From: zhouminqiang <zhouminqiang2@huawei.com>
To: <dwmw2@infradead.org>, <richard@nod.at>
Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<chengzhihao1@huawei.com>, <yangerkun@huawei.com>,
<yi.zhang@huawei.com>
Subject: [PATCH 3/6] jffs2: add write verification to direct page writes in flash_writev
Date: Thu, 20 Aug 2026 18:49:59 +0800 [thread overview]
Message-ID: <20260820105003.2525647-4-zhouminqiang2@huawei.com> (raw)
In-Reply-To: <20260820105003.2525647-1-zhouminqiang2@huawei.com>
jffs2_flash_writev() performs writes in three phases: phase 1 fills
the write buffer and flushes it when full, phase 2 writes full pages
directly via mtd_write() bypassing the buffer, and phase 3 fills the
remaining data into the write buffer.
Phases 1 and 3 both invoke __jffs2_flush_wbuf() when the buffer is
full, which includes write-back verification when
CONFIG_JFFS2_FS_WBUF_VERIFY is enabled. However phase 2, which
handles the bulk of the write data, calls mtd_write() directly
without any verification.
Phase 2 direct writes may span multiple wbuf_pagesize pages. Extend
jffs2_verify_write() with a len parameter to specify the data length
to verify, and add the verification call after the phase 2
mtd_write() to cover this gap.
Signed-off-by: zhouminqiang <zhouminqiang2@huawei.com>
---
fs/jffs2/wbuf.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index da6da813a4ef..3e99587f40e4 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -229,33 +229,33 @@ static struct jffs2_raw_node_ref **jffs2_incore_replace_raw(struct jffs2_sb_info
#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
- uint32_t ofs)
+ uint32_t ofs, size_t len)
{
int ret = 0;
size_t retlen, i;
char *eccstr;
void *verify_buf;
- verify_buf = __vmalloc(c->wbuf_pagesize, GFP_NOFS);
+ verify_buf = __vmalloc(len, GFP_NOFS);
if (!verify_buf) {
pr_warn("%s(): verify buffer allocation failed, skipping verification\n",
__func__);
return 0;
}
- ret = mtd_read(c->mtd, ofs, c->wbuf_pagesize, &retlen, verify_buf);
+ ret = mtd_read(c->mtd, ofs, len, &retlen, verify_buf);
if (ret && ret != -EUCLEAN && ret != -EBADMSG) {
pr_warn("%s(): Read back of page at %08x failed: %d\n",
__func__, ofs, ret);
goto out_free;
- } else if (retlen != c->wbuf_pagesize) {
- pr_warn("%s(): Read back of page at %08x gave short read: %zu not %d\n",
- __func__, ofs, retlen, c->wbuf_pagesize);
+ } else if (retlen != len) {
+ pr_warn("%s(): Read back of page at %08x gave short read: %zu not %zu\n",
+ __func__, ofs, retlen, len);
ret = -EIO;
goto out_free;
}
- for (i = 0; i < c->wbuf_pagesize; i++) {
+ for (i = 0; i < len; i++) {
uint8_t c1 = ((uint8_t *)buf)[i];
uint8_t c2 = ((uint8_t *)verify_buf)[i];
int dump_len;
@@ -270,9 +270,9 @@ static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
else
eccstr = "OK or unused";
- dump_len = min_t(int, 128, c->wbuf_pagesize - i);
- pr_warn("Write verify error (ECC %s) at %08x (+%zu/%d). Wrote:\n",
- eccstr, ofs, i, c->wbuf_pagesize);
+ dump_len = min_t(int, 128, len - i);
+ pr_warn("Write verify error (ECC %s) at %08x (+%zu/%zu). Wrote:\n",
+ eccstr, ofs, i, len);
print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_OFFSET, 16, 1,
buf + i, dump_len, 0);
@@ -292,7 +292,7 @@ static int jffs2_verify_write(struct jffs2_sb_info *c, unsigned char *buf,
return ret;
}
#else
-#define jffs2_verify_write(c,b,o) (0)
+#define jffs2_verify_write(c,b,o,l) (0)
#endif
/* Recover from failure to write wbuf. Recover the nodes up to the
@@ -455,7 +455,7 @@ static void jffs2_wbuf_recover(struct jffs2_sb_info *c)
ret = mtd_write(c->mtd, ofs, towrite, &retlen,
rewrite_buf);
- if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs)) {
+ if (ret || retlen != towrite || jffs2_verify_write(c, rewrite_buf, ofs, towrite)) {
/* Argh. We tried. Really we did. */
pr_crit("Recovery of wbuf failed due to a second write error\n");
kfree(buf);
@@ -672,7 +672,10 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad)
retlen, c->wbuf_pagesize);
ret = -EIO;
goto wfail;
- } else if ((ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs))) {
+ }
+
+ ret = jffs2_verify_write(c, c->wbuf, c->wbuf_ofs, c->wbuf_pagesize);
+ if (ret) {
wfail:
jffs2_wbuf_recover(c);
@@ -904,6 +907,10 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs,
if (ret < 0 || wbuf_retlen != PAGE_DIV(vlen))
goto outfile;
+ ret = jffs2_verify_write(c, v, outvec_to, PAGE_DIV(vlen));
+ if (ret)
+ goto outfile;
+
vlen -= wbuf_retlen;
outvec_to += wbuf_retlen;
c->wbuf_ofs = outvec_to;
--
2.52.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2026-08-20 10:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-20 10:49 [PATCH 0/6] jffs2: extend write verification to all write paths zhouminqiang
2026-08-20 10:49 ` [PATCH 1/6] jffs2: replace per-superblock verify buffer with per-write buffer zhouminqiang
2026-08-20 10:49 ` [PATCH 2/6] jffs2: write verify: replace memcmp with byte-by-byte comparison zhouminqiang
2026-08-20 10:49 ` zhouminqiang [this message]
2026-08-20 10:50 ` [PATCH 4/6] jffs2: add write verification to NOR direct write paths zhouminqiang
2026-08-20 10:50 ` [PATCH 5/6] jffs2: rename CONFIG_JFFS2_FS_WBUF_VERIFY to CONFIG_JFFS2_FS_WRITE_VERIFY zhouminqiang
2026-08-20 10:50 ` [PATCH 6/6] jffs2: add runtime toggle for write verification zhouminqiang
2026-08-20 18:58 ` [PATCH 0/6] jffs2: extend write verification to all write paths Richard Weinberger
2026-08-20 20:46 ` David Woodhouse
2026-08-21 3:37 ` zhouminqiang
2026-08-21 6:31 ` Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260820105003.2525647-4-zhouminqiang2@huawei.com \
--to=zhouminqiang2@huawei.com \
--cc=chengzhihao1@huawei.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=yangerkun@huawei.com \
--cc=yi.zhang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox