From: Huasin Liao <huasinliao@gmail.com>
To: miquel.raynal@bootlin.com, vigneshr@ti.com
Cc: richard@nod.at, tudor.ambarus@linaro.org,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
huasin.liao@airoha.com, Huasin Liao <huasinliao@gmail.com>
Subject: [PATCH] mtd: spinand: winbond: add support for W25N04LV
Date: Sun, 16 Aug 2026 17:31:24 +0800 [thread overview]
Message-ID: <20260816093124.12325-1-huasinliao@gmail.com> (raw)
Add support for the Winbond W25N04LV. Tested on an Airoha
AN7581-based board with the on-board W25N04LV, verified
erase/read/write.
Link: https://www.winbond.com/hq/product/code-storage-flash-memory/qspinand-flash/?__locale=en&partNo=W25N04LV
Cc: huasin.liao@airoha.com
Signed-off-by: Huasin Liao <huasinliao@gmail.com>
---
drivers/mtd/nand/spi/winbond.c | 38 ++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 9b78c1e6cbc9..892220a12b22 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -345,6 +345,35 @@ static const struct mtd_ooblayout_ops w25n02kv_ooblayout = {
.free = w25n02kv_ooblayout_free,
};
+static int w25n04lv_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = 128 + (16 * section);
+ region->length = 13;
+
+ return 0;
+}
+
+static int w25n04lv_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 2;
+ region->length = 14;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops w25n04lv_ooblayout = {
+ .ecc = w25n04lv_ooblayout_ecc,
+ .free = w25n04lv_ooblayout_free,
+};
+
static int w25n01jw_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
@@ -759,6 +788,15 @@ static const struct spinand_info winbond_spinand_table[] = {
&update_cache_variants),
0,
SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+ SPINAND_INFO("W25N04LV", /* 3.3V */
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x8b, 0x23),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ 0,
+ SPINAND_ECCINFO(&w25n04lv_ooblayout, w25n02kv_ecc_get_status)),
SPINAND_INFO("W25N04KW", /* 1.8V */
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x23),
NAND_MEMORG(1, 2048, 128, 64, 4096, 40, 1, 1, 1),
--
2.39.3 (Apple Git-146)
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2026-08-16 9:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-16 9:31 Huasin Liao [this message]
2026-08-16 11:19 ` [PATCH] mtd: spinand: winbond: add support for W25N04LV Dominique Martinet
2026-08-16 16:56 ` Huasin Liao
2026-08-25 9:09 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260816093124.12325-1-huasinliao@gmail.com \
--to=huasinliao@gmail.com \
--cc=huasin.liao@airoha.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox