller
> -
> -Required properties:
> -- compatible: "nxp,lpc3220-mlc"
> -- reg: Address and size of the controller
> -- interrupts: The NAND interrupt specification
> -- gpios: GPIO specification for NAND write protect
> -
> -The following required properties are very controller specific. See the LPC32xx
> -User Manual 7.5.14 MLC NAND Timing Register (the values here are specified in
> -Hz, to make them independent of actual clock speed and to provide for good
> -accuracy:)
> -- nxp,tcea_delay: TCEA_DELAY
> -- nxp,busy_delay: BUSY_DELAY
> -- nxp,nand_ta: NAND_TA
> -- nxp,rd_high: RD_HIGH
> -- nxp,rd_low: RD_LOW
> -- nxp,wr_high: WR_HIGH
> -- nxp,wr_low: WR_LOW
> -
> -Optional subnodes:
> -- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
> -
> -Example:
> -
> -	mlc: flash@200a8000 {
> -		compatible = "nxp,lpc3220-mlc";
> -		reg = <0x200A8000 0x11000>;
> -		interrupts = <11 0>;
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -
> -		nxp,tcea-delay = <333333333>;
> -		nxp,busy-delay = <10000000>;
> -		nxp,nand-ta = <18181818>;
> -		nxp,rd-high = <31250000>;
> -		nxp,rd-low = <45454545>;
> -		nxp,wr-high = <40000000>;
> -		nxp,wr-low = <83333333>;
> -		gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
> -
> -		mtd0@00000000 {
> -			label = "boot";
> -			reg = <0x00000000 0x00064000>;
> -			read-only;
> -		};
> -
> -		...
> -
> -	};
> diff --git a/Documentation/devicetree/bindings/mtd/nxp,lpc3220-mlc.yaml b/Documentation/devicetree/bindings/mtd/nxp,lpc3220-mlc.yaml
> new file mode 100644
> index 0000000000000..acc430db5244e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/nxp,lpc3220-mlc.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/nxp,lpc3220-mlc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP LPC32xx SoC NAND MLC controller
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +
> +properties:
> +  compatible:
> +    const: nxp,lpc3220-mlc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  gpios:
> +    maxItems: 1
> +    description: GPIO specification for NAND write protect
> +
> +  nxp,tcea-delay:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: TCEA_DELAY in Hz
> +
> +  nxp,busy-delay:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: BUSY_DELAY in Hz
> +
> +  nxp,nand-ta:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: NAND_TA in Hz
> +
> +  nxp,rd-high:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: RD_HIGH in Hz
> +
> +  nxp,rd-low:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: RD_LOW in Hz
> +
> +  nxp,wr-high:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: WR_HIGH in Hz
> +
> +  nxp,wr-low:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: WR_LOW in Hz
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - gpios
> +
> +allOf:
> +  - $ref: nand-controller.yaml

Do either of these use this? They don't define 'nand' chip nodes, do 
they?

No partitions on this one?

Rob


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/