From: Cheng Ming Lin <linchengming884@gmail.com>
To: stable@vger.kernel.org
Cc: tudor.ambarus@linaro.org, pratyush@kernel.org, mwalle@kernel.org,
miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com,
linux-mtd@lists.infradead.org, alvinzhou@mxic.com.tw,
Cheng Ming Lin <chengminglin@mxic.com.tw>
Subject: [PATCH 6.12.y 1/2] mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program
Date: Wed, 1 Jul 2026 10:42:03 +0800 [thread overview]
Message-ID: <20260701024204.2730472-1-linchengming884@gmail.com> (raw)
From: Cheng Ming Lin <chengminglin@mxic.com.tw>
commit 798aafeffb369c5eb36e406b18970ef27baa820d upstream.
Although certain Macronix NOR flash support the Quad Input Page Program
feature, the corresponding information in the 4-byte Address Instruction
Table of these flash is not properly filled. As a result, this feature
cannot be enabled as expected.
To address this issue, a post_sfdp fixups implementation is required to
correct the missing information.
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Link: https://lore.kernel.org/r/20250211063028.382169-2-linchengming884@gmail.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
drivers/mtd/spi-nor/macronix.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index ea6be95e75a5..678ebaa220ca 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -28,8 +28,26 @@ mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
return 0;
}
+static int
+macronix_qpp4b_post_sfdp_fixups(struct spi_nor *nor)
+{
+ /* PP_1_1_4_4B is supported but missing in 4BAIT. */
+ struct spi_nor_flash_parameter *params = nor->params;
+
+ params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_4;
+ spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP_1_1_4],
+ SPINOR_OP_PP_1_1_4_4B, SNOR_PROTO_1_1_4);
+
+ return 0;
+}
+
static const struct spi_nor_fixups mx25l25635_fixups = {
.post_bfpt = mx25l25635_post_bfpt_fixups,
+ .post_sfdp = macronix_qpp4b_post_sfdp_fixups,
+};
+
+static const struct spi_nor_fixups macronix_qpp4b_fixups = {
+ .post_sfdp = macronix_qpp4b_post_sfdp_fixups,
};
static const struct flash_info macronix_nor_parts[] = {
@@ -85,11 +103,13 @@ static const struct flash_info macronix_nor_parts[] = {
.size = SZ_64M,
.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
.fixup_flags = SPI_NOR_4B_OPCODES,
+ .fixups = ¯onix_qpp4b_fixups,
}, {
.id = SNOR_ID(0xc2, 0x20, 0x1b),
.name = "mx66l1g45g",
.size = SZ_128M,
.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
+ .fixups = ¯onix_qpp4b_fixups,
}, {
.id = SNOR_ID(0xc2, 0x23, 0x14),
.name = "mx25v8035f",
@@ -137,18 +157,21 @@ static const struct flash_info macronix_nor_parts[] = {
.size = SZ_64M,
.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
.fixup_flags = SPI_NOR_4B_OPCODES,
+ .fixups = ¯onix_qpp4b_fixups,
}, {
.id = SNOR_ID(0xc2, 0x25, 0x3a),
.name = "mx66u51235f",
.size = SZ_64M,
.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
.fixup_flags = SPI_NOR_4B_OPCODES,
+ .fixups = ¯onix_qpp4b_fixups,
}, {
.id = SNOR_ID(0xc2, 0x25, 0x3c),
.name = "mx66u2g45g",
.size = SZ_256M,
.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
.fixup_flags = SPI_NOR_4B_OPCODES,
+ .fixups = ¯onix_qpp4b_fixups,
}, {
.id = SNOR_ID(0xc2, 0x26, 0x18),
.name = "mx25l12855e",
--
2.25.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2026-07-01 2:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 2:42 Cheng Ming Lin [this message]
2026-07-01 2:42 ` [PATCH 6.12.y 2/2] mtd: spi-nor: macronix: add support for mx66{l2, u1}g45g Cheng Ming Lin
2026-07-02 0:38 ` [PATCH 6.12.y 1/2] mtd: spi-nor: macronix: Add post_sfdp fixups for Quad Input Page Program Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260701024204.2730472-1-linchengming884@gmail.com \
--to=linchengming884@gmail.com \
--cc=alvinzhou@mxic.com.tw \
--cc=chengminglin@mxic.com.tw \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=stable@vger.kernel.org \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox