From: Christian Eggers <ceggers@arri.de>
To: <linux-mtd@lists.infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Greg Ungerer <gerg@kernel.org>,
Michael Nazzareno Trimarchi <michael@amarulasolutions.com>,
Han Xu <han.xu@nxp.com>, Sascha Hauer <s.hauer@pengutronix.de>
Subject: Re: GPMI iMX6ull timeout on DMA
Date: Mon, 4 Oct 2021 07:54:15 +0200 [thread overview]
Message-ID: <3160469.44csPzL39Z@n95hx1g2> (raw)
In-Reply-To: <89ae32a0-9b19-4735-90eb-4ffa22aad704@kernel.org>
On Monday, 29 July 2019, 08:41:51 CEST, Greg Ungerer wrote:
> Hi Miquel,
>
> I am experiencing a problem with NAND flash DMA timeouts on
> iMX6ull based boards. The problem is very similar to that
> described in:
>
> https://linux-mtd.infradead.narkive.com/JIUulfFB/gpmi-imx6ull-timeout-on-dma
>
> That didn't come to any specific resolution that I could see
> in that thread.
Hi all,
I am joining this thread because I am also affected by this problem. I use
kernel 5.10.65-rt53 but I have seen this issue on many previous versions. In the
past I only recognized this on my development setup but now this has been found
by our testing team.
In our test setup we simply perform a reboot every 30s. After 5 to 200 cycles
the test stops due to this error.
The kernel version I use already includes:
> Han Xu <han.xu@nxp.com>
> mtd: rawnand: gpmi: Fix the random DMA timeout issue
Additionally I tried ...
> Michael Trimarchi <michael@amarulasolutions.com>
> mtd: nand: Calculate the clock before enable it
... but the problem still persists.
In my case, some registers show different values (annotated below):
>
> The boot trace on the console for me looks like this:
>
> nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
> nand: Micron MT29F2G08ABAEAWP
nand: Micron MT29F4G08ABADAH4
> nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
> gpmi-nand 1806000.gpmi-nand: DMA timeout, last DMA
> gpmi-nand 1806000.gpmi-nand: Show GPMI registers :
> gpmi-nand 1806000.gpmi-nand: offset 0x000 : 0x20830002
> gpmi-nand 1806000.gpmi-nand: offset 0x010 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x020 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x030 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x040 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x050 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x060 : 0x01c6800c
> gpmi-nand 1806000.gpmi-nand: offset 0x070 : 0x00010101
> gpmi-nand 1806000.gpmi-nand: offset 0x080 : 0xe0000000
> gpmi-nand 1806000.gpmi-nand: offset 0x090 : 0x23023336
> gpmi-nand 1806000.gpmi-nand: offset 0x0a0 : 0x000001ee
> gpmi-nand 1806000.gpmi-nand: offset 0x0b0 : 0xff000001
> gpmi-nand 1806000.gpmi-nand: offset 0x0c0 : 0x00000001
gpmi-nand 1806000.nand-controller: offset 0x0c0 : 0x00000202
> gpmi-nand 1806000.gpmi-nand: offset 0x0d0 : 0x05020000
> gpmi-nand 1806000.gpmi-nand: Show BCH registers :
> gpmi-nand 1806000.gpmi-nand: offset 0x000 : 0x00000100
gpmi-nand 1806000.nand-controller: offset 0x000 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x010 : 0x00000010
> gpmi-nand 1806000.gpmi-nand: offset 0x020 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x030 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x040 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x050 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x060 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x070 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x080 : 0x030a2080
gpmi-nand 1806000.nand-controller: offset 0x080 : 0x070a4080
> gpmi-nand 1806000.gpmi-nand: offset 0x090 : 0x083e2080
gpmi-nand 1806000.nand-controller: offset 0x090 : 0x10da4080
> gpmi-nand 1806000.gpmi-nand: offset 0x0a0 : 0x070a4080
> gpmi-nand 1806000.gpmi-nand: offset 0x0b0 : 0x10da4080
> gpmi-nand 1806000.gpmi-nand: offset 0x0c0 : 0x070a4080
> gpmi-nand 1806000.gpmi-nand: offset 0x0d0 : 0x10da4080
> gpmi-nand 1806000.gpmi-nand: offset 0x0e0 : 0x070a4080
> gpmi-nand 1806000.gpmi-nand: offset 0x0f0 : 0x10da4080
> gpmi-nand 1806000.gpmi-nand: offset 0x100 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x110 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x120 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x130 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x140 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: offset 0x150 : 0x20484342
> gpmi-nand 1806000.gpmi-nand: offset 0x160 : 0x01000000
> gpmi-nand 1806000.gpmi-nand: offset 0x170 : 0x00000000
> gpmi-nand 1806000.gpmi-nand: BCH Geometry :
> GF length : 13
> ECC Strength : 8
> Page Size in Bytes : 2110
> Metadata Size in Bytes : 10
> ECC Chunk0 Size in Bytes: 512
> ECC Chunkn Size in Bytes: 512
ECC Chunk Size in Bytes: 512
> ECC Chunk Count : 4
> Payload Size in Bytes : 2048
> Auxiliary Size in Bytes: 16
> Auxiliary Status Offset: 12
> Block Mark Byte Offset : 1999
> Block Mark Bit Offset : 0
Please let me know if further information is required.
regards
Christian
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2021-10-04 5:55 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-29 6:41 GPMI iMX6ull timeout on DMA Greg Ungerer
2019-07-29 8:36 ` Miquel Raynal
2019-07-29 8:42 ` Michael Nazzareno Trimarchi
2019-07-29 12:18 ` Greg Ungerer
2019-07-29 12:20 ` Michael Nazzareno Trimarchi
2019-07-29 12:33 ` Greg Ungerer
2019-07-29 12:47 ` Miquel Raynal
2019-07-29 12:49 ` Michael Nazzareno Trimarchi
2019-07-29 12:55 ` Miquel Raynal
2019-07-29 13:00 ` Michael Nazzareno Trimarchi
2019-07-29 13:22 ` Miquel Raynal
2019-07-29 20:00 ` Michael Nazzareno Trimarchi
2019-07-29 21:02 ` Miquel Raynal
2019-07-30 0:28 ` Greg Ungerer
2019-07-30 0:41 ` Greg Ungerer
2019-07-30 6:06 ` Greg Ungerer
2019-07-30 8:38 ` Miquel Raynal
2019-07-30 8:58 ` Boris Brezillon
2019-07-31 2:05 ` Greg Ungerer
2019-07-31 6:28 ` Boris Brezillon
2019-08-02 7:19 ` Greg Ungerer
2019-08-02 12:34 ` Greg Ungerer
2019-08-02 12:51 ` Boris Brezillon
2019-08-05 5:51 ` Greg Ungerer
2019-08-07 16:05 ` Miquel Raynal
2019-08-08 0:43 ` Greg Ungerer
2019-08-08 16:36 ` Boris Brezillon
2019-08-09 5:20 ` Greg Ungerer
2019-08-09 6:23 ` Boris Brezillon
2019-08-09 6:55 ` Greg Ungerer
2019-08-09 7:32 ` Boris Brezillon
2019-08-09 13:57 ` Greg Ungerer
2019-08-09 13:59 ` Boris Brezillon
2019-08-12 2:50 ` Greg Ungerer
2019-08-12 4:04 ` Greg Ungerer
2019-08-12 7:31 ` Boris Brezillon
2019-08-13 0:50 ` Greg Ungerer
2021-01-28 9:45 ` Michael Nazzareno Trimarchi
2021-01-28 10:26 ` Miquel Raynal
2021-01-28 10:35 ` Michael Nazzareno Trimarchi
2021-01-28 11:55 ` Michael Nazzareno Trimarchi
2021-01-29 12:43 ` Greg Ungerer
2021-01-30 9:41 ` Michael Nazzareno Trimarchi
2021-02-01 14:13 ` Miquel Raynal
2021-02-01 14:32 ` Michael Nazzareno Trimarchi
2021-02-01 15:08 ` Michael Nazzareno Trimarchi
2021-02-01 15:14 ` Miquel Raynal
2021-02-01 15:17 ` Michael Nazzareno Trimarchi
2021-10-15 20:05 ` Michael Trimarchi
2021-10-15 20:12 ` Michael Nazzareno Trimarchi
2021-10-18 7:19 ` Miquel Raynal
2021-10-18 7:33 ` Michael Nazzareno Trimarchi
2021-10-18 7:43 ` Miquel Raynal
2021-10-04 5:54 ` Christian Eggers [this message]
2021-10-04 6:27 ` Michael Nazzareno Trimarchi
2021-10-04 15:33 ` Miquel Raynal
2021-10-04 16:06 ` Han Xu
2021-10-05 6:02 ` Christian Eggers
2021-10-08 9:55 ` Christian Eggers
2021-10-08 12:08 ` Stefan Riedmüller
2021-10-08 12:27 ` Miquel Raynal
2021-10-08 13:11 ` Christian Eggers
2021-10-08 13:29 ` Miquel Raynal
2021-10-08 13:36 ` Miquel Raynal
2021-10-08 13:49 ` Christian Eggers
2021-10-08 16:07 ` Miquel Raynal
2021-10-09 5:53 ` Michael Nazzareno Trimarchi
2021-10-11 6:46 ` Miquel Raynal
2021-10-12 9:02 ` [RFC PATCH 1/2] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6 Stefan Riedmueller
2021-10-12 9:02 ` [RFC PATCH 2/2] gpmi-nand: Add ERR007117 protection for nfc_apply_timings Stefan Riedmueller
2021-10-13 5:01 ` Han Xu
2021-10-22 8:45 ` Stefan Riedmüller
2021-10-22 14:35 ` han.xu
2021-10-25 9:39 ` Stefan Riedmüller
2021-10-28 9:28 ` Stefan Riedmüller
2021-11-01 4:01 ` han.xu
2021-10-13 6:10 ` Christian Eggers
2021-10-13 6:00 ` [RFC PATCH 1/2] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6 Christian Eggers
2021-10-09 6:26 ` GPMI iMX6ull timeout on DMA Christian Eggers
2021-10-13 6:15 ` Christian Eggers
2021-10-08 13:13 ` Christian Eggers
2021-10-08 13:30 ` Miquel Raynal
2021-10-09 6:33 ` Christian Eggers
-- strict thread matches above, loose matches on Subject: below --
2018-10-02 13:22 GPMI IMX6ull timeout on dma Michael Nazzareno Trimarchi
2018-10-04 14:36 ` Michael Nazzareno Trimarchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3160469.44csPzL39Z@n95hx1g2 \
--to=ceggers@arri.de \
--cc=gerg@kernel.org \
--cc=han.xu@nxp.com \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@amarulasolutions.com \
--cc=miquel.raynal@bootlin.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).