Re: [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit

[<Tudor.Ambarus@microchip.com>]

On 4/21/22 13:56, Tudor.Ambarus@microchip.com wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 4/21/22 13:47, Takahiro Kuwano wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> On 4/21/2022 7:41 PM, Tudor.Ambarus@microchip.com wrote:
>>> On 4/21/22 12:40, tkuw584924@gmail.com wrote:
>> [...]
>>>> +/**
>>>> + * cypress_nor_quad_enable_volatile() - enable Quad I/O mode in volatile
>>>> + *                                      register.
>>>> + * @nor:       pointer to a 'struct spi_nor'
>>>> + *
>>>> + * It is recommended to update volatile registers in the field application due
>>>> + * to a risk of the non-volatile registers corruption by power interrupt. This
>>>> + * function sets Quad Enable bit in CFR1 volatile. If users set the Quad Enable
>>>> + * bit in the CFR1 non-volatile in advance (typically by a Flash programmer
>>>> + * before mounting Flash on PCB), the Quad Enable bit in the CFR1 volatile is
>>>> + * also set during Flash power-up.
>>>> + *
>>>> + * Return: 0 on success, -errno otherwise.
>>>> + */
>>>> +static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
>>>> +{
>>>> +       struct spi_mem_op op;
>>>> +       u8 cfr1v_written;
>>>> +       int ret;
>>>> +
>>>> +       op = (struct spi_mem_op)
>>>> +               CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR1V,
>>> nor->addr_width is 3, isn't it? can we use nor->addr_width instead of 3, please?
>>>
>> No, at the time this method is called, nor->addr_width is set to 4 by
>> spi_nor_set_addr_width().
> 
> I see. Allow me some time to re-read this.

Does this help you?
https://github.com/ambarus/linux-0day/commit/05f20ab7ee349628f0e2d22a4d3852038a6c8c70

Find the entire branch at:
https://github.com/ambarus/linux-0day/commits/spi-nor/next

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/