From: "marco_cantu_ranzani@libero.it" <marco_cantu_ranzani@libero.it>
To: <linux-mtd@lists.infradead.org>
Subject: Error on sync / reboot
Date: Mon, 17 Oct 2011 17:17:10 +0200 (CEST) [thread overview]
Message-ID: <29722548.1110771318864630977.JavaMail.defaultUser@defaultHost> (raw)
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 559:512,
written 0 bytes
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 559
UBI: run torture test for PEB 559
UBI: try another PEB
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 560:512,
written 0 bytes
UBI error: do_sync_erase: cannot erase PEB 559, error -5
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 560
UBI error: erase_worker: failed to erase PEB 559, error -5
UBI: try another PEB
UBI: mark PEB 559 as bad
nand_bbt: Error while writing bad block table -5
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 561:512,
written 0 bytes
UBI error: ubi_io_mark_bad: cannot mark PEB 559 bad, error -5
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 561
UBI warning: ubi_ro_mode: switch to read-only mode
UBI: try another PEB
UBI error: ubi_io_write: read-only mode
UBI error: do_work: work failed with error code -5
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 562
UBI error: ubi_thread: ubi_bgt0d: work failed with error code -5
UBIFS error (pid 533): ubifs_leb_write: writing 2048 bytes to LEB 5:0 failed,
error -30
UBIFS warning (pid 533): ubifs_ro_mode: switched to read-only mode, error -30
Backtrace:
[<c00304d0>] (dump_backtrace+0x0/0x10c) from [<c03aea9c>]
(dump_stack+0x18/0x1c)
r7:00000005 r6:00000000 r5:c3817000 r4:ffffffe2
[<c03aea84>] (dump_stack+0x0/0x1c) from [<c01668ac>] (ubifs_ro_mode+0x68/0x74)
[<c0166844>] (ubifs_ro_mode+0x0/0x74) from [<c0166de8>]
(ubifs_leb_write+0x94/0xa0)
[<c0166d54>] (ubifs_leb_write+0x0/0xa0) from [<c016ead4>]
(ubifs_log_start_commit+0x25c/0x414)
r7:c3817000 r6:000001c8 r5:00000000 r4:00000800
[<c016e878>] (ubifs_log_start_commit+0x0/0x414) from [<c016f3f4>]
(do_commit+0x1e4/0x7c8)
[<c016f210>] (do_commit+0x0/0x7c8) from [<c016faa0>]
(ubifs_run_commit+0xc8/0x158)
[<c016f9d8>] (ubifs_run_commit+0x0/0x158) from [<c0162018>]
(ubifs_sync_fs+0x88/0xa0)
r7:00000003 r6:000001c8 r5:c3a4b158 r4:00000000
[<c0161f90>] (ubifs_sync_fs+0x0/0xa0) from [<c00cef54>]
(__sync_filesystem+0x4c/0x64)
r9:c3afa000 r8:00000000 r7:c04c0084 r6:c3972e40 r5:00000001
r4:c3972e00
[<c00cef08>] (__sync_filesystem+0x0/0x64) from [<c00cf074>]
(sync_filesystems+0x108/0x154)
r5:c3afa000 r4:c3972e00
[<c00cef6c>] (sync_filesystems+0x0/0x154) from [<c00cf11c>]
(sys_sync+0x24/0x48)
[<c00cf0f8>] (sys_sync+0x0/0x48) from [<c002bfa0>] (ret_fast_syscall+0x0/0x28)
UBIFS error (pid 533): do_commit: commit failed, error -30
ubUBIFS error (pid 523): ubifs_read_node: bad node type (0 but expected 1)
UBIFS error (pid 523): ubifs_read_node: bad node at LEB 20:87232, LEB mapping
status 1
UBIFS error (pid 523): do_readpage: cannot read page 75 of inode 100, error
-22
UBIFS error (pid 523): ubifs_read_node: bad node type (0 but expected 1)
UBIFS error (pid 523): ubifs_read_node: bad node at LEB 20:87232, LEB mapping
status 1
UBIFS error (pid 523): do_readpage: cannot read page 75 of inode 100, error
-22
*****************************************
Kernel 2.6.32
Architecture mini2440
!!! compiled without CONFIG_NAND_VERIFY_WRITE
next reply other threads:[~2011-10-17 15:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-17 15:17 marco_cantu_ranzani [this message]
2011-10-20 16:00 ` Error on sync / reboot Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29722548.1110771318864630977.JavaMail.defaultUser@defaultHost \
--to=marco_cantu_ranzani@libero.it \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox