Re: [PATCH v4 3/4] mtd: spi-nor: winbond: add OTP support to w25q32fw/jw

[Michael Walle <michael@walle.cc>]

Am 2021-03-15 09:26, schrieb Tudor.Ambarus@microchip.com:
> On 3/6/21 2:05 AM, Michael Walle wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know 
>> the content is safe
>> 
>> With all the helper functions in place, add OTP support for the 
>> Winbond
>> W25Q32JW and W25Q32FW.
>> 
>> Both were tested on a LS1028A SoC with a NXP FSPI controller.
>> 
>> Signed-off-by: Michael Walle <michael@walle.cc>
>> ---
>>  drivers/mtd/spi-nor/winbond.c | 17 +++++++++++++++--
>>  1 file changed, 15 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/mtd/spi-nor/winbond.c 
>> b/drivers/mtd/spi-nor/winbond.c
>> index e5dfa786f190..9a3f8ff007fd 100644
>> --- a/drivers/mtd/spi-nor/winbond.c
>> +++ b/drivers/mtd/spi-nor/winbond.c
>> @@ -55,14 +55,18 @@ static const struct flash_info winbond_parts[] = {
>>         { "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
>>         { "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
>>                            SECT_4K | SPI_NOR_DUAL_READ | 
>> SPI_NOR_QUAD_READ |
>> -                          SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>> +                          SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>> +                          OTP_INFO(256, 3, 0x1000, 0x1000)
>> +       },
>> +
>>         { "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64,
>>                            SECT_4K | SPI_NOR_DUAL_READ | 
>> SPI_NOR_QUAD_READ |
>>                            SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>>         },
>>         { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
>>                             SECT_4K | SPI_NOR_DUAL_READ | 
>> SPI_NOR_QUAD_READ |
>> -                           SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>> +                           SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
>> +                           OTP_INFO(256, 3, 0x1000, 0x1000) },
>>         { "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128,
>>                             SECT_4K | SPI_NOR_DUAL_READ | 
>> SPI_NOR_QUAD_READ |
>>                             SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
>> @@ -131,9 +135,18 @@ static int winbond_set_4byte_addr_mode(struct 
>> spi_nor *nor, bool enable)
>>         return spi_nor_write_disable(nor);
>>  }
>> 
>> +static const struct spi_nor_otp_ops winbond_otp_ops = {
>> +       .read = spi_nor_otp_read_secr,
>> +       .write = spi_nor_otp_write_secr,
>> +       .lock = spi_nor_otp_lock_sr2,
>> +       .is_locked = spi_nor_otp_is_locked_sr2,
>> +};
> 
> Should we have this in otp.c? It can be shared with gigadevice as well
> as far as I understood.

It should work in principle for both vendors, but I couldn't test it. So
for now, I've kept it private to winbond.c. If there will be OTP support
for other flashes with the same ops, it should be moved.

-michael

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/