Re: [PATCH v2 13/22] mtd: rawnand: Pass the CS line to be selected in struct nand_operation

[Janusz Krzysztofik <jmkrzyszt@gmail.com>]

Hi Boris,

On Tuesday, November 6, 2018 4:08:01 PM CET Boris Brezillon wrote:
> In order to deprecate the ->select_chip hook we need to pass the CS
> line a NAND operations are targeting. This is done through the
> addition of a cs field to the nand_operation struct.
> 
> We also need to keep track of the currently selected target to
> properly initialize op->cs, hence the ->cur_cs field addition to the
> nand_chip struct.
> 
> Note that op->cs is not assigned in nand_exec_op() because we might
> rework the way we execute NAND operations in the future (adopt a
> queuing mechanism instead of the serialization we have right now).
> 
> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
> Changes in v2:
> - Initialize ->cur_cs
> ---
>  drivers/mtd/nand/raw/internals.h  |  3 +++
>  drivers/mtd/nand/raw/nand_base.c  | 39 +++++++++++++++++--------------
>  drivers/mtd/nand/raw/nand_hynix.c |  4 ++--
>  include/linux/mtd/rawnand.h       | 11 ++++++++-
>  4 files changed, 37 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/internals.h b/drivers/mtd/nand/raw/internals.h
> index 6e2f61fbc5f0..b62728d5884b 100644
> --- a/drivers/mtd/nand/raw/internals.h
> +++ b/drivers/mtd/nand/raw/internals.h
> @@ -101,6 +101,9 @@ static inline int nand_exec_op(struct nand_chip *chip,
>  	if (!chip->exec_op)
>  		return -ENOTSUPP;
>  
> +	if (WARN_ON(op->cs >= chip->numchips))
> +		return -EINVAL;

This needs a fix to nand_scan_ident() like the following:

--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5034,10 +5034,11 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 
 	/* Set the default functions */
 	nand_set_defaults(chip);
 
 	/* Read the flash type */
+	chip->numchips = 1;
 	ret = nand_detect(chip, table);
 	if (ret) {
 		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
 			pr_warn("No NAND device found\n");
 		nand_deselect_target(chip);


Otherwise nand_detect() fails for me in nand_exec_op() called from the very 
first nand_reset_op():

    WARNING: CPU: 0 PID: 1 at drivers/mtd/nand/raw/internals.h:104 nand_reset_op+0x100/0x17c
    ...
    nand: No NAND device found

With that issue fixed one way or another, you can add my:

	Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>

to your whole series.

Thanks,
Janusz


PS.
I'm ready to submit a series which converts ams-delta-nand to use GPIO 
API for data I/O.  My only concerns is which branch should I rebase it on.