From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from majordomo by infradead.org with local (Exim 3.03 #1) id 13HqPq-0008B5-00 for mtd-list@infradead.org; Thu, 27 Jul 2000 17:21:46 +0100 Received: from [195.88.125.154] (helo=smtp.zls.de) by infradead.org with smtp (Exim 3.03 #1) id 13HqPo-0008Az-00 for mtd@infradead.org; Thu, 27 Jul 2000 17:21:44 +0100 Received: from zls.de(ws-cal.zls.de[172.16.0.35]) (1514 bytes) by smtp.zls.de via sendmail with P:smtp/R:remote_hosts/T:smtp (sender: ) id for ; Thu, 27 Jul 2000 18:22:21 +0200 (MEST) (Smail-3.2.0.109 1999-Oct-27 #3 built 1999-Nov-16) Message-ID: <398061A4.192DE8A2@zls.de> Date: Thu, 27 Jul 2000 18:21:56 +0200 From: Christian Lademann MIME-Version: 1.0 To: Karl Pitrich CC: mtd@infradead.org Subject: Re: Request: examples of using LILO or GRUB to boot from DOC References: <397F3B15.D420B9AF@zls.de> <397F46EF.417AD6CE@linuxaustria.at> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-mtd@infradead.org List-ID: Thank you for your helping hand. It worked with the "DOC123.EXB"-firmware installed and the /dev/nftla1 being the FAT12-fs created by dformat. Repartitioning the nftla worked as well but no success booting anymore. Using the M-Systems-driver, /dev/fla* and plilo repartitioning and booting works well. cu, Christian. PS: where do I find a 'as86' that is able to compile lilo? The current bin86-release found on metalab.unc.edu does not do the job. -- * Christian A. Lademann, ZLS Software GmbH mailto:cal@zls.de * ZLS Software GmbH * Frankfurter Strasse 59 Postfach 1628 mailto:zls@zls.de * D-65779 Kelkheim D-65766 Kelkheim http://www.zls.de * Telefon +49-6195-9902-0 Telefax +49-6195-900600 * Geschäftsführer John A. Shuter - Amtsgericht Königstein HRB 3105 To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org