From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from majordomo by infradead.org with local (Exim 3.03 #1) id 13Fa5d-0003NI-00 for mtd-list@infradead.org; Fri, 21 Jul 2000 11:31:33 +0100 Message-ID: <397825D6.BDE058A3@sis.com.tw> Date: Fri, 21 Jul 2000 18:28:38 +0800 From: Ollie Lho MIME-Version: 1.0 To: David Woodhouse , "Ronald G. Minnich" , Joe Wang , "K.M. Liu" , mtd@infradead.org, freebios-devel@sourceforge.net Subject: SOLVED: Turnning On DOC Millennium ECC Logic Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=big5 Sender: owner-mtd@infradead.org List-ID: David, I have successfully turned on the ECC logic of DoC Millennium. The ECC logic correctly caculate the ECC on both read and write cases. Now the Millennium driver is as complete as DoC 2000 driver. I will send you a patch next Monday after I did some test (should I CC to Linus also ??). Ronald, I can now program the IPL area correctly, the IPL area can be download by the internal logic of the Millennium such that the disk on chip acts as a 512 bytes ROM when power-up. We can proceed to work on how to shrink the DRAM sizing/timing code into 512 byte. After that we will have a complete Diskless, BIOSless, maintance free enviroment which should be very useful for you cluster nodes. BTW, did you read the SPD DRAM sizing/timing code I sent to you ?? And did you reproduce the SiS FB (no VGA BIOS) stuff on your side ?? Ollie To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org